Panasonic DMCGX8SG Operating instructions

Brand: Panasonic

Model: DMCGX8SG

Type: Operating instructions

Basic Operating Instructions

Digital Camera/

Double Zoom Lens Kit

Model No.

DMC-GX8

Please read these instructions carefully before using this product, and

save this manual for future use.

More detailed instructions on the operation of this camera are

contained in “Operating Instructions for advanced features (PDF

format)” in the supplied DVD.

SQT1122

F0815YD0

until

2015/9/2

DMC-GX8WC_SG-SQT1122_eng.book 1 ページ２０１５年８月２１日　金曜日　午前８時２９分

SQT1122 (ENG)

Dear Customer,

We would like to take this opportunity to thank you for purchasing this Panasonic Digital

Camera. Please read these Operating Instructions carefully and keep them handy for

future reference. Please note that the actual controls and components, menu items, etc. of

your Digital Camera may look somewhat different from those shown in the illustrations in

these Operating Instructions.

Carefully observe copyright laws.

•

Recording of pre-recorded tapes or discs or other published or broadcast material for purposes

other than your own private use may infringe copyright laws. Even for the purpose of private

use, recording of certain material may be restricted.

Information for Your Safety

∫ Product identification marking

WARNING:

To reduce the risk of fire, electric shock or product damage,

•

Do not expose this unit to rain, moisture, dripping or splashing.

• Use only the recommended accessories.

• Do not remove covers.

• Do not repair this unit by yourself. Refer servicing to qualified service personnel.

The socket outlet shall be installed near the equipment and shall be easily accessible.

Product Location

Digital Camera Bottom

Battery charger Bottom

DMC-GX8WC_SG-SQT1122_eng.book 2 ページ２０１５年８月２１日　金曜日　午前８時２９分

(ENG) SQT1122

∫ About the battery pack

• Do not heat or expose to flame.

• Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with

doors and windows closed.

∫ About the battery charger

•

The battery charger is in the standby condition when the AC power supply cord is connected.

The primary circuit is always “live” as long as the power cord is connected to an electrical

outlet.

CAUTION

•

Danger of explosion if battery is incorrectly replaced. Replace only with the type

recommended by the manufacturer.

• When disposing of the batteries, please contact your local authorities or dealer and ask for

the correct method of disposal.

Warning

Risk of fire, explosion and burns. Do not disassemble, heat above 60 xC or incinerate.

CAUTION!

To reduce the risk of fire, electric shock or product damage,

•

Do not install or place this unit in a bookcase, built-in cabinet or in another confined

space. Ensure this unit is well ventilated.

DMC-GX8WC_SG-SQT1122_eng.book 3 ページ２０１５年８月２１日　金曜日　午前８時２９分

SQT1122 (ENG)

• Do not use any other USB connection cables except the supplied one or a genuine Panasonic

USB connection cable (DMW-USBC1: optional).

• Use a “High Speed HDMI micro cable” with the HDMI logo.

Cables that do not comply with the HDMI standards will not work.

“High Speed HDMI micro cable” (Type D–Type A plug, up to 2 m long)

• Always use a genuine Panasonic AV cable (DMW-AVC1: optional).

• Always use a genuine Panasonic shutter remote control (DMW-RSL1: optional).

Keep this unit as far away as possible from electromagnetic equipment (such as

microwave ovens, TVs, video games etc.).

•

If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be

disrupted by electromagnetic wave radiation.

• Do not use this unit near cell phones because doing so may result in noise adversely affecting

the pictures and/or sound.

• Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields

created by speakers or large motors.

• Electromagnetic wave radiation may adversely affect this unit, disturbing the pictures and/or

sound.

• If this unit is adversely affected by electromagnetic equipment and stops functioning properly,

turn this unit off and remove the battery or disconnect AC adaptor (DMW-AC10: optional). Then

reinsert the battery or reconnect AC adaptor and turn this unit on.

Do not use this unit near radio transmitters or high-voltage lines.

•

If you record near radio transmitters or high-voltage lines, the recorded pictures and/or sound

may be adversely affected.

