![](//vs1.manuzoid.com/store/data-gzf/b7a75e45b5d8937e2314430115aa1945/2/002210657.htmlex.zip/bg2.jpg)
GETTING STARTED WATER FLOSS
1
2Press tip rmly into unit until it clicks into place.
To remove tip, push the tip eject button.
4For rst time use, adjust the pressure
setting to the LOW(I) setting.
5Lean over sink and close lips enough to prevent
splashing while still allowing water to ow from
mouth into the sink.
Turn unit ON(I).
6Aim water at the gumline at a 90 degree
angle. Follow the gumline and pause
briey between teeth.
NEED HELP?
Quick Start Guide
With the unit turned OFF(0), connect the charging
cord to user supplied **USB charger. Plug the charger
into the wall outlet, then connect the other end
of the charging cord to the unit, and charge.
I
O
II
I
Charge Unit for
24 Hours Prior
to First Use.
CHARGE
OFF (0)
**USB charger requirements: USB Type-A, Rated Output: 5.0 VDC, 1.0 A
Call Us! 1-800-525-2774 (USA)
1-888-226-3042 (CAN)
Visit Waterpik.com/WelcomeWF
To watch a How To Video and nd additional
product support.
Caution:
Do not press tip eject button
while unit is running.
INSERT
EJECT
3Unplug charging cord from unit prior to lling
with water and during use. Li the ip top
on reservoir and ll with lukewarm water.
Rell as needed.
FILL
TO AVOID MESS: KEEP TIP IN MOUTH WHILE UNIT IS ON.
Keep unit upright
during use to
ensure continuous
water ow.
LOW
ON(I)
I
O
II
I