Samsung LN32B460B2D User manual

Category
LCD TVs
Type
User manual
English-1
1-800-SAMSUNG (7267864)
Samsung Electronics America, Inc.
105 Challenger Road Ridgefield Park, NJ 07660-0511
Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Call center hours of operation (Mon-Sun 9AM-12AM EST).
To register this product please visit
www.samsung.com/register.
LN22B460 / LN26B460
Rear Panel (LN22B460)
9
8
0!@
21 3 4 5 6 7
1 EX-LINK
2 DIGITAL AUDIO OUT (OPTICAL)
3 PC IN [PC] / [AUDIO]
4 H (HEADPHONE)
5 HDMI (DVI) IN /
DVI AUDIO IN [R-AUDIO-L]
6 SERVICE
7 ANT IN
8 POWER INPUT
9 KENSINGTON LOCK
0 AV IN
! COMPONENT IN
@ AUDIO OUT
Quick Setup Guide
STOP
Please do not return
this unit
If you are having problems operating
this TV,
Please call;
1-800-SAMSUNG (1-800-726-7864)
For web support please visit
www.samsung.com/support
LN32B460
[QSG]BN68-02035A-00Eng.indd 1 2009-03-03 �� 10:13:18
English-2
Rear Panel (LN26B460, LN32B460)
@
0
1
!
1 52 43
7 86 9
1 HDMI IN 1(DVI), 2, 3 /
DVI AUDIO IN [R-AUDIO-L]
2 PC IN [PC] / [AUDIO]
3 HEADPHONE
4 DIGITAL AUDIO OUT (OPTICAL)
5 SERVICE
6 COMPONENT IN / AV IN 1
7 ANT IN
8 AUDIO OUT
9 EX-LINK
0 KENSINGTON LOCK
! AV IN 2
@ POWER INPUT
Audio Output Performance Comparison
OPTICAL (Digital)
AUDIO (Analog)
Best
Normal
Video Input Performance Comparison
HDMI/DVI
PC/COMPONENT
VIDEO
Best
Better
Normal
/
/
[QSG]BN68-02035A-00Eng.indd 2 2009-03-03 �� 10:13:19
English-3
Remote Control
See “Remote Control” in the owner’s instructions for details.
1
POWER
Turns the TV on and off.
2
NUMERIC BUTTONS
Press to change the channel.
3
_
Press to select additional
channels (digital and analog)
being broadcast by the same
station. For example, to select
channel ‘54-3’, press ‘54’, then
press ‘_’ and ‘3’.
4
MUTE M
Press to temporarily cut off the
sound.
5
- VOL +
Press to increase or decrease
the volume.
6
CH LIST
Used to display Channel Lists
on the screen.
7
TOOLS
Use to quickly select frequently
used functions.
8
INFO
Press to display information on
the TV screen.
9
COLOR BUTTONS
Use these buttons in the
Channel list menus etc.
0
P.SIZE
Picture size selection.
!
TV
Selects the TV mode directly.
@
PRE.CH
Tunes to the previous channel.
#
z
Press to change channels.
$
SOURCE
Press to display and select the
available video sources.
%
FAV.CH
Press to switch to your favorite
channels.
^
MENU
Displays the main on-screen
menu.
&
RETURN
Returns to the previous menu.
*
UP▲/DOWN▼/LEFT◄/
RIGHT►/ENTERE
Use to select on-screen menu
items and change menu values.
(
EXIT
Press to exit the menu.
)
CC
Controls the caption decoder.
a
MTS
Press to choose stereo, mono or
Separate Audio Program (SAP
broadcast).
1
!
@
#
$
%
^
&
*
(
)
a
2
3
4
5
6
7
8
9
0
[QSG]BN68-02035A-00Eng.indd 3 2009-03-03 �� 10:13:19
English-4
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via DVI
TV Rear Panel
1
DVI to HDMI Cable (Not supplied)
2
Audio Cable (Not supplied)
1
Connect a DVI to HDMI Cable or
DVI-HDMI Adapter between the HDMI
(DVI) IN jack on the TV and the DVI
jack on the DVD / Blu-ray player /
Cable Box / Satellite receiver (Set-Top
Box).
2
Connect Audio Cables between the
DVI AUDIO IN [R-AUDIO-L] jack on
the TV and the DVD / Blu-ray player /
Cable Box / Satellite receiver (Set-Top
Box).
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via HDMI
1
What is HDMI?
HDMI(High-Definition Multimedia
Interface), is an interface that enables the
transmission of digital audio and video
signals using a single cable.
The difference between HDMI and DVI
is that the HDMI device is smaller in
size and has the HDCP (High Bandwidth
Digital Copy Protection) coding feature
installed.
Connect an HDMI Cable between
the HDMI (DVI) IN jack on the TV
and the HDMI jack on the DVD
/ Blu-ray Player or Cable Box /
Satellite receiver (Set-Top Box).
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable.
Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
The TV may not output sound and pictures may be displayed with abnormal color when DVD / Blu-ray player / Cable Box / Satellite receiver
(Set-Top Box) supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect
the HDMI cable to the HDMI (DVI) IN jack and the audio cables to the DVI AUDIO IN [R-AUDIO-L] jacks on the back of the TV. If this happens,
contact the company that provided the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) to confirm the HDMI version, then
request an upgrade.
HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
TV Rear Panel
HDMI Cable (Not supplied)
1
Connections (LN22B460)
[QSG]BN68-02035A-00Eng.indd 4 2009-03-03 �� 10:13:20
English-5
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver
(Set-Top Box) via Component cables
TV Rear Panel
1
Component Cable (Not supplied)
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
2
Audio Cable (Not supplied)
1
Connect a Component Cable between
the COMPONENT IN [Y, PB, PR] jacks
on the TV and the COMPONENT [Y,
PB, PR] jacks on the DVD / Blu-ray
player / Cable Box / Satellite receiver
(Set-Top Box).
2
Connect Audio Cables between the
COMPONENT IN [R-AUDIO-L] jacks
on the TV and the AUDIO OUT jacks
on the DVD / Blu-ray player / Cable
Box / Satellite receiver (Set-Top Box).
Component video separates the video into
Y (Luminance (brightness)), Pb (Blue) and
Pr (Red) for enhanced video quality. Be sure
to match the component video and audio
connections. For example, if connecting a
Component video cable to COMPONENT IN,
connect the audio cable to COMPONENT IN
also.
Each DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box) has a different
back panel configuration.
When connecting a DVD / Blu-ray player /
Cable Box / Satellite receiver (Set-Top Box),
match the color of the connection terminal to
the cable.
Connecting a VCR
If you have a ‘mono’ (non-stereo) VCR,
use a Y-connector (not supplied) to
connect to the right and left audio input
jacks of the TV. Alternatively, connect
the cable to the ‘R’ jack. If your VCR is
stereo, you must connect two cables.
Each VCR has a different back
panel configuration.
When connecting a VCR, match
the color of the connection
terminal to the cable.
TV Rear Panel
2
Audio Cable (Not supplied)
VCR Rear Panel
1
Video Cable (Not supplied)
2
Connect Audio Cables between
the AV IN [R-AUDIO-L] jacks
on the TV and the AUDIO OUT
jacks on the VCR.
1
Connect a Video Cable
between the AV IN [VIDEO]
jack on the TV and the VIDEO
OUT jack on the VCR.
[QSG]BN68-02035A-00Eng.indd 5 2009-03-03 �� 10:13:22
English-6
Connecting a Digital Audio System
TV Rear Panel
1
Optical Cable (Not supplied)
Digital Audio System
1
Connect an Optical Cable
between the DIGITAL AUDIO
OUT (OPTICAL) jacks on the
TV and the Digital Audio Input
jacks on the Digital Audio
System.
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV and
adjust the volume level with the system’s volume control.
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
Each Digital Audio System has a different back panel configuration.