Cautions for Use

DMC-GX8WC_SG-SQT1122_eng.book 4 ページ２０１５年８月２１日　金曜日　午前８時２９分

(ENG) SQT1122

• Before cleaning the camera, remove the battery or the DC coupler (DMW-DCC8:

optional), or disconnect the power plug from the outlet.

• Do not press the monitor with excessive force.

• Do not press the lens with excessive force.

• Do not spray the camera with insecticides or volatile chemicals.

•

Do not keep rubber or plastic products in contact with the camera for a long period of time.

• Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean

the camera, since it may deteriorate the external case or the coating may peel off.

• Do not leave the camera with the lens facing the sun, as rays of light from the sun may

cause it to malfunction.

• Always use the supplied cords and cables.

• Do not extend the cords or the cables.

• During access (image writing, reading and deleting, formatting etc.), do not turn this unit

off, remove the battery, card or disconnect the AC adaptor (DMW-AC10: optional).

Furthermore, do not subject the camera to vibration, impact or static electricity.

• The data on the card may be damaged or lost due to electromagnetic waves, static electricity or

breakdown of the camera or the card. We recommend storing important data on a PC etc.

• Do not format the card on your PC or other equipment. Format it on the camera only to ensure

proper operation.

• The battery is not charged when the camera is shipped. Charge the battery before use.

• The battery is a rechargeable lithium ion battery. If the temperature is too high or too

low, the operating time of the battery will become shorter.

• The battery becomes warm after using and during and after charging. The camera also

becomes warm during use. This is not a malfunction.

• Do not leave any metal items (such as clips) near the contact areas of the power plug or

near the batteries.

• Store the battery in a cool and dry place with a relatively stable temperature: [Recommended

temperature: 15 oC to 25 oC, Recommended humidity: 40%RH to 60%RH]

• Do not store the battery for a long time while fully charged. When storing the battery for a

long period of time, we recommend charging it once a year. Remove the battery from the

camera and store it again after it has completely discharged.

DMC-GX8WC_SG-SQT1122_eng.book 5 ページ２０１５年８月２１日　金曜日　午前８時２９分

SQT1122 (ENG)

