Cumberland Pump Side Discharge 3/4 HP Components (JEP-0750) Owner's manual

Date: 12-16-21 V2.0 PNEG-2364

Instructions

1004 East Illinois Street • Assumption, IL 62510 • 1-217-226-4421

PNEG-2364

Page 1 of 1

Printed in the USA

www.automatedproduction.com /

www.cumberlandpoultry.com

CN-400663

Pump Side Discharge 3/4 HP

Components (JEP-0750)

Pump Side Discharge 3/4 HP Components (JEP-0750)

When installing the strainer basket (3) to the pump:

1. Remove the gasket (8) and half nut (7) parts from the inside of the strainer basket (3).

2. Assemble the half nuts (7) around the outside of the strainer discharge with the screws provided.

3. Place the gasket (8) inside the union nut (7) and assemble to the front of the pump.

Figure 1 Pump Side Discharge 3/4 HP Components (JEP-0750)

NOTE: All items are not available individually.

Ref # Part # Description Qty

1-18 JEP-0750 Pump Side Discharge 3/4 HP, 208/230V, 50/60 Hz 1

1-8 60-0657 Strainer Basket, Side Discharge Pump 1

7 - 2" Female Buttress Half Nut 2

9-16 60-0656 Wet End Side Discharge 3/4 HP Impeller 1

17 1062-5032 Motor MC Pump NIDEC PSC 3/4 HP 208-230V 50/60 Hz 1

18 60-0658 Pump Union, 2" Buttress Thread x 1-1/2" Slip 2" SPG T.P. 2

N/S 1003-1463 Washer, Fender 3/16" 2