Sharp LC32DH500S Operating instructions
- Category
- LCD TVs
- Type
- Operating instructions
This manual is also suitable for
OPERATION MANUAL
Contents ....................................................................... 1
Introduction ................................................................ 2
Dear SHARP customer ................................................. 2
Important Safety Precautions ........................................ 2
Trademarks ................................................................... 2
Remote Control unit ...................................................... 3
TV (Front view) .............................................................. 4
TV (Top and rear view) ................................................... 4
Preparation ................................................................. 5
Supplied accessories .................................................... 5
How to detach the stand of the TV ............................... 5
Optional accessory ....................................................... 5
Inserting the batteries .................................................... 6
Using the Remote Control unit ...................................... 6
Cautions regarding the remote control unit .................... 6
Quick guide .................................................................... 7
Initial installation overview .............................................. 7
Before turning on the power ......................................... 8
Initial Auto Installation .................................................... 9
Checking quality and signal strength ............................. 9
Watching TV ................................................................ 10
Daily operation ............................................................ 10
Switching on/off .......................................................... 10
Switching between analogue and digital broadcasts ... 10
Changing channels ..................................................... 10
Selecting an external video source ...............................10
Selecting language ...................................................... 10
Selecting subtitle language ......................................... 10
EPG ............................................................................ 11
Selecting a programme using EPG ............................. 11
Teletext ...................................................................... 12
Using MHEG-5 application (UK only) .......................... 12
Connecting external devices ........................... 13
Introduction to connections ........................................ 13
HDMI connection ........................................................ 14
Components connection ............................................. 14
VIDEO connection ....................................................... 14
SCART connection ..................................................... 15
PC connection by HDMI (DVI) ..................................... 15
HDMI connection ........................................................ 15
Speaker/amplifier connection ...................................... 15
Inserting a CA card ..................................................... 16
Menu Operation .................................................... 17
What is the MENU? .................................................... 17
Common operations ................................................... 17
Basic Adjustment ............................................... 18
Picture settings ........................................................... 18
AV MODE ................................................................... 18
Sound settings ........................................................... 18
Channel settings ......................................................... 19
Install channels ........................................................... 19
Time settings .............................................................. 19
Option ........................................................................ 19
Lock ........................................................................... 20
Useful viewing functions ................................. 21
Channel list ................................................................. 21
Selecting the channel you want display ...................... 21
Channel information display (DTV only) ....................... 21
Selecting the picture format ........................................ 21
Selecting the picture format manually ......................... 21
Other useful features ......................................... 22
Setting when using external devices ........................... 22
Input source settings .................................................. 22
Connecting a USB device (Media Player function) ....... 22
MEDIA PLAYER FUNCTION ........................................ 22
PHOTO MODE ........................................................... 22
MUSIC MODE ............................................................ 23
MOVIE MODE ............................................................ 23
TEXT MODE ............................................................... 23
USB device compatibility ............................................ 24
Power save settings .................................................... 24
Abbreviation list .......................................................... 24
Appendix ................................................................... 25
Troubleshooting .......................................................... 25
Information on the software license for this product .... 25
Specifications ............................................................. 26
Environmental Specifications ...................................... 26
Information about EU Eco-Label ................................. 27
End of life disposal ..................................................... 28
The illustrations and the OSD in this operation manual are for explanation purposes and may vary slightly from the actual
operations.
The examples used throughout this manual are based on the LC-32DH500E model.
The LC-32DH500E and LC-32DH500S models are compatible with high definition broadcasts, H.264 compressed (MPEG4
H.264, MPEG4 AVC, MPEG4 AVC/H.264).
•
•
•
Contents
1
ENGLISH
ENGLISH
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product.
Do not use liquid cleaners or aerosol cleaners.
Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean
it. Chemicals may cause damage or cracks in the cabient of the TV.
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink,
laundry tub, swimming pool and in a wet basement.
Do not place vases or any other water-filled containers on this product. The water may spill onto the
product causing fire or electric shock.
Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the
product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When
mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the
mounting hardware recommended by the manufacturer.
When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops,
excessive force and uneven floor surface can cause the product to fall from the cart.
Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or
block these vents and openings since insufficient ventilation can cause overheating and/or shorten the
life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can
block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed
place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.
The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impact
applied. If the LCD panel is broken, be careful not to be injured by broken glass.
Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other
heat-generating products (including amplifiers).
Headphones—Do not set the volume at a high level. Hearing experts advise against extended listening at
high volume levels.
To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
Do not display a still picture for a long time, as this could damage the LCD screen.
There is power consumption always if main plug is connected.
Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other
dangerous conditions. Request a qualified person to perform servicing.
The LCD panel is a very high technology product, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of
blue, green or red. This is within product specifications and does not constitute a fault.
Precautions when transporting the TV
When transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the TV by two people holding
it with two hands—one hand on each side of the TV.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Introduction
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-
free operation of your product, please read the Important Safety Precautions carefully before using this product.
Important Safety Precautions
Trademarks
“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”•
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
•
•
The “HD ready” and “HD TV” Logos are trademark of EICTA.
•
The DVB logo is the registered trademark of the Digital Video Broadcasting—DVB—project.
•
DivX® is a registered trademark of DivX, Inc., and is used under license.•
2
Introduction
Remote control unit
1 B Standby/On
Enter standby mode or turn on the
power.
2 p Channel information / EPG
(See pages 11 and 21.)
3 DTV MENU
Display the MEDIA PLAYER screen.
4 0–9
Set the channel in TV mode.
Set the page in Teletext mode.
5 A Flashback
Press to return to the previous
selected channel or external input
mode.
6 DTV
Change between ATV and DTV
mode.
7 f Picture format
Change between different picture
formats (see page 21.)
8 Z Sound Mode
Change between different sound
modes established.
9 a/b/c/d (Cursor)
Select a desired item on the
setting screen.
OK
Execute a command within the
menu screen.
TV/DTV: Display the programme
list. (See page 21.)
10 END
Exit the menu screen.
11 EPG
DTV: To display EPG (Electronic
Programme Guide) screen.
(See page 11.)
12 m Teletext
ATV: Select the TELETEXT mode
(See page 12.)
DTV: Select DTV (MHEG-5) data
broadcasting or TELETEXT.
Select the sound multiplex mode.
(See below.)
19 i (+/-) (Volume)
i (+) Increase the volume.
i (-) Decrease the volume.
20 P (r/s)
TV/DTV: Select the program or move
up or down the channel list pages.
Input source: Switch to TV or DTV
input mode.
Teletext: Move to the next/previous
page.
21 b Input source
Select an input source.
(See page 10.)
22 RADIO
DTV: Switch between RADIO and
DTV mode.
•Due to the large variation in
transmitted volume levels in RADIO
mode, some stations will produce
distortion if the volume level is set
too high.
23 PC
Not used.
24 MENU
Display the MENU screen.
(See page 17.)
25 RETURN
Not used.
26 Colour (Red/Green/Yellow/Blue)
TELETEXT: Select a page. (See
page 12.)
DTV: The coloured buttons are
used to select correspondingly to
the coloured items in the menu
screen.
27 [ Subtitle for Teletext
ATV: Subtitles on / off.
DTV: Display the subtitle selection
screen. (See page 12.)
28 k (Reveal hidden Teletext)
(See page 12.)
29 v (Top/Bottom/Full)
Switch the Teletext image to Top,
Bottom or Full.
30 1 (Subpage)
(See page 12.)
13 ESG
Show the favourite list.
14 3 Freeze / Hold
Freeze a picture (TV) or the Teletext
on the screen (See page 12)
15 SLEEP
Set the sleep timer on (in units of
10 min. up to max. 4 hr) and off.
16 AV MODE
Select a picture mode (See page 18.)
17 e Mute
Switch the sound on and off.
18 2 Audio mode
When one of the 5 Nordic countries
(Sweden, Norway, Finland, Denmark or
Iceland) is selected in the country setting
of Auto Installation, DTV channels are 4
digits. When another country is selected,
DTV channels are 3 digits
.
3
• Using 2 on the remote control unit
DTV mode:
Press 2 to open the multi audio screen. (See page 10.)