Contents

Information for Your Safety .................2

• Cautions for Use ..............................4

Preparation/Basic

Care of the camera ...............................8

Standard Accessories ..........................9

Names and Functions of

Components........................................10

Preparation..........................................14

• Attaching the Shoulder Strap .........14

• Charging the Battery......................15

• Inserting/Removing the Battery......16

• Inserting/Removing the Card

(Optional).......................................16

• Formatting the card

(initialisation)..................................17

• Attaching/Removing the Lens ........18

• Opening the Monitor ......................18

• Setting Date/Time (Clock Set) .......19

Basic Operations ................................20

• Using the Viewfinder ......................20

• Shutter button (Taking pictures).....21

• Motion picture button

(Recording motion pictures) ..........21

• Mode dial

(Selecting a Recording Mode) .......22

• Cursor buttons/

[MENU/SET] button .......................22

• Front Dial/Rear Dial .......................23

• [LVF] button (Switching the

Monitor/Viewfinder)........................24

• Touch screen (Touch operations)...24

Setting menu items ............................25

Calling frequently-used menus

instantly (Quick Menu) .......................26

Assigning frequently used

functions to the buttons

(function buttons)...............................26

Recording

Taking Pictures using the Automatic

Function (Intelligent Auto Mode)...... 27

• Recording night scenes

([iHandheld Night Shot])................ 27

• Combining pictures into a single

picture with rich gradation

([iHDR]) ......................................... 28

• Taking a picture with a blurred

background (Defocus Control) ...... 28

• Recording images by changing

the brightness (Exposure) or

colour tone .................................... 28

Recording motion pictures with

manually set aperture value/

shutter speed

(Creative Video Mode) ....................... 29

Setting the Picture Quality

and Size .............................................. 30

• Setting the aspect ratio of

pictures ......................................... 30

• Setting the number of pixels ......... 30

• Setting the compression rate of

pictures ([Quality])......................... 31

Adjusting Focus Manually ................ 32

Select a Drive Mode ........................... 33

Recording 4K Photos ........................ 34

• Selecting pictures from

4K burst file and saving................. 35

Image Stabiliser.................................. 36

Recording Motion Picture ................. 38

• Recording motion pictures in 4K ... 40

DMC-GX8WC_SG-SQT1122_eng.book 6 ページ２０１５年８月２１日　金曜日　午前８時２９分

(ENG) SQT1122

Playback

Playing Back Pictures........................ 41

Playing Back Motion Pictures........... 41

Deleting Pictures................................ 42

Using the [Playback] Menu ............... 43

• [RAW Processing] ......................... 43

Wi-Fi/NFC

What you can do with the Wi-Fi

function ............................................... 45

Controlling with a Smartphone/

Tablet................................................... 45

• Installing the smartphone/

tablet app “Image App” ................. 45

Connecting to a smartphone/

tablet.................................................... 46

• Taking images via a smartphone/

tablet (remote recording)............... 48

• Playing back images

in the camera ................................ 48

• Saving images stored

in the camera ................................ 49

• Sending images in the camera

to an SNS...................................... 49

• Adding location information

to images stored in the camera

from a smartphone/tablet .............. 50

• Combining motion pictures

recorded with Snap Movie

according to your preference

on a smartphone/tablet ................. 50

Others

About the supplied software .............51

Monitor Display/

Viewfinder Display..............................52

Menu list ..............................................56

Troubleshooting .................................58

Specifications .....................................64

Digital Camera Accessory System ...69

Reading the Operating Instructions

(PDF format)........................................70

DMC-GX8WC_SG-SQT1122_eng.book 7 ページ２０１５年８月２１日　金曜日　午前８時２９分

Preparation/Basic

SQT1122 (ENG)

Care of the camera

To avoid damaging your camera and to experience the maximum enjoyment you

should exercise the following precautions.

•

The lens, monitor and the camera body can sustain damage if the camera body is dropped or

subjected to excessive temperature, moisture, water or dust.

• The monitor can be damaged if excessive pressure is applied to the screen surface, during

actual use or while cleaning.

∫ Splash Proof

Splash Proof is a term used to describe an extra level of protection this camera offers against

exposure to a minimal amount of moisture, water or dust. Splash Proof does not guarantee that

damage will not occur if this camera is subjected to direct contact with water.

In order to minimise the possibility of damage please be sure the following precautions are taken:

– The Splash Proof feature works in conjunction with the H-HS12035 and H-HS35100 lenses

that were specifically designed to support this feature.

– Make sure that all doors are securely closed.

– Make sure that you are in a dry and secure place when changing the battery, lens or memory

card. After changing, make sure their protective doors are securely closed.

–

If this camera is exposed to water, sand or any other foreign material clean it as soon as possible,

taking the necessary precautions that the foreign substance does not get inside the camera.

– Under no circumstances should you touch or place any foreign objects within the camera or

in close proximity of the camera’s image sensor.

If sand, dust, or liquids such as water droplets adhere to the monitor, wipe them off with a dry soft cloth.

– Not doing so may cause the monitor to respond incorrectly to touch operations.

– If the monitor is closed when such liquids are present, malfunction may result.

∫ Condensation

•

Condensation may occur on the lens, monitor or in the viewfinder when the room temperature

or humidity changes rapidly. This may cause the image to temporarily become hazy. If this

occurs, turn the camera off and allow the camera to sit in a temperature stable environment for

several minutes. It will clear by itself.

• If you know that you will be moving between areas where there will be a large change in

temperature or humidity, you can help prevent condensation forming on the camera by placing

the camera in a large plastic zipper bag, so condensation will form on the bag, not the camera.

Allow the temperature to stabilise before removing the camera from the bag.

For smoother recording, we recommend updating the firmware of the interchangeable lens

to the latest version.

•

To view the latest information on the firmware or to download the firmware, visit the

support site below:

http://panasonic.jp/support/global/cs/dsc/

(This Site is English only.)

• To check the firmware version of the interchangeable lens, attach it to the camera body and

select [Version Disp.] in the [Setup] menu.

About the firmware of your interchangeable lens

DMC-GX8WC_SG-SQT1122_eng.book 8 ページ２０１５年８月２１日　金曜日　午前８時２９分

Preparation/Basic

(ENG) SQT1122

Standard Accessories

Check that all the accessories are supplied before using the camera.