When the Home Theater receiver is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying
a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component
such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) and is connected to the TV via HDMI, only 2
channel sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel audio, connect the digital audio
out jack on DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) directly to an Amplifier or Home Theater, not the
TV.
Connecting an Amplifier / DVD Home Theater
TV Rear Panel
1
Audio Cable (Not supplied)
Amplifier/DVD Home Theater
1
Connect Audio Cables between the
AUDIO OUT [R-AUDIO-L] jacks on
the TV and Audio Input jacks on the
Amplifier / DVD Home Theater.
When an audio amplifier is connected
to the AUDIO OUT [R-AUDIO-L]
jacks: Decrease the volume of the TV
and adjust the volume level with the
Amplifier’s volume control.
Each Amplifier/DVD Home Theater has
a different back panel configuration.
When connecting an Amplifier/DVD
Home Theater, match the color of the
connection terminal to the cable.
[QSG]BN68-02035A-00Eng.indd 6 2009-03-03 �� 10:13:23
English-7
Using a Video Cable
Connecting a Camcorder
1
Connect a Video Cable between the
AV IN [VIDEO] jack on the TV and
the VIDEO OUT jack on the cam-
corder.
Camcorder
TV Rear Panel
Using an HDMI Cable
1
Connect an HDMI Cable between
the HDMI (DVI) IN jack on the TV
and the HDMI OUT jack on the
camcorder.
HD Camcorder
TV Rear Panel
1
HDMI Cable (Not supplied)
2
Audio Cable (Not supplied)
1
Video Cable (Not supplied
2
Connect Audio Cables between the
AV IN [R-AUDIO-L] jacks on the TV
and the AUDIO OUT jacks on the
camcorder.
Each Camcorder has a different back panel configuration.
When connecting a Camcorder, match the color of the connection terminal to the cable.
[QSG]BN68-02035A-00Eng.indd 7 2009-03-03 �� 10:13:24
English-8
Connecting a PC
TV Rear Panel
1
D-Sub Cable
(Not supplied)
PC
2
PC Audio Cable
(Not supplied)
1
Connect an HDMI/DVI cable
between the HDMI (DVI) IN jack on
the TV and the PC output jack on
your computer.
2
Connect a 3.5 mm Stereo miniplug
/ 2RCA Cable between the DVI
AUDIO IN [R-AUDIO-L] jack on the
TV and the Audio Out jack of the
sound card on your computer.
Using an HDMI/DVI Cable
Using a D-Sub Cable
TV Rear Panel
PC
1
HDMI/DVI Cable
(Not supplied)
2
3.5 mm Stereo mini-plug/
2RCA Cable (Not supplied)
Using an HDMI/DVI Cable
1
Connect a D-Sub Cable between
PC IN [PC] connector on the TV
and the PC output connector on
your computer.
2
Connect a PC Audio Cable
between the PC IN [AUDIO] jack
on the TV and the Audio Out jack of
the sound card on your computer.
Using a D-Sub Cable
When connecting a PC, match the
color of the connection terminal to the
cable.
1
Connect an HDMI cable between
the HDMI (DVI) IN jack on the TV
and the PC output jack on your
computer.
Using an HDMI Cable
Each PC has a different back panel
configuration.
TV Rear Panel
Using an HDMI Cable
1
HDMI Cable
(Not supplied)
PC
[QSG]BN68-02035A-00Eng.indd 8 2009-03-03 �� 10:13:25
English-9
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via HDMI
1
What is HDMI?
HDMI(High-Definition Multimedia
Interface), is an interface that enables the
transmission of digital audio and video
signals using a single cable.
The difference between HDMI and DVI
is that the HDMI device is smaller in
size and has the HDCP (High Bandwidth
Digital Copy Protection) coding feature
installed.
Connect an HDMI Cable between
the HDMI IN (1(DVI), 2 or 3) jack
on the TV and the HDMI jack on
the DVD Player or Cable Box /
Satellite receiver (Set-Top Box).
Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
The TV may not output sound and pictures may be displayed with abnormal color when DVD / Blu-ray player / Cable Box / Satellite receiver
(Set-Top Box) supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect
the HDMI cable to the HDMI IN 1(DVI) jack and the audio cables to the DVI AUDIO IN [R-AUDIO-L] jacks on the back of the TV. If this happens,
contact the company that provided the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) to confirm the HDMI version, then
request an upgrade.
HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
DVD / Blu-ray player /
Cable Box /
Satellite receiver
(Set-Top Box)
TV Rear Panel
HDMI Cable (Not supplied)
1
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via DVI
TV Rear Panel
1
DVI to HDMI Cable (Not supplied)
2
Audio Cable (Not supplied)
1
Connect a DVI to HDMI Cable or
DVI-HDMI Adapter between the
HDMI IN 1(DVI) jack on the TV and
the DVI jack on the DVD / Blu-ray
player / Cable Box / Satellite receiver
(Set-Top Box).
2
Connect Audio Cables between the
DVI AUDIO IN [R-AUDIO-L] jack on
the TV and the DVD / Blu-ray player /
Cable Box / Satellite receiver (Set-Top
Box).
DVD / Blu-ray player /
Cable Box /
Satellite receiver
(Set-Top Box)
Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable.
When using an HDMI / DVI cable connection, you must use the HDMI IN 1(DVI) jack.
or
TV Side Panel
Connections (LN26B460, LN32B460)
[QSG]BN68-02035A-00Eng.indd 9 2009-03-03 �� 10:13:27
English-10
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver
(Set-Top Box) via Component cables
TV Rear Panel
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
1
Connect a Component Cable
between the COMPONENT IN (1 or
2) [Y, PB, PR] jacks on the TV and the
COMPONENT [Y, PB, PR] jacks on the
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box).
2
Connect Audio Cables between the
COMPONENT IN (1 or 2) [R-AUDIO-L]
jacks on the TV and the AUDIO OUT
jacks on the DVD / Blu-ray player /
Cable Box / Satellite receiver (Set-Top
Box).
Component video separates the video into
Y (Luminance (brightness)), Pb (Blue) and
Pr (Red) for enhanced video quality. Be sure
to match the component video and audio
connections. For example, if connecting a
Component video cable to COMPONENT IN
1, connect the audio cable to COMPONENT
IN 1 also.
Each DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box) has a different
back panel configuration.
When connecting a DVD / Blu-ray player /
Cable Box / Satellite receiver (Set-Top Box),
match the color of the connection terminal to
the cable.
1
Component Cable
(Not supplied)
2
Audio Cable (Not supplied)
Connecting a VCR
If you have a ‘mono’ (non-stereo) VCR,
use a Y-connector (not supplied) to
connect to the right and left audio input
jacks of the TV. Alternatively, connect
the cable to the ‘R’ jack. If your VCR is
stereo, you must connect two cables.
Each VCR has a different back
panel configuration.
When connecting a VCR, match
the color of the connection
terminal to the cable.
When connecting to AV IN 1, the
color of the AV IN 1 [Y/VIDEO]
jack (Green) does not match the
color of the video cable (Yellow).
TV Rear Panel
2
Audio Cable (Not supplied)
VCR Rear Panel
1
Video Cable (Not supplied)
2
Connect Audio Cables between
the AV IN (1 or 2) [R-AUDIO-L]
jacks on the TV and the AUDIO
OUT jacks on the VCR.
1
Connect a Video Cable
between the AV IN 1 [Y/VIDEO]
or AV IN 2 [VIDEO] jack on the
TV and the VIDEO OUT jack
on the VCR.
or
or
TV Side Panel
[QSG]BN68-02035A-00Eng.indd 10 2009-03-03 �� 10:13:28
English-11
Connecting a Digital Audio System
TV Rear Panel
1
Optical Cable
(Not supplied)
Digital Audio System
1
Connect an Optical Cable
between the DIGITAL AUDIO
OUT (OPTICAL) jacks on the
TV and the Digital Audio Input
jacks on the Digital Audio
System.
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV and
adjust the volume level with the system’s volume control.
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
Each Digital Audio System has a different back panel configuration.
When the Home Theater receiver is set to On,, you can hear sound output from the TV’s Optical jack. When the TV is displaying
a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component
such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) and is connected to the TV via HDMI, only 2
channel sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel audio, connect the digital audio out
jack on DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) directly to an Amplifier or Home Theater, not the TV.
Connecting an Amplifier / DVD Home Theater
TV Rear Panel
1
Audio Cable (Not supplied)
Amplifier/DVD Home Theater
1
Connect Audio Cables between the
AUDIO OUT [R-AUDIO-L] jacks on
the TV and Audio Input jacks on the
Amplifier / DVD Home Theater.
When an audio amplifier is connected
to the AUDIO OUT [R-AUDIO-L]
jacks: Decrease the volume of the TV
and adjust the volume level with the
Amplifier’s volume control.
Each Amplifier/DVD Home Theater has
a different back panel configuration.
When connecting an Amplifier/DVD
Home Theater, match the color of the
connection terminal to the cable.
[QSG]BN68-02035A-00Eng.indd 11 2009-03-03 �� 10:13:29
English-12
Using a Video Cable
Connecting a Camcorder
1
Connect a Video Cable between
the AV IN 2 [VIDEO] jack on the TV
and the VIDEO OUT jack on the
camcorder.
Camcorder
TV Side Panel
Using an HDMI Cable
1
Connect an HDMI Cable between the
HDMI IN 3 IN jack on the TV and the
HDMI OUT jack on the camcorder.
HD Camcorder
TV Side Panel
1
HDMI Cable (Not supplied)
2
Audio Cable (Not supplied)
1
Video Cable (Not supplied
2
Connect Audio Cables between the
AV IN 2 [R-AUDIO-L] jacks on the
TV and the AUDIO OUT jacks on the
camcorder.
Each Camcorder has a different back panel configuration.
When connecting a Camcorder, match the color of the connection terminal to the cable.
[QSG]BN68-02035A-00Eng.indd 12 2009-03-03 �� 10:13:30
English-13
Connecting a PC
TV Rear Panel
1
D-Sub Cable
(Not supplied)
PC
2
PC Audio Cable
(Not supplied)
1
Connect a D-Sub Cable between
PC IN [PC] connector on the TV
and the PC output connector on
your computer.
2
Connect a PC Audio Cable between
the PC IN [AUDIO] jack on the TV
and the Audio Out jack of the sound
card on your computer.
When using an HDMI/DVI cable connection,
you must use the HDMI IN 1(DVI) terminal.
Using a D-Sub Cable
1
Connect an HDMI/DVI cable
between the HDMI IN 1(DVI) jack
on the TV and the PC output jack
on your computer.
2
Connect a 3.5 mm Stereo miniplug
/ 2RCA Cable between the DVI
AUDIO IN [R-AUDIO-L] jack on the
TV and the Audio Out jack of the
sound card on your computer.
Using an HDMI/DVI Cable
Using a D-Sub Cable
TV Rear Panel
PC
1
HDMI/DVI Cable
(Not supplied)
2
3.5 mm Stereo mini-plug/
2RCA Cable (Not supplied)
When connecting a PC, match the
color of the connection terminal to the
cable.
1
Connect an HDMI cable between the
HDMI IN (1(DVI), 2 or 3) jack on the
TV and the PC output jack on your
computer.
Each PC has a different back panel
configuration.
Using an HDMI Cable
PC
TV Rear Panel
1
HDMI/DVI Cable (Not supplied)
Using an HDMI/DVI Cable
Using an HDMI Cable
or
[QSG]BN68-02035A-00Eng.indd 13 2009-03-03 �� 10:13:32
English-14
Turning the TV On and Off
Press the POWERP button on the remote control.
You can also use the POWERP button on the TV.
1
2
With the power on, press the MENU button.
The main menu appears on the screen.
The menu’s left side has icons: Picture, Sound,
Channel, Setup, Input, Support.
Press the or ▼ button to select one of the icons.
Then press the ENTER
E
button to access the
icon’s sub-menu. Press the EXIT button to exit.