Analogue TV mode:
Each time you press 2, the mode switches as illustrated in the following tables
:
Singnal Selectable items
Stereo NICAM STEREO, MONO
Bilingual
NICAM CH A, NICAM CH B, NICAM
CH AB, MONO
Monoaural NICAM MONO, MONO
Singnal Selectable items
Stereo STEREO, MONO
Bilingual
CH A, CH B, CH AB
Monoaural MONO
NICAM TV broadcasts selection
A2 TV broadcasts selection
TV (Front view)
TV (Top and rear view)
Remote control sensor
B (Standby/On) indicator
!
"
LC-32D44E-es.indd 7 2008/02/21 9:50:18
!
%
'
(
"
# $
SPDIF
&
1
SERVICE
1
2
AUDIO IN (DVI)
DIGITAL
AUDIO
OUTPUT
SCART 2
SCART 1
RGB
AV
1.COMP / 2.AV
AUDIO IN
AUDIO (R / L)
2
1
USB
JPEG
MP3
MP4
SOFT
1
2
3
5
4
6
7
8
9
10
11
Introduction
WARNING
Excessive sound pressure from earphones and headphones can cause hearing loss.
Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
•
•
a (Power button)
(MENU button)
b (INPUT SOURCE button)
i(k/l) (Volume buttons)
P(r/s)
(Programme (channel) buttons)
1 USB terminal
2 COMPONENTS / AV terminals
3 HEADPHONES jack
4 SCART 1 (AV/RGB) terminal
5 SCART 2 (AV/S-VIDEO) terminal
6 Antenna input terminal
7 OUTPUT (DIGITAL AUDIO) terminal
8 SERVICE connector (jack 3.5mm)
9 HDMI 1 (HDMI/AUDIO-DVI)
10 HDMI 2 (HDMI/AUDIO-DVI)
11 AUDIO input for DVI
12 COMMON INTERFACE slot
13 AC INPUT terminal
4
Remote control unit
(g1)
AC cord (g1)
Operation manual (This publication)•
“AA” size zinc-carbon battery (g2) •
Product shape varies in
some countries.
Cojín blando
Preparation
Supplied accessories
1 Lay the TV on a table with the way that the stand would stay out of the table and the screen on the surface of
the cushioning as indicated in the drawing.
2 Using a star shaped screwdriver of the proper size (no supplied), remove the screws which fasten the stand as
indicated below:
a. Loosen four screws (Approx. a half-turn)
b. Unscrew completely three of four screws (two from the bottom area and the other one from the upper area)
c. Hold the stand in one hand with the way that the it will not fall down on unscrewing the last screw.
3 Keep the stand and four screws in case you may need to attach them in the future.
NOTE
• To attach the stand, perform the above steps in reverse order.
How to detach the stand of the TV
• This TV is supplied with the stand attached.
• If you need to detach the stand (e.g. to mount the TV on the wall), read carefully these instructions.
CAUTION
• Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before starting to perform, spread a cushioning over the surface of where you will lay the TV on. This will prevent
it from being damaged.
Optional accessory
The listed optional accessories are available for this
LCD colour TV. Please purchase them at your nearest
shop.
Additional optional accessories may be available in the
near future. When purchasing, please read the newest
catalogue for compatibility and check the availability.
•
No. Part name Part number
1
Wall mount bracket
AN-37AG5
Cushion
5
Preparation
Inserting the batteries
Before using the TV for the first time, insert two supplied “AA” size zinc-carbon batteries. When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AA” size batteries.
1 Hold in the tab on the battery cover and pull the cover towards the direction of the arrow.
2 Insert two supplied “AA” size batteries.
• Place batteries with their terminals corresponding to
the (+) and (-) indications in the battery compartment.
3 Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
chemical leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you fi nd
any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Note on disposing batteries:
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial
businesses.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control
unit and sensor may prevent proper operation.
Cautions regarding the remote control unit
Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids,
and do not place in an area with high humidity.
Do not install or place the remote control unit under direct sunlight. The heat
may cause deformation of the unit.
The remote control unit may not work properly if the remote control sensor of
the TV is under direct sunlight or strong lighting. In such cases, change the
angle of the lighting or the TV, or operate the remote control unit closer to the
remote control sensor.
•
•
•
6
Remote control sensor
30°30°
Quick guide
1 2 3
Initial installation overview
Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary
depending on your TV installation and connection.
