VERTICAL MODELS
HORIZONTAL MODELS
1. Shut the well pump off and relieve water pressure.
2. Make connections as shown using pipe sealing tape or paste.
3. Install a threaded plug into any unused connections.
4. Turn well pump on, pressurize system and check for leaks.
INSTALLATION
42S
42T
80
120
12HD
30HD
Outlet to
System
Pressure Switch
or Gauge
Air Volume
Control
Inlet from
Well Pump
Outlet to
System
Air Volume
Control
Inlet from
Well Pump
From Well
Pump
-
1
Water Worker ERTG82-A User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI