Panasonic HCV10EP Operating instructions

Category
Camcorders
Type
Operating instructions
Operating Instructions
Digital Video Camera
Model No. HC-V10
Before use, please read these instructions completely.
until
2012/2/10
VQT4C56
- 2 -
About the recording format for
recording motion pictures
The unit is an MP4 format (MPEG-4 AVC
file standard) camera for recording high-
definition motion pictures.
AVCHD and MPEG2 motion pictures are
different formats, and are not therefore
supported by the unit.
Indemnity about recorded
content
Panasonic does not accept any
responsibility for damages directly or
indirectly due to any type of problems that
result in loss of recording or edited content,
and does not guarantee any content if
recording or editing does not work properly.
Likewise, the above also applies in a case
where any type of repair is made to the unit.
About Condensation (When
the lens or the LCD monitor is
fogged up)
Condensation occurs when the ambient
temperature or humidity changes. Be careful
of condensation since it causes lens or LCD
monitor stains, fungus and camera
malfunction.
For more details about the cause and
action required for condensation, refer to
page 86.
Cards that you can use with
this unit
SD Memory Card, SDHC Memory Card
and SDXC Memory Card
4 GB or more Memory Cards that do not
have the SDHC logo or 48 GB or more
Memory Cards that do not have the SDXC
logo are not based on SD Memory Card
Specifications.
Refer to page 13 for more details on SD
cards.
Information for Your Safety
- 3 -
For the purposes of these
operating instructions
SD Memory Card, SDHC Memory Card
and SDXC Memory Card are referred to
as the “SD card”.
Functions that can be used for motion
picture recording/motion picture playback
are indicated by in these
operating instructions.
Functions that can be used for still picture
recording/still picture playback are
indicated by in these operating
instructions.
Pages for reference are indicated by an
arrow, for example: l 00
- 4 -
Information for Your Safety......................2
Preparation
Names and Functions of Main Parts ....... 6
Power supply.............................................9
Inserting/removing the battery............. 9
Charging the battery ......................... 10
Charging and recording time............. 12
Recording to a card ................................ 13
Cards that you can use with
this unit.............................................. 13
Inserting/removing an SD card.......... 14
Turning the unit on/off............................15
Selecting a mode .................................... 16
Setting date and time.............................. 17
Basic
Before recording ..................................... 18
Recording motion pictures .................... 19
Recording still pictures .......................... 21
Intelligent Auto Mode ............................. 22
Motion picture/Still picture
playback ..................................................24
Using the menu screen .......................... 27
Using the Setup Menu ............................ 28
Advanced (Recording)
Using the Zoom.......................................33
Optical image stabilizer function...........34
Recording functions of operation
icons ........................................................ 35
Operation icons ................................. 35
Recording functions of menus ..............39
Manual recording ....................................44
White Balance ................................... 44
Manual shutter speed/
iris adjustment ................................... 46
Recording with Manual Focus........... 47
Advanced (Playback)
Playback Operations .............................. 48
Motion picture playback using
operation icon ................................... 48
Creating still picture from motion
picture ............................................... 49
Repeat playback ............................... 49
Resuming the previous playback...... 50
Zooming in on a still picture during
playback (Playback zoom) ................ 50
Various playback functions ................... 51
Playing back motion pictures/
still pictures by date .......................... 51
Changing the playback settings and
playing back the slide show .............. 52
Deleting scenes/still pictures ................ 53
Dividing a scene to partially
delete ................................................ 55
Protecting scenes/still pictures ......... 56
Watching Video/Pictures on
your TV .................................................... 57
Connecting with a HDMI
mini cable.......................................... 59
Playback using VIERA Link ................... 60
Copy/Dubbing
Dubbing images onto
other video devices ................................ 62
Contents
- 5 -
With a PC
What you can do with a PC .................... 63
End User License Agreement ........... 65
Operating environment .......................... 67
Installation ............................................... 70
Connecting to a PC................................. 71
About the PC display ........................ 73
Starting HD Writer HE 1.0 .......................74
Reading the operating instructions
of the software applications............... 74
If using Mac ............................................. 75
Others
Indications ............................................... 76
Messages.................................................78
About recovery.................................. 78
Troubleshooting......................................79
Cautions for use...................................... 83
About copyright ...................................... 87
Recording modes/approximate
recordable time ....................................... 88
Approximate number of recordable
pictures .................................................... 89
- 6 -
1 LCD monitor
It can open up to 90o.