The on-screen menus disappear from the
screen after about one minute.
Storing Channels in Memory
(Automatic Method)
1
Press the MENU button to display the menu.
Press the or ▼ button to select “Channel”, then
press the ENTERE button.
2
Press the or ▼ button to select “Auto Program”,
then press the ENTER
E
button.
3
Press the or ▼ button to select the antenna
connection, then press the ENTER
E
button.
4
When selecting the Cable TV system: Press the
ENTER
E
button to start the auto program.
Press the ▲,▼, ◄ or ► to select the correct analog
signal cable system source among “STD”, “HRC”,
and “IRC”. Press the ▲ or ▼ button to select “Start”,
then press the ENTER
E
button. If you have Digital
cable TV, select the cable system signal source for
both Analog and Digital.
Viewing the Menus
5
The TV begins memorizing all available stations.
Press the EXIT button to exit.
To Stop the Auto Program Function
Press the MENU button while the Auto Program function is
being executed. You can also press the ENTER
E
button
to stop the setup.
Checking to see if Channels were Stored in Memory
Press the CH button. Only the channels stored in memory
will be selected (in order).
Selecting the antennas
Air: “Air” antenna signal.
Cable: “Cable” antenna signal.
Auto: “Air” and “Cable” antenna signals.
After all the available channels are stored, it
starts to remove scrambled channels. The Auto
program menu then reappears.
U Move E Enter m Skip
Auto Program
Select the Antenna source to memorize.
Air
Cable
Auto
Start
Start
Start
Auto Program
Selects the cable system.
Analog
Digital
HRC IRC
HRC IRCSTD
Start
STD
U Move E Enter m Skip
Auto Program
Auto Program in Progress.
Stop
Cable 38
50%
DTV Cable : 12 Cable : 32
E Enter m Skip
Auto Program
Removing scrambled channel.
Stop
DTV Cable 41
77%
DTV Cable : 16 Cable : 45
E Enter m Skip
[QSG]BN68-02035A-00Eng.indd 14 2009-03-03 �� 10:13:32
English-15
Setting the Channel List
You can delete or add a channel to display the channels
you want.
1
Press the MENU button. Press the ▲ or ▼ button to
select “Channel”, then press the ENTER
E
button.
Press the or ▼ button to select “Channel List”,
then press the ENTER
E
button.
2
Press the button to select “Added Channels”.
Press the or ▼ button to select “All Channels”.
Press the ENTER
E
button.
3
Press the or ▼ button to select a channel to
delete, then press the TOOLS button. Press the
ENTER
E
button to select “Delete”.
4
Press the or ▼ button to select a channel to add,
then press the TOOLS button. Press the ENTER
E
button and the channel is added.
Changing the Picture Standard
You can select the type of picture which best corresponds
to your viewing requirements.
1
Press the MENU button to display the menu.
Press the ENTER
E
button, to select “Picture”.
2
Press the ENTER
E
button to select “Mode”.
Press the or ▼ button to select “Dynamic”,
“Standard” or “Movie”.
Press the ENTER
E
button.
Picture Mode
Dynamic: Selects the picture for high-definition in a bright
room.
Standard: Selects the picture for the optimum display in a
normal environment.
Movie: Selects the picture for viewing movies in a dark
room.
Setting Your Favorite Channels
You can set channels you watch frequently as favorites.
1
Press the MENU button. Press the ▲ or ▼ button to
select “Channel”, then press the ENTERE button.
Press the or ▼ button to select “Channel List”,
then press the ENTERE button.
2
Press the button to select “Added Channels”.
Press the or ▼ button to select “All Channels”.
Press the ENTER
E
button.
3
Press the or ▼ button to select a channel as a
favorite channel. Press the TOOLS button.
4
Press the or ▼ button to select “Add to Favorite”,
then press the ENTERE button. The “♥” symbol
will be displayed and the channel will be set as a
favorite.
All favorite channels will be shown in the
"Favorite" menu.