Product numbers correct as of July 2015. These may be subject to change.

Digital Camera Body

(This is referred to as camera body in these operating instructions.)

¢1 This is referred to as lens in these operating

instructions.

¢2 This is attached to the interchangeable lens at

the time of purchase.

¢3 This is attached to the camera body at the time

of purchase.

¢4 The interchangeable lenses (H-FS1442A/

H-FS45150) included in DMC-GX8WC are not dust- and splash-proof.

• SD Memory Card, SDHC Memory Card and SDXC Memory Card are indicated as card in the

text.

• The card is optional.

• Description in these operating instructions is based on the interchangeable lens (H-FS1442A).

• Consult the dealer or Panasonic if you lose the supplied accessories. (You can purchase the

accessories separately.)

1 Interchangeable Lens

¢1,4

2 Lens Hood

3 Lens Cap

¢2

4 Lens Rear Cap

¢2

5 Body Cap

¢3

Battery Pack

(Indicated as

battery pack

battery

in the text)

Charge the battery before use.

Battery Charger

(Indicated as

battery charger

charger

in the text)

8 AC Cable

9 USB Connection Cable

DVD

• Software:

Use it to install the software to your PC.

• Operating Instructions for advanced features

Leather Body Case/

Shoulder Strap

Hot shoe cover

¢3

A:Black

B: Silver

13 Eyecup

¢3

DMC-GX8WC

H-FS1442A

H-FS45150

VYC1113

VYC1090

VYF3510

VYF3201

VFC4605VFC4605

K2CA2YY00247

657

SFM0084

K1HY08YY0031

DMW-BLC12E

VKF4971 DE-A80D

12 13

SYQ0503

:

SYQ0510

:

SYQ0511

SFC0359

DMC-GX8WC_SG-SQT1122_eng.book 9 ページ２０１５年８月２１日　金曜日　午前８時２９分

Preparation/Basic

SQT1122 (ENG)

Names and Functions of Components

∫ Camera body

22 2125 24

1514

319

2023

1211 13

Status indicator (P19)/

Wi-Fi

connection lamp

• The lamp lights green when the camera is

turned on, and lights blue when it is

connected to Wi-Fi.

Camera ON/OFF switch (P19)

[Fn] button (Fn1) (P26)

Motion picture button (P38)

Function button (Fn13) (P26)

Rear dial (P23)

Shutter button (P21)

Front dial (P23)

Self-timer indicator/

AF Assist Lamp

Function button (Fn7) (P26)

Exposure compensation dial (P28)

Mode dial (P22)

• Rotate the mode dial to switch the Recording

Mode.

Hot shoe (Hot shoe cover) (P14)

• Keep the Hot Shoe Cover out of reach of

children to prevent swallowing.

Stereo microphone

• Be careful not to cover the microphone with

your finger. Doing so may make sound

difficult to record.

Focus distance reference mark

[REMOTE/MIC] socket

• An external microphone (optional) can

record higher quality audio than the built-in

microphone.

[AV OUT/DIGITAL] socket

[HDMI] socket

Shoulder strap eyelet (P14)

Speaker

• Be careful not to cover the speaker with your

finger. Doing so may make sound difficult to

hear.

Lens release button (P18)

Lens lock pin

Mount

Sensor

Lens fitting mark (P18)

DMC-GX8WC_SG-SQT1122_eng.book 10 ページ２０１５年８月２１日　金曜日　午前８時２９分

Preparation/Basic

(ENG) SQT1122

46 4344

27 28

31 32

Touch screen (P24)/monitor (P52)

Viewfinder (P24)

Eyecup

• Keep the Eyecup out of reach of children to

prevent swallowing.

Eye sensor (P24)

[Q.MENU] button (P26)/

Function button (Fn2) (P26)

[(] (Playback) button (P41)

[DISP.] button

• Each time this is pressed, the display on the

monitor is switched.