Connect an antenna cable to
the antenna terminal (Page 8).
If necessary, insert a CA card
into the CI slot to watch
scrambled broadcasts (Pages
8 and 16).
Connect the AC cord to the TV
(Page 8).
Product shape varies in some countries.
n
o
p
Turn on the power using a on
the TV (Page 10).
Run the initial auto installation
(Page 9).
9Language and country
setting
9TV Location setting
n
o
Congratulations!
Now you can watch TV.
If necessary, adjust the
antenna to attain maximum
signal reception (Page 9).
n
o
7
Preparation
Power on and
run the auto
installation
Watch TV
Connect
external devices
Connect external
devices such as a
DVD player/recorder
as instructed (Pages
14 and 15).
Connect external
audio devices such as
speakers/amplifier as
instructed (Pages 14
and 15).
n
o
Start searching
channels
(
HOME
STORE
Quick guide
Fixing the TV on a wall
This TV should be fixed on a wall only with the wall fix bracket available from SHARP (Page 5). The use
of other wall fix brackets may result in an unstable installation and may cause serious injuries.
Fixing the LCD colour TV requires special skills and should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility
for improper fixing or fixing that results in accident or injury.
You can ask qualified service personnel about using an optional bracket to fix the TV on a wall.
To use this TV fixed on a wall, first remove the adhesive tape at the two locations on the rear of the TV, and then
use the screws supplied with the wall fix bracket to secure the bracket to the rear of the TV.
When you fix the TV on a wall, you should attach the supporting post.
•
•
•
•
•
Before turning on the power
8
Carefully insert the CI
Module in the CI slot
with the contact side
forward.
The logo on the CI
Module must be
facing outward from
the rear of the TV.
1
2
AC cord
Place the TV close to the
AC outlet, and keep the
power plug within reach.
Standard
DIN45325 plug
(IEC 169-2) 75 q
coaxial cable.
Product shape varies in some countries.
Quick guide
Initial auto installation
When the TV is powered on for the first time after purchase,
the initial auto installation wizard appears. Follow the menus
and make the necessary settings one after another.
Press a on the TV.
The initial auto installation wizard appears.
Setting the OSD language.
Press
a/b/c/d to select the desired language.
Setting the country.
Press ▲/▼/◄/► to select your country or area.
This setting screen only appears during the first
installation.
4 Starting channel search.
Press ▲/▼ to select “Channel tuning” and then
press OK.
If you want to search for more broadcasts,
execute “DTV (or ATV) manual tuning” from the
menu “CHANNEL” (Page 19).
To watch both analogue broadcasts and digital
broadcasts, you should perform the channel
search setting “DTV+ATV”.
1
•
2
3
•
•
•
5 Selecting the TV location.
Press ◄/► to select where you will use this TV, and
then press OK.
•HOME: For home.
•STORE: DYNAMIC mode is predetermined. If the
“Picture Mode” is changed, the TV will automatically
switch back to “DYNAMIC” when there is no signal input
from the TV or remote control unit for 30 minutes.
If you have chosen “STORE” by mistake, go to “OPTION”
→ “Restore Factory Default” → OK, and the TV returns
to the initial screen.
6 The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
•
To cancel the initial auto installation in progress, press
END.
NOTE
• If you turn the power on the TV after performing step 4,
initial auto installation wizard does not appear. The auto
installation function allows you to execute the installation
again from the “CHANNEL” menu (Page 19).
• The initial auto installation wizard will turn off if your leave
the TV unattended for 30 minutes before searching for
channels in step 4.
• After initial Auto Tuning is completed, the default PIN is
automatically set to “1234”. To change the PIN setting,
refer to “LOCK” menu on page 20.
If you install a DVB-T antenna for the first time of relocate
it, you should adjust the alignment of the antenna to
receive a good reception while checking the antenna
setup screen.
1 Press a channel you want to check.
2 Press MENU. “PICTURE” menu will appear.
3 Press ◄/► to select “CHANNEL” menu.
4 Press ▲/▼ to select “Signal Information” and
then press OK.
5
P
osition and align the antenna so that the maximum
possible values for “Quality” and “Strength” are
obtained.
