Philips MCM302/05, MCM302/12 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Philips MCM302/05 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MCM302
What’s in the Box?
You should nd these items upon opening the box.
FM antenna
Quick Start Guide
Remote Control
Pull out the plastic pro-
tective sheet before use.
Quick Start Guide
Power cord
User Manual
MCM302_QSG_Eng.indd 1MCM302_QSG_Eng.indd 1 2009-2-27 13:15:562009-2-27 13:15:56
1
2
3
4
In the standby mode, press and hold CLOCK to activate the clock setting mode.
The hour digits are displayed and begin to blink.
If the hour digits are not displayed, press and hold for more than 2 seconds to switch to
standby mode, then repeat step 1.
Press
+ VOL - to set the hour.
The minute digits are displayed and begin to blink.
Press + VOL - to set the minute.
Press
CLOCK to con rm the clock setting.
1
2
3
Set clock
Connect the speaker cables.
Connect the FM antenna.
Connect the power cord of the system.
2
3
1
Tip
See the User Manual for how to connect
other equipment to this system.
Speaker
(right)
Speaker
(left)
FM antenna
AC power
MCM302_QSG_Eng.indd 2MCM302_QSG_Eng.indd 2 2009-2-27 13:16:012009-2-27 13:16:01
4
3
2
1
Play from disc
Press CD to select the CD source.
Press OPEN/CLOSE .
The disc tray opens.
Place a disc onto the tray and press OPEN/CLOSE .
Ensure that the label is facing upwards.
Playback will start automatically.
If play does not start, press /
to select a track and then
press
ÉÅ
.
1
4
5
6
2
3
Flip open the cover marked USB DIRECT on the top panel.
Insert the USB plug of a USB device into the exposed socket.
Press USB to select the USB source.
The total number of tracks is displayed.
Press PRESET/ALBUM +/- to select a folder.
Press /
to select a le.
Press
ÉÅ
to start play.
Play from USB
CD
MCM302_QSG_Eng.indd 3MCM302_QSG_Eng.indd 3 2009-2-27 13:16:022009-2-27 13:16:02
1
2
3
Press FM.
Press and hold
/ for 2 seconds to activate automatic programming.
All available stations are programmed in the order of waveband reception strength.
Press PRESET/ALBUM +/- to select a preset number that you want.
Program and tune to radio stations
PDCC-JS-WP-0903
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
C
Royal Philips Electronics N.V. 2009
All rights reserved.
http://www.philips.com
MCM302_QSG_Eng.indd 4MCM302_QSG_Eng.indd 4 2009-2-27 13:16:032009-2-27 13:16:03
/