Minka Lavery 4068-660 Installation guide

Type
Installation guide

Minka Lavery 4068-660 is a versatile and stylish lighting fixture that can elevate the ambiance of any room. Its adjustable rod length allows for customization to suit different ceiling heights and lighting needs. The fixture's multiple small loops and hook provide various options for hanging, enabling you to create a unique and personalized lighting arrangement. The included bulb ensures immediate functionality, while the ground wire and mounting strap ensure safe and secure installation.

Minka Lavery 4068-660 is a versatile and stylish lighting fixture that can elevate the ambiance of any room. Its adjustable rod length allows for customization to suit different ceiling heights and lighting needs. The fixture's multiple small loops and hook provide various options for hanging, enabling you to create a unique and personalized lighting arrangement. The included bulb ensures immediate functionality, while the ground wire and mounting strap ensure safe and secure installation.

INSTALLATION INSTRUCTION FOR FIXTURE #4065-660
MOUNTING THE FIXTURE (FIG. 1)
1. Shut off the power supply at the fuse box or circuit
breaker. If necessary, r
emove the old fixture from wall.
Including the mounting hardware.
2. Carefully remove the new fixture from the carton and
check that all parts are included as shown in the
illustration.
3. Determine the rod length if necessary, then lace the
fixture wires through the rods (K) & (I) ,small loop (D)
and canopy (F) in order. After that, assemble the rods
(I) & (K) together, then assemble the small loop (D)
onto the top end of rod (I), after that, assemble the
bottom end of the rod (K) into the coupling (J) tightly.
4. Connect both small loops (D) together using the hook
(H).
5. Attach the mounting bar (C) to the o
utlet box using the
outlet box screws (B). The side of the mounting plate
marked GND must face out.
6. Follow the wiring instructions carefully (See Fig.2).
7. Attach the fixture canopy (F) over the mounting bar
(C) by protruding the nipple (A) through the mounting
holes on the canopy (F) and securing with ball nut (G)
tightly.
8. Install the bulb (L) (included) onto the socket (E) in
accordance with fixtures specifications.
(DO NOT
EXCEED THE MAXIMUM WATTAGE
RATING!) (NE PAS DEPASSER LA
PUISSANCE NOMINALE MAXIMALE!).
CONNECTING THE WIRES (FIG. 2)
1. At this point, connect the electrical wires as shown
in Fig. 2, making sure that all wire connectors are
secured. If your outlet box has a ground wire (green
or bare copper), connect the fixture’s ground wire to it.
Ot
herwise, connect the fixture’s ground wire directly to
the mounting strap using the green screw provided.
2. Tuck the wire connections neatly into the wall outlet
box.
Your installation is now complete. Return power to the
junction box and test the fixture.
Fig.2
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Set A#A-010
-Crossbar
-Ground Screw
-Mounting screws (2)
ROD#W30-1-11A * 3PCS
ROD#W30-H-11A*1PC
Fig.1
CANDLE SLEEVE
#CCV21140P-11A
CANDLE SLEEVE
#CCV21140P-11A
CANDLE SLEEVE
#CCV
21191P-11A
  • Page 1 1

Minka Lavery 4068-660 Installation guide

Type
Installation guide

Minka Lavery 4068-660 is a versatile and stylish lighting fixture that can elevate the ambiance of any room. Its adjustable rod length allows for customization to suit different ceiling heights and lighting needs. The fixture's multiple small loops and hook provide various options for hanging, enabling you to create a unique and personalized lighting arrangement. The included bulb ensures immediate functionality, while the ground wire and mounting strap ensure safe and secure installation.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI