AVS 94438 Owner's manual

Installation Instructions

Ventvisor® Deflector

Contents - 2 Piece Set

Page 1 of 3

Contents - 4 Piece Set

Alcohol Pad x4

Alcohol Pad x2Front Driver

Side Visor

Front Passenger

Side Visor

Front Driver

Side Visor

Front Passenger

Side Visor

Rear Driver

Side Visor

Rear Passenger

Side Visor

I - Sheet Number VV31 Rev.C

For proper installation and best possible fit, please read all instructions BEFORE you begin.

For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.

Important Safety Information

• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.

• Do not use automatic “brush-style” car washes.

• Do not use cleaning solvents of any kind.

• Periodically check all components for tightness.

Tools Required

Car Wash Supplies Clean Towel

Preparation Before Painting / Installation

• A trial fit is recommended to ensure proper positioning and fit.

• Check fit of parts before painting as we will not accept the return of modified or painted parts.

• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.

NOTE: Actual product may vary from illustration.

Installation Steps

NOTE: Actual application may vary slightly from illustrations.

1 2

Clean the metal door frame around the

window with an alcohol pad.

free end

top flange

rear

flange

front

flange

free end

Remove tape liner from frear flange. Peel back 2”

(5 cm) of tape line from each end of top flange.

Nut Driver Phillips Screwdriver

Installation Steps

NOTE: Actual application may vary slightly from illustrations.

3

Page 2 of 3

5

4

Using the appropriate tool, loosen but do not

remove the mirror mounting bolts to create a

gap behind the mirror cap in order to install

the front flange of the deflector.

Remove the triangular plastic mirror cap cover on

the inside door panel.

loosen

deflector

Position the deflector on the metal door frame and

gently press exposed tape to secure in place.

6

7 8

With the deflector in its final position, remove

remaining tape liner by pulling on free ends.

Apply pressure along the flange edges to secure in

place.

Retighten mirror mounting bolts and replace

the plastic mirror cap on the inside of door.

To avoid damaging the deflector, do not over-

tighten the mirror mounting bolts.

Repeat Steps 1 - 8 for the passenger side

front deflector.

Installation Steps

NOTE: Actual application may vary slightly from illustrations.

Page 3 of 3

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.

Congratulations!

You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International,

Inc. We take the utmost pride in our products and want you to enjoy years of satisfaction from your investment.

We have made every effort to ensure that your product is top quality in terms of fit, durability, finish and ease of

installation.

4 Piece Set

9

After cleaning with an alcohol pad and peeling back tape liner, repeat Steps 5 - 7 for the rear

deflectors.

Auto Ventshade

TM

, the Auto Ventshade

TM

logo and the AVS

TM

logo are trademarks of Lund International, Inc.

Lund International

800-241-7219 • Visit us at lundinternational.com

™

Page is loading ...

Pasos de instalación

AVISO: La colocación real puede variar con respecto a las ilustraciones.

Página 2 de 2

Cuidado y limpieza

• Limpie solamente con agua jabonosa tibia y seque con un paño limpio.

Felicidades

Usted ha comprado uno de los tantos artículos de calidad de Auto Ventshade™ ofrecidos por Lund International, Inc.

Nuestros productos son nuestro mayor orgullo. Deseamos que disfrute de años de satisfacción con su inversión.

Hemos realizado todos los esfuerzos para asegurarnos de que su producto sea de la mejor calidad en cuanto a

ajuste, durabilidad, acabado y facilidad de instalación.

Juego de cuatro piezas

9

Después de limpiarlo con un paño esterilizado y de quitar la cinta protectora,

repita los Pasos 5 a 7 para los deflectores traseros.

Auto Ventshade

TM

, el logo de Auto Ventshade

TM

y el logo de AVS

TM

son marcas comerciales de Lund International, Inc.

Lund International

800-241-7219 • Visite nuestro sitio Web: lundinternational.com

™

AVS 94438 Owner's manual

This manual is also suitable for

AVS 94438 Owner's manual

in other languages

Related papers

Other documents