Gibraltar Building Products TP10G-26 Operating instructions

Gibraltar Building Products
Brand
Gibraltar Building Products
Model
TP10G-26
Type
Operating instructions

This manual is also suitable for

TILE PAN #TP10G-26
INSTALLATION GUIDELINES
1. Roong underlayment should turned 6 in. up the wall.
2. The longer leg of the Tile Pan should extend approximately 3-1/2 in. up the wall.
3. Lengths of Tile Pan ashing should be overlapped a minimum of 8 inches
4. Tile Pan should be fastened to the sidewall approximately 12 in. on center. (The base should not be penetrated with fasteners)
5. The sidewall building paper, counter ashing and the siding should cover the sidewall leg of the Tile Pan a minimum of 2 inches
The intersection of a tile roof slope and a side wall is ashed with Counter Flashing and Tile Pan ashing.
Tile Pan is designed to extend under the tiles rather than being interwoven between courses.
Counter Flashing
Tile Pan
Underlayment
These installation guidelines are for use with typical or standard applications. It is always recommended to seek advice from a licensed professional, and to
check with your local building inspector or building permit office for approvals and possible variations that may apply.
CAUTION! Working above grade is inherently dangerous, be sure that proper fall protection measures are in place.
When working with power tools and sheet metal, gloves and eye protection are absolutely required.
  • Page 1 1

Gibraltar Building Products TP10G-26 Operating instructions

Gibraltar Building Products
Brand
Gibraltar Building Products
Model
TP10G-26
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents