2. Kimex
  3. 032-1014

Kimex 032-1014 Installation guide

  • I have reviewed the instruction manual for the Kimex 032-1014 drilling template. The document provides step-by-step instructions on how to install and mount the template, including cutting the tube, fixing it, and drilling new holes. I am ready to answer your questions.
  • What is included in the package?
    What is the first step of installation?
    Is it ok to cut the cable passing hole?
LISTE / LISTING
A Gabarit de perçage / Drilling template 1
B M6 4
C Clé Allen 3mm / Allen key 3mm 1
A B C
50.8mm
78.2mm
76.5mm 25mm 25mm
80mm
DIMENSIONS
3mm
INSTRUCTIONS
3. Percer les nouveaux trous / Drill the new holes
Ne pas couper le trou
de passage des câbles
Do not cut the cable
passage hole
8mm
1. Couper le tube à la longueur désirée / Cut the tube to the desired length
2. Fixer le tube / Fix the tube
Manuel de montage
Instruction manual
032-1014
/