NOTE
The values of “Quality” and “Signal Strength” indicate when to
check the appropriate alignment of the antenna.
Checking quality and
signal strength
HOME
STORE
9
Confirm the following before turning
on the power
Is the antenna cable connected?
Is the AC cord plugged in?
E
E
Watching TV
Selecting language audio
DTV mode:
Pressing 2 appear a menu with languages or
audio sources availables depending on the received
broadcast.
Press a/b to select the language and press OK.
NOTE
The audio mode screen disappears in three seconds.
Selectable items vary depending on the received
broadcasts.
ATV mode:
Each time you press 2, the mode switches as
shown in the following tables.
NICAM TV broadcasts selection
Signal Selectable items
Stereo
NICAM STEREO, MONO
Bilingual
NICAM CH A, NICAM CH B, NICAM CH AB, MONO
Monaural
NICAM MONO, MONO
A2 TV broadcasts selection
Signal Selectable items
Stereo
STEREO, MONO
Bilingual
CH A, CH B, CH AB
Monaural
MONO
NOTE
When no signal is received, the audio mode will display
“MONO”.
DTV mode: Press SUBTITLES [ button to
access “Subtitles Languages”
ATV mode: The available subtitles according to
the broadcasting will be enabled or disabled by
pressing the Subtitle key
[.
E
•
•
E
•
E
E
Press “DTV” to change between ATV and
DTV mode.
E
Daily operation
Switching on/off
Turning on/off the power
Press a on the TV to switch it on.
Switch it off by pressing a on the TV.
Standby mode
Switching to standby mode
If the TV is switched on, you can switch it to standby
by pressing B on the remote control unit.
Switching on from standby
From standby, press B on the remote control unit.
TV indicator status
B indicator
Status
Off
Power off
Green
Power on
Red
Standby
NOTE
If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
A small amount of electric power is still consumed even
when a is turned off.
E
E
•
•
Switching between analogue and
digital broadcasts
Changing channels
With 0–9:
With Pr/s:
Selecting an external video source
Once the connection is made,
press b to display the
“INPUT SOURCE” screen,
and then press a/b to
switch over to the appropriate
external source with OK.
Switching subtitle languages
10
NOTE
When turning off the power using
a on the TV, EPG data will be lost.
•
The terminal layout may differ
depending on the model.
*
(
Select a program
Select the time span
Press c/d to select the time span you want to search.
Continue to press d to display programs in the next time span.
Select the desired program
Press a/b to select the desired program.
If a or b are displayed on the left of the programs, continue to press a/b to display next or previous screen.
E
1
•
2
•
Watching TV
Selecting a programme using EPG
Basic Operation
The illustrations on this page are explained using three digit services.
Display/Close the EPG screen
Press EPG.
E
EPG
EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule of DTV, view
detailed information about it, tune to an event currently on-air and set a timer for future events.
Other EPG functions
Revise the program information
1
Press ▲/▼/◄/► to select the program you
want to revise.
2 Press
“p.
3 Press p to return to EPG.
“Reminder” function
1 Select the broadcasting emitting the program
which you want to remember.
3
4
2 Press the BLUE key on the remote control.
3
With ▲/▼/◄/► select Hour, Minute, Mode, Date
and Month which you want the program to be
remembered. Press OK.
• This program stays skipped in red within the
programming guide.
”Schedule” function
1 Press the YELLOW key to visualize all
programmed reminders.
5
Program information
11
2
1
3
4
5
Buttons for teletext operations
Buttons Description
Pr/s
Increase or decrease the page number.
Colour (R/G/
Y/B)
Select a group or block of pages
displayed in the coloured brackets at the
bottom of the screen by pressing the
corresponding Colour (R/G/Y/B) on the
remote control unit.
0–9
Directly select any page from 100 to 899
by using the 0–9 numeric buttons.
v (Top/
Bottom/Full)
Switch the teletext image to Top, Bottom
or Full.
k (Reveal
hidden
Teletext)
Reveal or hide hidden information such
as an answer to a quiz.
3 (Freeze/
Hold)
Stop updating teletext pages
automatically or release the hold mode.
[ (Subtitle
for Teletext)
Display the subtitle or exit the subtitle
screen.
Subtitles will not be displayed when
the service does not contain subtitle
information.
