Sony XS-F1020SL Operating instructions

Brand: Sony

Model: XS-F1020SL

Type: Operating instructions

Sony XS-F1020SL is a 2-way coaxial speaker system designed for car audio applications. It features a 10 cm polypropylene cone woofer and a 2.5 cm PEI balanced dome tweeter, providing a wide frequency response from 45 Hz to 30 kHz. With a maximum input power of 80 W and a rated input power of 25 W, this speaker system can deliver powerful and dynamic sound. The 4 ohms impedance ensures compatibility with most car audio systems. Its compact size and versatile mounting options make it suitable for a variety of vehicle applications, including door panels and dashboards.

XS-F1020SL

Sony Corporation  2000 Printed in China

Instructions

Dimensions

Precautions

•Do not continuously drive the speaker system over the power handling capacity.

•Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the

speaker system to protect them from damage caused by the magnets in the speakers.

If you cannot find an appropriate mounting location, consult your car dealer or your nearest Sony

dealer before mounting.

Specifications

Speaker Coaxial 2-way:

Woofer 10 cm, polypropylene cone type

Tweeter 2.5 cm

PEI, balance dome type

Maximum input power 80 W

Rated input power 25 W

Impedance 4 ohms

Sensitivity 89 dB/W/m

Frequency response 45 – 30,000 Hz

Mass Approx. 480 g per speaker

Design and specifications are subject to change without notice.

10cm Coaxial

2-way Speaker

3-046-197-11 (1)

* Mounting depthUnit: mm

ø 103

16.5

ø 117

ø 136

1.8 49.3*

ø 90

ø 70

4 – 5 × 7

ø 102

× 1

× 8

M4 × 30

Mark the four bolt holes. Make them 3.3 mm* in diameter.

* When using 4 = 5 mm

Remove the grille net.

Mounting

Parts List

Before Mounting

•A depth of at least 49.3 mm is required for mounting the woofer. Keep the following in mind when

choosing a mounting location.

•A hole may already be provided in the metal frame of the front door.

•Nothing should interfere with the speaker inside the door.

•The speaker inside the door must not come into contact with the window when it is open.

•Be careful that speakers are out of the way of the window cranks, door handles, and arm rests.

If you cannot find an appropriate mounting location, check with your car dealer or consult the

nearest Sony dealer.

This speaker can be made to fit almost any type of car by removing the mounting tabs.

Use clippers or pliers, etc. to cut or snap the mounting tabs off so that it is even with the edge

of the speaker frame as illustrated.

Notes

After removing the mounting tabs, handle the speaker frame with care, as the edges may be sharp.

Mounting example

ø 104

ø3.3 mm*

Speaker

Door panel

Flat mounting (installed flush with the surface of the dash)

× 2

2.5 m

× 2

* White cord — Left speaker

Grey cord — Right speaker

Power amplifier, etc.

Black-striped cord

× 2

Press and insert the edges of the grille net.

How to remove the grille net

ø 91 mm

Sony XS-F1020SL Operating instructions

Sony XS-F1020SL Operating instructions

Sony XS-F1020SL Operating instructions

Related papers

Other documents