ALARMS TABLE
ALARM TYPE Signal Cause Cure
Door open alarm
The acoustical alarm is activated and the alarm indicator
blinks
The door has remained open for more than 2 minutes
Close the door or press the Stop Alarm to mute the acoustical
alarm.
Temperature alarm
The acoustical alarm is activated, 5 Freezer Temperature LEDs blinks
and the alarm indicator
remains on
The inside temperature is not adequate
Press the button ; the acoustical alarm stops, 5 Freezer
Temperature LEDs blinks and the alarm indicator remains on until a
temperature < -10°C is reached
Long black-out
alarm
The acoustical alarm is activated, the indicator
remains on and the
indicator
blinks.
Prolonged power failure, able to cause the inside temperature
to increase to 0°C
Press the button
; the acoustical alarm stops.
Malfunction
The acoustical alarm is activated, 3 central Fridge Temperature LEDs
blinks on the display and the alarm indicator
remains on
Product malfunction
Contact the After-sales Service and specify the number of LEDs’
blinks.
EN
1. Control panel
2. LED’s lighting
3. Fan
3a. button of fan
3b. cover of fan
4. Area shelves
5. Multi-flow cold air area
6. Bottle rack*
7. Sensor cover
8. Zero Degrees Drawer (to keep foods fresher for
longer)
9. Rating plate with commercial name
10. Fruits and vegetables crisper
11. Crisper divider*
12. Door reversibility kit
13. Door trays
14. Bottle holder*
15. Egg tray*
16. Door seals
17. Upper basket for freezing fresh food or to store
frozen food
18. Ice tray and/or cold accumulator*
19. Shelves
20. Storage baskets for frozen food items
* Available on selected models
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance,
wait at least 4-6 hours before placing food into the
appliance. When the appliance is connected to the
power supply, the display lights up and all the icons
appear on the display for approximately 1 second.
The default (factory) values of the freezer
compartment settings light-up.
HOW TO REVERSE THE DOOR SWING
- see enclosed separate instructions.
Is recommended to reverse door swing by two
persons.
Specifications, technical data and images may
vary from model to model
2
3
4
5
6
7
8
9
10
11
14
16
18
15
20
17
12
1
13
15
19
Read the Instructions for Use carefully before
using the appliance.
6
TH
SENSE FRESH CONTROL indicator
This function automatically works to ensure the
optimal conditions to preserve the stored food.
To manually deactivate the function, press the Freezer
°C and Fast Freeze buttons for 3 sec.: you will hear an
acoustical signal and “6
th
Sense Fresh Control” icon
will turn off again as confirmation that the feature has
been deactivated.
The function can be reactivated by repeating the same
procedure: you will hear an acoustical signal and
“6
th
Sense Fresh Control” icon will turn on again as
confirmation that the feature has been activated.
After a power blackout or exit from Stand-by to normal
mode, the “6
th
Sense Fresh Control” status resets to
default i.e.active.
QUICk START GUIDE
ITGB
Printed in Italy 05/14 - Whirlpool
®
Registered trademark/TM Trademark of Whirlpool group of companies - © Copyright Whirlpool Europe s.r.l. 2013. All rights reserved - http://www.whirlpool.eu
FAN
The Fan improves temperature distribution inside
the refrigerator compartment, allowing better
preservation of stored food. By default, the fan is
switched on. To switch off the FAN press the
button (3a).
Attention: Switching-off the Fan deactivate the
“6th Sense Fresh Control”.
WIFI/REMOTE CONTROL button
The WiFi presents the level of connection of the
appliance to the router. Press the button to activate/
deactivate the WiFi/ Remote Control function.
For more details – see enclosed separate instructions.
TEMPERATURE FRIDGE/FAST COOL button
TEMPERATURE FRIDGE button
To adjust the Fridge Temperature, press the Fridge
°C button. The Fridge Temperature can be adjusted
between +2°C and +8°C, as shown by the Fridge
Temperature LEDs.
FAST COOL button
Using Fast Cool function it is possible to increase the
cooling in the refrigerator compartment. The use of
this function is recommended when placing a very
high quantity of food in the refrigerator
compartment.
Press & hold for 3 sec. the Fridge °C
button to activate Fast Cool function.
When activated, the Fast Cool indication
will be displayed by the Fridge
Temperature LEDs as shown in the
beside sequence.
The function is automatically disabled
after 6 hours, or can be manually
disabled by pressing Fridge °C button.
TEMPERATURE FREEZER/ FAST FREEZE button
TEMPERATURE FREEZER button
The appliance is normally factory-set for operation at
the recommended temperature of -18°C. The internal
temperature can be adjusted between -16°C and -
24°C, proceeding as follows:
• Pressthetemperaturesettingbutton(°C).The
storage temperature can be changed by -2°C with
each pressure of the button: the value changes
cyclically between -16°C and -24°C.
FAST FREEZE button
24 hours before freezing fresh food,
press once the Fast Freeze button to
activate the Fast Freeze function.
When activated, the Fast Freeze
indication will be displayed by the
Freezer Temperature LEDs as shown in
the beside sequence.
After 24 hours place the food to be
frozen in the upper basket of freezer
compartment.
The function is automatically disabled
after 48 hours, or can be manually disabled by
pressing Freezer °C button.
5019 320 00129
BLACk OUT ALARM indicator
ON/STANDBY button
To put the product in Stand-by, press & hold the
On/Standby button for
3 seconds. All the icons turn off except
On/Stand-by icon back light to
indicate that the appliance is in Stand-by.
FREEZER
TEMPERATURE LEDs
FRIDGE
TEMPERATURE LEDs
3b
on - off
STOP ALARM /kEY LOCk button
STOP ALARM button
Press in case of alarm
kEY LOCk button
To lock the keys, press Stop Alarm button for 3 seconds until the display
shows the Key Lock indicator : an acoustic signal confirms the function has
been selected. To unlock the keys, follow the same procedure until the Key
Lock indicator switches off.
kEY LOCk indicator
1
Whirlpool WBA4398 NFC IX Program Chart
Whirlpool BSNF 8993 IX User guide
Whirlpool BSNF 8999 PB User guide
Whirlpool BSNF 8552 IX Setup and user guide
Whirlpool BSNF 9553 OX Setup and user guide
Whirlpool BSNF 8993 PB User guide
Whirlpool WBA3399 NFC IX Installation guide
Whirlpool BSNF 8533 W Setup and user guide