•
1 (Subpage)
TXT mode: Reveal or hide subpages.
R button: Move to the previous
subpage.
G button: Move to the following
subpage.
These two buttons are shown on the
screen by the symbols “e” and “f”.
TV mode: Display the time.
•
•
•
Using the MHEG-5 application (UK
only)
Some services bring you programmes with the MHEG
application encoded, letting you experience DTV
interactively.
When provided, the MHEG-5 application will start
when you press m.
Sample MHEG-5 screen
Watching TV
Teletext
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped TV. Your TV
receives teletext signals broadcast by a TV network,
and decodes them into graphical format for viewing.
News, weather and sports information, stock
exchange prices and programme previews are among
the many services available.
Turning Teletext on/off
Select a TV channel or external source providing
a teletext programme.
Press m to display the Teletext.
Many stations use the TOP operating system, while
some use FLOF (e.g. CNN). Your TV supports both
these systems. The pages are divided into topic
groups and topics. After switching on the teletext, up
to 1.000 pages are stored for fast access.
Each time you press m, the screen switches as
shown below.
If you select a programme with no teletext signal, “No
Teletext available” displays.
The same message displays during other modes if no
teletext signal is available.
1
2
•
•
•
•
NOTE
Teletext will not work if the selected signal type is RGB.•
2 Press ▲/▼ to select a reminder and then press
the RED key to delete it.
Teletext
Teletext
12
Teletext
Connecting external devices
Before connecting ...
Be sure to turn off the TV and any devices before making any connections.
Firmly connect a cable to a terminal or terminals.
Carefully read the operation manual of each external device for possible connection types. This also helps you
get the best possible audiovisual quality to maximise the potential of the TV and the connected device.
Introduction to connections
The TV is equipped with the terminals as shown below. Find the cable corresponding the TV’s terminal and
connect the device.
NOTE
The cables illustrated in pages 13, 14 and 15 are commercially available items.
E
•
•
•
•
O
LC-37DH77E_ES.indd 14 2008/12/16 13:50:00
13
Audio device (Page 15)
Video recording device
(Pages 14 and 15)
Game console or
camcorder (Page 14)
HDMI-certified cable
DVI/HDMI Cable
ø 3.5 mm stereo mini jack cable
AV cable
Audio cable
Audio cable
SCART cable
Components cable
Audio cable
HDMI device (Page 14)
or
Connecting external devices
HDMI connection
The HDMI connections permit digital video and audio
transmission via a connection cable from a player/
recorder. The digital picture and sound data are
transmitted without data compression and therefore
lose none of their quality. Analogue/digital conversion
is no longer necessary in the connected devices, which
also would result in quality losses.
DVI/HDMI conversion
Using a cable DVI/HDMI, the digital signals of a DVD
video, can be also reproduced through a compatible
HDMI connection. The sound should be supplied
additionally.
• On connecting a DVI/HDMI cable to the HDMI terminal, may
be the picture does not become visualized clearly.
• Both HDMI and DVI use the same method of HDCP protection
against copy.
• For connecting a DVI cable, a commercially available adaptor
(not supplied) is necessary.
NOTE
• Depending on the type of HDMI cable used, it may appear
a video noise. Be sure to use a certified HDMI cable.
• On reproducing HDMI picture, the best format is
automatically detected and adjusted for the picture
.
Compatible video signal
576i, 576p, 480i, 480p, 1080i, 720p, 1080p
Component connection
You will enjoy accurate colour reproduction and high
quality images through the INPUT COMPONENTS /
AV terminal when connecting a DVD player/recorder or
other device.
You can use the INPUT COMPONENTS / AV / AUDIO
terminal when connecting to a game console, camcorder,
a DVD player / recorder or other device.
VIDEO connection
LC-37DH77E_ES.indd 15 2008/12/16 13:50:03
AUDIO IN
HDMI (DVI)
9 0
"
#
"
,2 0
2
#
2
#/-0/.%.4!5$)/
LC-37DH77E_ES.indd 15 2008/12/16 13:50:03
INPUT
COMPONENTS
/AV
Y/
AV
Pb
Pr
L
R
AUDIO
LC-37DH77E_ES.indd 15 2008/12/16 13:50:03
INPUT
COMPONENTS
/AV
Y/
AV
Pb
Pr
L
R
AUDIO
14
DVI/HDMI
cable
ø 3.5 mm
stereo mini
jack cable
HDMI-certified
cable
Audio cable
Components
cable
AV cable
Example of connectable devices
●
DVD player/recorder
●
Blu-ray player/recorder
●
Game console
Example of connectable devices
●
VCR
●
DVD player/recorder
●
Blu-ray player/recorder
Example of connectable devices
●
VCR
●
DVD player/recorder
●
Blu-ray player/recorder
●
Game console
●
Camcorder
YPB
(
CB)
PR
(
CR)
Connecting external devices
NOTE
In cases when the decoder needs to receive a signal from
the TV, make sure to select the appropriate input terminal
to which the decoder is connected in “Input Source” (Page
10).
•
SCART connection
Example of connectable devices
● VCR ●
Decoder (only SCART 1)
●
DVD player/recorder
HDMI (DVI) Connection
ø 3,5 mm stereo mini jack cable
HDMI 1 or 2
HDMI-certified cable
DVI/HDMI Cable
PC connection through HDMI (DVI)
LC-37DH77E_ES.indd 16 2008/12/16 13:50:06
SCART 1
(AV / RGB)
Speaker/amplifier connector
Connect an amplifier with external speakers as shown
below.
15
SCART cable
Decoder
DIGITAL AUDIO IN
SPDIF
DIGITAL
AUDIO
OUTPUT
SPDIF
Audio cable
Amplifier with
digital audio input
●
● After connection
● If after connecting a PC to the TV through a
HDMI cable, the audio does not run, connect a mini
stereo connector of ø 3.5mm between TV and PC
as indicated in the previous drawing.
● When a PC is connected to the TV with a DVI
cable, it will be necessary to connect a mini stereo
connector of ø 3.5mm of the TV to PC as indicated
in the previous drawing
0#
0#
LC-37DH77E_ES.indd 35 2008/12/16 13:50:34
AUDIO IN
HDMI (DVI)
●
● After connecting
Digital audio output setting
After connecting an amplifier with digital audio
input and external speakers as shown, you should
set an audio output format compatible with
the programme you are watching or the device
connected.
Go to “MENU” > “SOUND” > “SPDIF Mode”
> select “PCM” or “Dolby Digital”.
NOTE
When you set this to “Dolby Digital”, and you receive
the Dolby Digital or Dolby Digital Plus audio formats,
Dolby Digital audio is output. Otherwise, PCM audio is
output.
When you set this to “PCM”, PCM audio is output no
matter what audio formats you receive.
•
Example of connectable devices
●
Connecting an amplifier with digital audio
input
Connecting external devices
Inserting a CA Card
In order to receive coded digital stations, a Common
Interface Module (CI Module) and a CA Card must be
inserted in the CI slot of the TV (Page 8).
The CI Module and the CA Card are not supplied
accessories. They are usually available from your
dealers.
Inserting the CA Card into the CI Module
With the side with the gold coloured contact
chip facing the side of the CI Module marked
with the provider’s logo, push the CA Card
into the CI Module as far as it will go. Note the
direction of the arrow printed on the CA Card.
Inserting the CI Module in the CI slot
Carefully insert the CI
Module in the CI slot
with the contact side
forward. The logo on
the CI Module must be
facing outward from the
rear of the TV. Do not use
excessive force. Make
sure the module is not
bent in the process.
1
2
Checking CI Module information
NOTE
Make sure that the CI Module is properly inserted.
This menu is only available for digital stations.
Press MENU and the “PICTURE” menu is
shown.
Press c/d to select “CHANNEL” menu.
The content of this menu depends on the provider of
the CI Module.
Press a/b to select “CI information”, and then
press OK.
•
•
1
2
•
3
16
●
● Module
General information on CI Module displays.
●
● Menu
Adjustment parameters of each CA Card displays.
●
● Enquiry
You can input numerical values such as passwords
here.
NOTE
The content of each screen depends on the provider of
the CI Module.
NOTE
“MENU” options differ in the selected input modes, but the operating procedures are the same.
The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from
the actual screens.