It can rotate up to 180o A towards the lens
or 90o B towards the opposite direction.
2 Intelligent auto/Manual button
[iA/MANUAL] (l 22, 44)
3 Optical image stabilizer button
[ O.I.S.] (l 34)
4 Power button [ ] (l 15)
5 Delete button [ ] (l 53)
6 Audio-video output terminal [A/V]
(l 57, 62)
Use the AV cable (only the supplied
cable).
7 USB terminal [ ] (l 10, 71)
8 Access lamp [ACCESS] (l 14)
9 SD card slot (l 14)
10 SD card cover [SD CARD] (l 14)
Preparation
Names and Functions of Main Parts
1 23
45 678
10
9
Due to limitations in LCD production
technology, there may be some tiny bright
or dark spots on the LCD monitor screen.
However, this is not a malfunction and
does not affect the recorded picture.

- 7 -
11 Lens cover
12 Lens
13 Lens cover opening/closing switch
When not using the unit, close the lens
cover to protect the lens.
Slide the opening/closing switch to
open/close the cover.
14 Internal stereo microphones
15 Menu button [MENU] (l 27)
16 Status indicator (l 15)
17 Mode switch (l 16)
18 Recording start/stop button (l 19)
19 Cursor button (l 24, 27, 35)
Use the cursor button to select the
recording functions and playback
operations, and to operate the menu
screen.
In these operating instructions, the cursor
button is denoted as shown below or as
3/4/2/1.
Example: For pressing the (down) button
20 Enter button [ENTER] (l 24, 27, 35)
21 Battery holder (l 9)
12
13
14
11
1715
18
212019
16
or Press 4
- 8 -
22 Battery release lever [BATTERY]
(l 9)
23 Tripod receptacle
If you attach a tripod which has a 5.5 mm
screw or larger, it may damage this unit.
24 Photoshot button [ ] (l 21)
25 Zoom lever [W/T] (In Recording
Mode) (l 33)
Thumbnail display switch [ / ]/
Volume lever [sVOLr] (In Playback
Mode) (l 25)
26 Speaker
27 Grip belt
Adjust the length of the grip belt so that it fits
your hand.
1 Flip the belt.
2 Adjust the length.
3 Replace the belt.
28 HDMI mini connector (l 57, 60)
22 23
2524
27
26
28
- 9 -
About batteries that you can use with this unit
The battery that can be used with this unit is VW-VBL090/VW-VBK180/VW-VBK360.
Inserting/removing the battery
Press the power button to turn off the unit. (l 15)
Install the battery by inserting it in the direction shown in the figure.
Preparation
Power supply
It has been found that counterfeit battery packs which look very similar to the
genuine product are made available to purchase in some markets. Some of these
battery packs are not adequately protected with internal protection to meet the
requirements of appropriate safety standards. There is a possibility that these
battery packs may lead to fire or explosion. Please be advised that we are not liable
for any accident or failure occurring as a result of use of a counterfeit battery pack.
To ensure that safe products are used we would recommend that a genuine
Panasonic battery pack is used.
Removing the battery
Be sure to hold down the power button until
the status indicator goes off. Then remove
the battery while supporting the unit to
prevent it from dropping.
Move the battery release lever in the
direction indicated by the arrow and
remove the battery when unlocked.
BATTERY
Insert the battery until it clicks and
locks.
- 10 -
Charging the battery
Charging with an AC adaptor.
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is
always “live” as long as the AC adaptor is connected to an electrical outlet.