2 Air
4 Air
4-2 ♥ TV #8
8 Air
13 Air
13-1 ♥ TV #3
Alice’s Adventures in Wonderland
All Channels
Delete
Add to Favorite
Timer Viewing
Channel Name Edit
Select All
Auto Program
Air
Zoom Select
T
Tools
2 Air
4 Air
4-2 ♥ TV #8
8 Air
13 Air
13-1 ♥ TV #3
Alice’s Adventures in Wonderland
All Channels
Delete
Add to Favorite
Timer Viewing
Channel Name Edit
Select All
Auto Program
Air
Zoom Select
T
Tools
Picture
Mode
:
Standard
Backlight : 7
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Dynamic
Standard
Movie
[QSG]BN68-02035A-00Eng.indd 15 2009-03-03 �� 10:13:32
English-16
Mode : Standard
Backlight : 8
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Advanced Settings
Picture Options
Picture
8Backlight
Enter Return
AdjustMove
Customizing the Picture Settings
Your television has several setting options that allow you to
control the picture quality.
1
To select the desired picture mode, follow the
“Changing the Picture Standard” instructions
numbers 1 and 2.
2
Press the or ▼ button to select “Backlight”,
“Contrast”, “Brightness”, “Sharpness”, “Color” or
“Tint(G/R)”, then press the ENTER
E
button.
3
Press the ◄ or ► button to decrease or increase
the value of a particular item. Press the EXIT button
to exit.
When you make changes to “Backlight”,
“Contrast”, “Brightness”, “Sharpness”, “Color”
or “Tint (G/R)”, the OSD will be adjusted
accordingly.
In PC mode, you can only make changes to
“Backlight”, “Contrast” and “Brightness”.
Settings can be adjusted and stored for each
external device you have connected to an input
of the TV.
The energy consumed during use can be
significantly reduced if the brightness level of
the picture is lowered, which will reduce the
overall running cost.
Picture Adjustment
Backlight: Adjusts the brightness of LCD back light.
Contrast: Adjusts the contrast level of the picture.
Brightness: Adjusts the brightness level of the picture.
Sharpness: Adjusts the edge definition of the picture.
Color: Adjusts color saturation of the picture.
Tint(G/R): Adjusts the color tint of the picture.
Setting the Screen Size
Occasionally, you may want to change the size of the
image on your screen. Your TV comes with six screen size
options, each designed to work best with specific types of
video input. Your cable box or satellite receiver may have
its own set of screen sizes as well. In general, though, you
should view the TV in 16:9 mode as much as possible.
1
To select the desired picture mode, follow the
“Changing the Picture Standard” instructions
number 1.
2
Press the or ▼ button to select “Picture Options”,
then press the ENTERE button. Press the ▲ or
▼ button to select “Size”, then press the ENTERE
button.
3
Press the or ▼ button to select the screen format
you want. Press the ENTERE button.
Press the EXIT button to exit.
16:9
: Sets the picture to 16:9 wide mode.
Zoom1: Magnifies the size of the picture on the screen.
Zoom2
: Magnifies the size of the picture more than
“Zoom1”.
Wide Fit: Enlarges the aspect ratio of the picture to fit the
entire screen.
4:3: Sets the picture to 4:3 normal mode.
Screen Fit: Use the function to see the full image without
any cutoff when HDMI (720p/1080i), Component (1080i)
or DTV (1080i) signals are input.
[QSG]BN68-02035A-00Eng.indd 16 2009-03-03 �� 10:13:33
English-17
To Select the Source
TV
AV ----
Component ----
PC ----
HDMI1/DVI ----
T Tools
Press the SOURCE button on the Remote Control
You can select the TV mode or an input source connected to the TV set. Use this button to choose an input source that you would like
to watch.
Available signal sources: TV / AV / Component / PC / HDMI1/DVI. (LN22B460)
TV / AV / Component / PC / HDMI1/DVI / HDMI2. (LN26B460, LN32B460 )
You can choose only those external devices that are connected to the TV. In the “Source List”, connected inputs will be
highlighted and sorted to the top. Inputs that are not connected will be sorted to the bottom.