Items with 4 in darker grey cannot be selected for various reasons.
•
•
•
Menu operation
1
3
2
What is the MENU?
You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “MENU”.
The “MENU” enables various settings and adjustments.
The “MENU” can be operated with the remote control unit and with the TV panel control keys.
Common operations
•
•
•
Operation without a remote control unit
(with the TV panel control keys)
About the Guide Display
The Guide Display at the bottom of the screen shows
operations with the OSD.
The bar above is an operational guide for the remote
control unit. The bar will change in accordance with
each menu setting screen.
Picture mode User Eco
Picture mode User
Backlight 50
Contrast 50
Backlight 50
This function is useful when there is no
remote control unit within your reach.
Press MENU and the “PICTURE”
screen displays.
Press Pr/s instead of a/b or
ik/l instead of c/d to select
the item.
Press b to complete the setting.
1
2
3
NOTE
The “PICTURE” screen will disappear if left unattended for
several seconds.
•
17
Display the
PICTURE Screen
Exit the PICTURE
screen
Select an item
Press MENU and the “PICTURE”
screen displays.
The operation will exit the “PICTURE”
screen if you press END before it is
completed.
Press a/b/c/d to select/adjust the
desired menu, and adjust the item to
the desired level, and then press OK.
Press MENU to return to the previous
“PICTURE” page.
Selecting in the MENUE
Selecting optionsE
PICTURE
Picture mode User
Backlight 50
Contrast 50
Brightness 50
Colour 50
Sharpness 60
END MENU OK
PICTURE
Tint 50
Colour temperature Cool
Aspect ratio
Full
Noise reduction AUTO
END MENU OK
END MENU OK
(
Basic adjustment
Audio settings
When the Sound Mode is set to “User”, the sound
can be adjusted according to your preferences. See the
following setting table.
Adjustments options
Selected
setting
◄ Button ► Button
Treble Reduce trebles Increase trebles
Bass Reduce bass Increase bass
Balance Increase audio from
the left speaker
Increase audio from
the right speaker
Auto
Volume
Off On
Surround
Sound
Off On
SPDIF
Mode
(PCM) Activates
digital audio output
Dolby Digital
●
Sound Mode Z
Select your desired setting. The available options
are:
Standard→Music→Movie→Sports→User
6
●
Auto Volume
Reduces sudden volume changes, for example,
during commercials or when switching from one
channel to another.
●
● Surround Sound
This function allows you to enjoy surround sound.
●
● SPDIF Mode
Digital audio output.
Picture settings
When the Picture Mode is set to “User”, the picture
can be adjusted according to your preferences. See
the following setting table.
Adjustments options
Selected
setting
◄ Button ► Button
Backlight
The screen dims
The screen
brightens
Contrast Contrast goes down Contrast goes up
Brightness
Brightness goes
down
Brightness goes up
Colour
Colour intensity goes
down
Colour intensity
goes up
Sharpness Soften details Emphasize details
Tint
Skin tones become
purplish
Skin tones become
greenish
Colour
Temperature
Reddish white Bluish white
Aspect Ratio
Changes between different picture sizes
Noise
Reduction
*
Improves picture quality
(choose among different options)
*
This function may be not available in some types of input
signal.
AV MODE
“AV MODE” gives you several viewing options to
choose from to best match your system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image input
from external equipment.
1 Press AV MODE.
2 Every time AV MODE is pressed the TV changes
the mode as follows:
Standard → Soft → Eco → User → Dynamic
6
Picture adjustments
Picture
Sound
Sound adjustments
PICTURE
Picture mode User
Backlight 50
Contrast 50
Brightness 50
Colour 50
Sharpness 60
END MENU OK
18
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
Sharp LC32DH500S Operating instructions
- Category
- LCD TVs
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sharp 20D2-SS User manual
-
Sharp LC32FH510E Operating instructions
-
-
-
-
-
-
Sharp LC-42DH77S User manual
-
-
Other documents
-
Medion P13077 User manual
-
Seiki SE32HY01UK User manual
-
-
Alba LE-24GY15-T2 User manual
-
Logik L22FE12 User manual
-
Logik L39FE12 User manual
-
Hitachi LE42EC04A User manual
-
-
-