Important:
Be sure to use the supplied AC adaptor and USB cable. Do not use parts supplied
with other equipment.
The AC adaptor and USB cable are for use with this unit only. Do not use them with
other equipment. Similarly, do not use AC adaptors and USB cables from other
equipment with this unit.
The battery cannot be charged when the unit is turned on. Press the power button to
turn off the unit. (l 15)
It is recommended to charge the battery in a temperature between 10 oC and 30 oC.
(The battery temperature should also be the same.)
A USB terminal
B To the AC outlet
Insert the plugs as far as they will go.
1 Open the LCD monitor.
2 Connect the USB cable to the AC adaptor.
Check that the plug portion of the AC adaptor is not loose or misaligned.
Do not use any other AC adaptors except the supplied one.
Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
3 Plug the AC adaptor into the AC outlet.
4 Connect the USB cable to the unit.
The status indicator
C
will flash red
with approx. 2 seconds period (off for approx. 1 second, on for
approx. 1 second),
indicating that charging has begun.
It will turn off when the charging is completed.
When this unit is purchased, the battery is not charged. Charge the battery fully
before using this unit for the first time.
- 11 -
Connecting to the AC outlet
If you turn on the unit while connecting with the AC adaptor, you can use the unit with power
supplied from the outlet.
When recording for a long time, keep the AC adaptor connected and use it together with the battery.
Connecting to a PC and charging.
Charge the unit if you do not have the AC adaptor handy.
A USB cable (supplied)
Insert the plugs as far as they will go.
Press the power button and turn the unit off. (l 15)
1 Turn the power of the PC on.
2 Connect the USB cable
The status indicator
B
will flash red
with approx. 2 seconds period (off for approx. 1 second, on for
approx. 1 second),
indicating that charging has begun.
It will turn off when the charging is completed.
Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
Always connect directly to a PC.
You cannot charge when the status indicator flashes rapidly, or when it does not light at all.
Charge using the AC adaptor. (l 10)
It will take 2 or 3 times longer to charge compared to when using the AC adaptor.
If the status indicator flashes at a particularly fast or slow rate, refer to page 85.
If you do not intend to use the unit for an extended period, disconnect the USB cable from
the unit for safety.
Charging may not be possible depending on the operating environment of the PC being
used (such as custom-made PC).
Charging will stop when turning the power of the PC off or forcing it into sleep mode. Charging
will start again when turning the power of the PC on again, or waking from sleep mode.
When connected to a PC, an error message may be displayed at the top of the PC screen.
For more details, refer to page 82.
The unit will be charged if it is connected to a Panasonic Blu-ray disc recorder or DVD
recorder with a USB cable, even if the unit is turned off.
We recommend using Panasonic batteries (l 12).
If you use other batteries, we cannot guarantee the quality of this product.
Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time
with doors and windows closed.
- 12 -
Charging and recording time
Charging/Recording time
Temperature: 25 oC/humidity: 60%RH
Time in the parenthesis is charging time when this unit is connected to a PC, Panasonic
Blu-ray disc recorder, or DVD recorder.
These times are approximations.
The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as
high/low temperature.
The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning the unit on/off, moving the zoom lever etc.
The batteries heat up after use or charging. This is not a malfunction.
Battery model number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
mode
Maximum
continuously
recordable
time
Actual
recordable
time
Supplied battery/
VW-VBL090 (optional)
[3.6 V/895 mAh]
2h10min
(3 h)
[1280k720/50p] 1 h 25 min 40 min
[iFrame]/
[640k480/50p]
1h40min 50min
VW-VBK180 (optional)
[3.6 V/1790 mAh]
2h50min
(5h20min)
[1280
k
720/50p]
3h10min 1h40min
[iFrame]/
[640
k
480/50p]
3h45min 1h55min
VW-VBK360 (optional)
[3.6 V/3580 mAh]
4h45min
(10 h)
[1280
k
720/50p]
6h30min 3h20min
[iFrame]/
[640
k
480/50p]
7h30min 3h55min
Battery capacity indication
The display changes as the battery capacity reduces.
