1
2
3
4
In the standby mode, press and hold CLOCK to activate the clock setting mode.
➜
The hour digits are displayed and begin to blink.
➜
If the hour digits are not displayed, press and hold for more than 2 seconds to switch to
standby mode, then repeat step 1.
Press
+ VOL - to set the hour.
➜
The minute digits are displayed and begin to blink.
Press + VOL - to set the minute.
Press
CLOCK to confi rm the clock setting.
1
2
3
Set clock
Connect the speaker cables.
Connect the FM antenna.
Connect the power cord of the system.
2
3
1
Tip
See the User Manual for how to connect
other equipment to this system.
Speaker
(right)
Speaker
(left)
FM antenna
AC power
MCM302_QSG_Eng.indd 2MCM302_QSG_Eng.indd 2 2009-2-27 13:16:012009-2-27 13:16:01