TOOLS (Tools): Displays the Edit Name and Information menus.
[QSG]BN68-02035A-00Eng.indd 17 2009-03-03 �� 10:13:33
English-18
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply,
please visit Samsung.com or contact the Samsung call center at 1-800-SAMSUNG.
Problem Possible Solution
Poor picture Try another channel. / Adjust the antenna. / Check all wire connections.
Poor sound quality. Try another channel. / Adjust the antenna.
No picture or sound. Try another channel. / Press the SOURCE button. /
Make sure the TV is plugged in. / Check the antenna connections.
No sound or sound is too low at maximum
volume.
First, check the volume of units connected to your TV (digital broadcasting
receiver, DVD, cable broadcasting receiver, VCR, etc.). Then, adjust the TV
volume accordingly.
Picture rolls vertically. Check all wire connections.
There is a problem with the picture Run the Picture test in the Self diagnostic menu.
There is a problem with the sound Run the Sound test in the Self diagnostic menu.
The TV operates erratically. Unplug the TV for 30 seconds, then try operating it again.
The TV won’t turn on. Make sure the wall outlet is working.
Remote control malfunctions Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
‘Check signal cable’ message. Ensure that the signal cable is rmly connected to the PC source.
‘Not Supported Mode’ message. Check the maximum resolution and connected device’s Video frequency.
Compare these values with the data in the Display Modes.
Digital broadcasting screen problem. Please check the digital signal strength and input antenna.
The image is too light or too dark. Adjust the Brightness and Contrast. / Adjust the Fine tuning.
Black bars on the screen. Make sure the broadcast you’re receiving is High Denition (HD).
HD channels sometimes broadcast Standard Denition (SD) programming, which
can cause black bars.
Set your cable/satellite box to stretch or widescreen mode to eliminate the bars.
Picture has a Red/Green or Pink tint. Make sure the Component cables are connected to the correct jacks.
Closed Captioning not working. If you are using a Cable/Satellite box, you must set Closed Captioning on the box,
not your TV.
Snowy picture. Your cable box may need a rmware upgrade. Please contact your Cable
company.
Ghosting on picture This is sometimes caused by compatibility issues with your cable box.
Try connecting Component cables instead.
Horizontal bars appear to icker, jitter or
shimmer on the image.
Adjust the Coarse tuning and then adjust the Fine tuning.
Vertical bars appear to icker, jitter or
shimmer on the image.
Adjust the Coarse tuning and then adjust the Fine tuning.
Screen is black and power indicator light
blinks steadily.
On your computer check: Power, Signal Cable.
The TV is using its power management system.
Move the computer's mouse or press any key on the keyboard.
Image is not centered on the screen. Adjust the horizontal and vertical position.
The screen position must be adjusted on the output source (i.e. STB) with a
digital signal.
The picture appears distorted in the
corner of the screen.
If “Screen Fit” is selected with some external devices, the picture may appear
distorted in the corner of the screen. This symptom is caused by the external
devices, not TV.
The 'Resets all settings to the default
values' message appears.
This appears when you press and hold the EXIT button for a while. The product
settings are reset to the factory defaults.
[QSG]BN68-02035A-00Eng.indd 18 2009-03-03 �� 10:13:33
This page is intentionally
left blank.
[QSG]BN68-02035A-00Eng.indd 19 2009-03-03 �� 10:13:33
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comuníquese con SAMSUNG WORLDWIDE
Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de
atención al cliente de SAMSUNG.
Country
Customer Care Center
Web Site Address
CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca
Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada
Samsung Electronique Canada Inc.,
Service à la Clientèle 55 Standish Court
Mississauga, Ontario L5R 4B2 Canada
U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com
Samsung Electronics America, Inc.
105 Challenger Road
Ridgefield Park, NJ 07660-0511
BN68-02035A-00
[QSG]BN68-02035A-00Eng.indd 20 2009-03-03 �� 10:13:33
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Samsung LN32B460B2D User manual

Category
LCD TVs
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI