1
Installation Instructions for
Penny 1 Light Floor Lamp
1.0
ET1071
Portable
ET1071
GP I :ENERAL RODUCT NFORMATION
This product is safety listed for dry locations only.
This instruction shows a typical installation.
1
2
1A
Install the harp by inserting it into the yoke.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Install the shade by placing the shade over the harp nipple and screwing the finial onto the nipple to secure it in place.
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider
than the other) as a safety feature to reduce the risk of
electric shock.This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit contact a qualified electrician.
Never use with an extension cord unless plug can be fully
inserted. Do not attempt to defeat this safety feature.
3
HARP
1
SHADE
LAMP
YOKE
SOCKET
3
FINIAL
HARP NIPPLE
2
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 160077IL
800.969.3347
www.generationlighting.com
© 2019 Generation Lighting.All rights reserved.
The "Generation Lighting" graphic is a registered trademark of
Generation Lighting. Generation Lighting reserves the right to
change specifications for product improvements without notification.
-
1
-
2
Generation Lighting ET1071 Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
4MODERNHOME T16 Installation guide
-
Maxax T17 User manual
-
Kenroy Home 31207 Installation guide
-
-
-
-
-
-
George Kovacs P794-613 User manual
-