Diopter adjustment dial (P20)

[LVF] button (P24)/

Function button (Fn6) (P26)

[Fn] button (Fn5) (P26)

Focus mode lever (P32)

[AF/AE LOCK] button

Cursor buttons (P22)

3/[ ] (ISO sensitivity)

1/[ ] (White Balance)

2/[ ] (Auto Focus Mode)

4/[ ] (Drive mode) (P33)

– Single (P33)/Burst/4K Photo (P34)/

Auto bracket/Self-timer

[MENU/SET] button (P25)

NFC antenna [ ] (P47, 49)

[Fn] button (Fn4) (P26)

[ ] (Delete/Cancel) button (P42)/

Function button (Fn3) (P26)

DC coupler cover

• When using an AC adaptor, ensure that the

Panasonic DC coupler (DMW-DCC8:

optional) and AC adaptor (DMW-AC10:

optional) are used.

• Always use a genuine Panasonic AC

adaptor (DMW-AC10: optional).

• When using an AC adaptor, use the AC

cable supplied with the AC adaptor.

Release lever (P16)

Card/Battery door (P16)

Tripod mount

• It may not be possible to attach and securely

fasten a tripod with a screw length of 5.5 mm

or more to the camera. Doing so may also

damage the camera.

DMC-GX8WC_SG-SQT1122_eng.book 11 ページ２０１５年８月２１日　金曜日　午前８時２９分

Preparation/Basic

SQT1122 (ENG)

∫ Lens

∫ Attaching the Lens Hood

To attach the lens hood (flower shape) that came with the interchangeable lens

(H-FS1442A)

Hold the lens hood by placing your fingers as shown

in the figure.

•

Do not hold the lens hood in such a way that it will be bent.

1 Align the mark A ( ) on the lens hood with the mark on the tip of the lens.

2 Rotate the lens hood in the direction of the arrow until it clicks and then align

the mark B ( ) on the lens hood with the mark on the tip of the lens.

To attach the lens hood that came with the interchangeable lens (H-FS45150)

1 Align the mark A ( ) on the lens hood with the mark on the tip of the lens.

2 Rotate the lens hood in the direction of the arrow until it clicks and then align

the mark B ( ) on the lens hood with the mark on the tip of the lens.

H-FS1442A H-FS45150

1 Lens surface

2Tele

3 Focus ring (P32)

4 Zoom ring

5Wide

6 Contact point

7 Lens fitting mark (P18)

34 6 7152

DMC-GX8WC_SG-SQT1122_eng.book 12 ページ２０１５年８月２１日　金曜日　午前８時２９分

Preparation/Basic

(ENG) SQT1122

Temporarily Storing the Lens Hood

1 Turn the lens hood in the direction of the arrow to detach it.

2 Align the mark C ( ) on the lens hood with the mark on the tip of the lens.

3 Turn the lens hood in the direction of the arrow until it clicks into place.

∫ Attaching the Leather Body Case

Place the camera with its lens portion facing forward, and tighten the screw on the bottom.

• To take out the camera from the Leather Body Case, after loosening the screw on the bottom,

pull out the camera while holding it firmly and taking care not to drop it.

Notes on the use of the Leather Body Case and Shoulder Strap

•

When attaching a monopod or tripod, do not hold the camera and overtighten the

monopod or tripod screw.

– When you use a monopod or tripod with a ball head mount (a type that requires you to rotate

the whole tripod head when attaching the camera), we recommend that you take out the

camera from the Leather Body Case before attaching it to the monopod or tripod.

• The NFC function is not available when the Leather Body Case is attached.

• The Leather Body Case is designed to give protection while carrying around, and it does not

guarantee protection from damage caused by dropping it or impact.

• When storing the camera for a long period of time, take it out from the Leather Body Case.

• The Leather Body Case and Shoulder Strap are not waterproof.

Be careful not to wet them in adverse conditions such as rain.

• Do not leave the Leather Body Case and Shoulder Strap in a car exposed to direct sunlight or

in a hot and humid location, such as a bathroom.

• If the Leather Body Case or Shoulder Strap gets wet, after wiping the moisture off the wet

portion with a dry cloth (hand towel, etc.) and stretching the case or strap back to its proper

shape, let it dry thoroughly in the shade.

• To clean the Leather Body Case and Shoulder Strap, wipe them with a dry soft cloth.

– When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet

cloth, and then with a dry cloth.

– Do not use solvents such as benzine, thinner, alcohol or dishwashing liquid, as these may

damage the the Leather Body Case and Shoulder Strap.

– When using a chemical cloth, be sure to follow the accompanying instructions.

• Store the Leather Body Case and Shoulder Strap in a cool, dry, and well-ventilated location free

of dust and chemicals.

• Since leather is used in the Leather Body Case and Shoulder Strap, discolouration and

fading may occur.

DMC-GX8WC_SG-SQT1122_eng.book 13 ページ２０１５年８月２１日　金曜日　午前８時２９分

Preparation/Basic

SQT1122 (ENG)

∫ Removing the Hot Shoe Cover

The camera comes with a hot shoe cover attached to the hot shoe.

Remove the hot shoe cover by pulling it in the direction

indicated by arrow

while pressing it in the direction

indicated by arrow

•

When the hot shoe is not in use, make sure to attach the hot

shoe cover.

• Please be careful not to lose the hot shoe cover.

Preparation

• Check that the camera is turned off.

•

We recommend attaching the shoulder strap when using the camera to prevent it from dropping.

• Perform steps 1 to 8 and then attach the other side of the shoulder strap.

• Use the shoulder strap around your shoulder.

– Do not wrap the strap around your neck.

– It may result in injury or accident.

• Do not leave the shoulder strap where an infant can reach it.

– It may result in an accident by mistakenly wrapping around the neck.

Attaching the Shoulder Strap

DMC-GX8WC_SG-SQT1122_eng.book 14 ページ２０１５年８月２１日　金曜日　午前８時２９分

Preparation/Basic

(ENG) SQT1122

The battery that can be used with this unit is DMW-BLC12E or DMW-BLC12.

1 Attach the battery paying attention to the direction of the battery.

2 Connect the AC cable.

•

The [CHARGE] indicator A lights up and charging begins.

∫ About the [CHARGE] indicator

•

When the [CHARGE] indicator flashes

– The battery temperature is too high or too low. It is recommended to charge the battery again

in an ambient temperature of between 10 oC and 30 oC.

– The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.

∫ Charging time

•

The indicated charging time is for when the battery has been discharged completely.

The charging time may vary depending on how the battery has been used.

The charging time for the battery in hot/cold environments or a battery that has not been

used for a long time may be longer than normal.

Charging the Battery

On: Charging.

Off: Charging has completed.

(Disconnect the charger from the electrical socket and detach the

battery after charging is completed.)

Charging time Approx. 140 min

DMC-GX8WC_SG-SQT1122_eng.book 15 ページ２０１５年８月２１日　金曜日　午前８時２９分

Preparation/Basic

SQT1122 (ENG)

• Always use genuine Panasonic batteries (DMW-BLC12E or DMW-BLC12).

• If you use other batteries, we cannot guarantee the quality of this product.

• Being careful about the battery orientation, insert all the way until you hear a locking sound and

then check that it is locked by lever A.

Pull the lever A in the direction of the arrow to remove the battery.

• Push it securely all the way until you hear a “click” while being careful about the direction in

which you insert it.

To remove the card, push the card until it clicks, then pull the card out upright.

∫ About cards that can be used with this unit

Inserting/Removing the Battery

Inserting/Removing the Card (Optional)

SD Memory Card

(512 MB to 2 GB)

• SDHC Memory Cards and SDXC Memory Cards can be

used only with their compatible devices.

• Check that the PC and other equipment are compatible when

using the SDXC Memory Cards.

http://panasonic.net/avc/sdcard/information/SDXC.html

• This unit is compatible with UHS-I UHS Speed Class 3

standard SDHC/SDXC memory cards.

• Operation of the cards on the left has been confirmed with

Panasonic’s cards.

SDHC Memory Card

(4 GB to 32 GB)

SDXC Memory Card

(48 GB to 128 GB)

DMC-GX8WC_SG-SQT1122_eng.book 16 ページ２０１５年８月２１日　金曜日　午前８時２９分

Preparation/Basic

(ENG) SQT1122

∫ About motion picture/4K photo recording and speed class ratings

According to the [Rec Format] (P39) and [Rec Quality] (P39) of a motion picture, the

required card differs. To record 4K photos, you need a card with a speed class rating that

supports 4K photo recording. Use a card that meets the following ratings of the SD Speed

Class or UHS Speed Class.

•

SD Speed Class and UHS Speed Class are the speed standards regarding continuous writing.

To check the class, see the labelled side, etc. of the card.

• Please confirm the latest information on the following website.

http://panasonic.jp/support/global/cs/dsc/

(This Site is English only.)

• Keep the Memory Card out of reach of children to prevent swallowing.

Format the card before recording a picture with this unit.

Since data cannot be recovered after formatting, make sure to back up necessary

data in advance.

Select the menu. (P25)

•

Confirmation screen is displayed. It is executed when [Yes] is selected.

[Rec Format] [Rec Quality] Speed class Label example

[AVCHD] All

Class 4 or higher

[MP4] FHD/HD/VGA

[MP4] 4K UHS Speed Class 3

When recording 4K photos UHS Speed Class 3

Formatting the card (initialisation)

> [Setup] > [Format]

DMC-GX8WC_SG-SQT1122_eng.book 17 ページ２０１５年８月２１日　金曜日　午前８時２９分

Preparation/Basic

SQT1122 (ENG)

• Change lenses where there is not a lot of dirt or dust.

• Do not press the lens release button A when you attach a lens.

∫ Detaching the lens

1 Attach the lens cap.

2 While pressing on the lens release button B, rotate

the lens toward the arrow until it stops and then

remove.

At the time when this camera is purchased, the monitor is stowed in the camera body.

Bring out the monitor as shown below.

1 Open the monitor. (Maximum 180o)

2 It can be rotated 180o forward.

3 Return the monitor to its original position.

•

Only rotate the monitor after opening it wide enough, and be careful not to use

excessive force as it may be damaged.

• When not using the monitor it is recommended that you close it with the screen facing inward to

prevent dirt and scratches.

Attaching/Removing the Lens

Opening the Monitor

DMC-GX8WC_SG-SQT1122_eng.book 18 ページ２０１５年８月２１日　金曜日　午前８時２９分

Preparation/Basic

(ENG) SQT1122

• The clock is not set when the camera is shipped.

1 Turn the camera on.

•

When the camera is turned on, the status indicator 1

lights up green.

2 Press [MENU/SET].

3 Press 3/4 to select the language, and press [MENU/

SET].

4 Press [MENU/SET].

5 Press 2/1 to select the items (year, month, day, hour,

minute), and press 3/4 to set.

6 Press [MENU/SET] to set.

7 When [The clock setting has been completed.] is displayed, press [MENU/SET].

8 When [Please set the home area] is displayed, press [MENU/SET].

9 Press 2/1 to select the home area, and then press

[MENU/SET].

Setting Date/Time (Clock Set)

DMC-GX8WC_SG-SQT1122_eng.book 19 ページ２０１５年８月２１日　金曜日　午前８時２９分

Preparation/Basic

SQT1122 (ENG)

Basic Operations

You can record images from a variety of angles by adjusting the angle of the viewfinder.

•

Be careful not to catch your finger, etc. in the viewfinder.

• When adjusting the angle of the viewfinder, be careful not to apply too much force, as

this may cause malfunction.

• Return the viewfinder to its original position completely when the camera is not in use.

• When the viewfinder surface becomes dirty, remove the Eyecup, blow away the dust with a

blower (commercially available), and wipe the surface lightly with a dry, soft cloth.

• Use of an external flash (optional) will limit the maximum angle to which the viewfinder can be

adjusted.

Adjust the diopter to suit your vision so that

you can see the characters displayed in the

viewfinder clearly.

Using the Viewfinder

Adjusting the angle of the viewfinder

Taking pictures at a low angle

Diopter adjustment

DMC-GX8WC_SG-SQT1122_eng.book 20 ページ２０１５年８月２１日　金曜日　午前８時２９分

Page is loading ...

Panasonic DMCGX8SG Operating instructions

Panasonic DMCGX8SG Operating instructions

Panasonic DMCGX8SG Operating instructions

Related papers

Other documents