####
When the charge runs out, flashes red.
- 13 -
Cards that you can use with this unit
Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for
motion picture recording.
* SD Speed Class Rating is the speed
standard regarding continuous writing.
Check via the label on the card, etc.
Please confirm the latest information about SD Memory Cards/SDHC Memory Cards/
SDXC Memory Cards that can be used for motion picture recording on the following
website.
http://panasonic.jp/support/global/cs/e_cam
(This website is in English only.)
Operation of the SD Card 256 MB or less is not guaranteed. Also, the SD Card 32 MB or
less cannot be used for the motion picture recording.
4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory
Cards that do not have the SDXC logo are not based on SD Memory Card Specifications.
The operation of Memory cards exceeding 64 GB cannot be guaranteed.
When the write-protect switch A on SD card is locked, no recording,
deletion or editing will be possible on the card.
Keep the memory card out of reach of children to prevent swallowing.
Preparation
Recording to a card
This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC
Memory Cards and SDXC Memory Cards. When using an SDHC Memory Card/SDXC
Memory Card with other equipment, check the equipment is compatible with these
Memory Cards.
Card type Capacity
SD Memory Card 512 MB/1 GB/2 GB
SDHC Memory Card 4GB/6GB/8GB/12GB/16GB/24GB/32GB
SDXC Memory Card 48 GB/64 GB
e.g.:
32
- 14 -
Inserting/removing an SD card
Caution:
Check that the access lamp has gone off.
1 Open the LCD monitor.
2 Open the SD card cover and
insert (remove) the SD card
into (from) the card slot B.
Face the label side C in the direction
shown in the illustration and press it
straight in as far as it will go.
Press the centre of the SD card and then
pull it straight out.
3 Securely close the SD card
cover.
Securely close it until it clicks.
Do not touch the terminals on the back of
the SD card.
Do not apply strong shocks, bend, or drop
the SD card.
Electrical noise, static electricity or the
failure of this unit or the SD card may
damage or erase the data stored on the
SD card.
When the card access lamp is lit, do not:
jRemove the SD card
jTurn the unit off
jInsert and remove the USB cable
jExpose the unit to vibrations or shock
Performing the above while the lamp is on
may result in damage to data/SD card or
this unit.
Do not expose the terminals of the SD
card to water, dirt or dust.
Do not place SD cards in the following areas:
jIn direct sunlight
jIn very dusty or humid areas
jNear a heater
jLocations susceptible to significant
difference in temperature (condensation
can occur.)
jWhere static electricity or
electromagnetic waves occur
To protect SD cards, return them to their
cases when you are not using them.
About disposing of or giving away the SD
card. (l 86)
When using an SD card not from Panasonic, or one previously used on other equipment,
for the first time on this unit, format the SD card. (l 32) When the SD card is formatted, all
of the recorded data is deleted. Once the data is deleted, it cannot be restored.
Access lamp [ACCESS] A
When this unit is accessing the SD
card, the access lamp lights up.
- 15 -
You can turn the unit on and off using the power button or by opening and closing the LCD
monitor.
Open the LCD monitor and press the power button to turn on the unit.
A The status indicator lights on.
Unit is turned on when the LCD monitor is opened, and unit is turned off when it is closed.
During normal use, opening and closing of the LCD monitor can be conveniently used
to turn the unit on/off.
To turn on the unit
A The status indicator lights on.
To turn off the unit
B The status indicator goes off.
The unit will not turn off while recording motion pictures even if the LCD monitor is closed.
In the following cases, opening the LCD monitor does not turn on the unit. Press the power
button to turn on the unit.
jWhen the unit is originally purchased
jWhen you have turned off the unit using the power button
Preparation
Turning the unit on/off
Turning the unit on and off with the power button
Turning the unit on and off with the LCD monitor
To turn off the unit
Hold down the power button until the status
indicator goes off.
- 16 -
Change the mode to recording or playback.
Operate the mode switch to change the mode to or .
Preparation
Selecting a mode
Recording Mode (l 19, 21)
Playback Mode (l 24, 48)
- 17 -
When the unit is turned on for the first time, a message asking you to set the date and time
will appear.
Select [YES] and perform
Step
s 2 to 3 below to set the date and time.
¬ Change the mode to .
1 Select the menu. (l 27)
2 Select the date or time using 2/1 and set the desired value using
3/4.
A Displaying the World time setting
(l 28):
[HOME]/ [DESTINATION]
The year can be set between 2000 and
2039.
The 24-hour system is used to display the
time.
3 Press the ENTER button.
A message prompting for World Time setting may be displayed. Perform the World Time
setting by pressing the ENTER button. (l 28)
Press the MENU button to complete the setting.
The date and time function is driven by a built-in lithium battery.
If the time display becomes [- -], the built-in lithium battery needs to be charged. To
recharge the built-in lithium battery, connect the AC adaptor or attach the battery to this
unit. Leave the unit as it is for approx. 24 hours and the battery will maintain the date and
time for approx. 4 months. (The battery is still being recharged even if the unit is off.)
Preparation
Setting date and time
: [SETUP] # [CLOCK SET]
- 18 -
Basic camera positioning
1 Hold the unit with both hands.
2 Put your hand through the grip belt.
When recording, make sure your footing is stable and there is no danger of colliding with
another person or object.
When you are outdoors, record pictures with the sunlight behind you. If the subject is
backlit, it will become dark in the recording.
Keep your arms near your body and separate your legs for better balance.
Do not cover the microphones with your hand etc.
Basic motion picture recording
The unit should normally be held steady when recording.
If you move the unit when recording, do so slowly, maintaining a constant speed.
The zoom operation is useful for recording subjects you cannot get close to, but overuse of
zoom in and zoom out can make the resulting motion picture less enjoyable to watch.
Recording yourself
Rotate the LCD monitor towards the lens side.
The image is horizontally flipped as if you see a mirror
image. (However the image recorded is the same as a
normal recording.)
Only some indications will appear on the screen. When
appears, return the direction of the LCD monitor to
normal position and check the warning/alarm indication.
(l 78)
Basic
Before recording
- 19 -
Open the lens cover before turning on the unit. (l 7)
1 Change the mode to and
open the LCD monitor.
2 Press the recording start/stop
button to start recording.
A When you begin recording, ; changes to ¥.
3 Press the recording start/stop button again to pause recording.
About the screen indications in the motion picture recording
Basic
Recording motion pictures
Recording mode
R 1h20m
Approximate remaining recordable time
When the remaining time is less than
1 minute, R 0h00m flashes red.
0h00m00s
Recording time elapsed
“h” is an abbreviation for hour, “m” for
minute and “s” for second.
Each time the unit is put into recording
pause, the counter display will be reset
to 0h00m00s.
0h00m00s0h00m00s0h00m00s
R 1h20mR 1h20mR 1h20m
- 20 -
The images recorded between pressing the recording start/stop button to start recording
and pressing it again to pause recording become one scene.
The scenes longer than approximately 20 minutes will be automatically divided. (Recording
will continue.)
Screen will pause momentarily when the recording is paused.
(Maximum recordable scenes on a single SD card)
Recordable scenes : Approx. 89100
Different dates (l 51) : Approx. 900
Maximum number of recordable scenes and maximum number of different dates will be
less than above table when there are both scenes and still pictures recorded on SD card.
While recording is in progress, the recording will not stop even if the LCD monitor is closed.
Please refer to page 88 for details about approximate recordable time.
About the compatibility of the recorded motion pictures
They are not compatible with devices other than those that support MP4. Images
cannot be played with equipment that does not support MP4. Confirm that your
equipment supports MP4 by referring to the operating instructions.
There are some cases where the recorded motion pictures cannot be played back,
even if the device supports MP4. In such a case, play back on this unit instead.
1 / 1

Panasonic HCV10EP Operating instructions

Category
Camcorders
Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document