Gigabyte R282-NO0 User manual

R282-2O0

R282-NO0

3rd Gen. Intel® Xeon® Scalable DP Server System - 2U 24-Bay

3rd Gen. Intel® Xeon® Scalable DP Server System - 2U 24-Bay Gen4 NVMe

User Manual

Rev. 1.0

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without

prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of documentations:

 For detailed product information, carefully read the User's Manual.

For More Information

For related product specications, the latest rmware and software, and related information, please visit

our website at:

http://www.gigabyte.com

For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our

reseller portal:

http://reseller.b2b.gigabyte.com

For further information & technical assistance, please contact your GIGABYTE sales representative.

You may also message GIGABYTE server directly by email, Facebook or twitter

Email: server[email protected]

Facebook: https://www.facebook.com/gigabyteserver

Twitter: https://twitter.com/GIGABYTEServer

- 3 -

Conventions

The following conventions are used in this user's guide:

NOTE!

Gives bits and pieces of additional

information related to the current topic.

CAUTION!

Gives precautionary measures to

avoid possible hardware or software problems.

WARNING!

Alerts you to any damage that might

result from doing or not doing specic actions.

- 4 -

Server Warnings and Cautions

Before installing a server, be sure that you understand the following warnings and cautions.

WARNING!

To reduce the risk of electric shock or damage to the equipment:

• Do not disable the power cord grounding plug. The grounding plug is an important safety

feature.

• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all

times.

• Unplug the power cord from the power supply to disconnect power to the equipment.

• Do not route the power cord where it can be walked on or pinched by items placed against it.

Pay particular attention to the plug, electrical outlet, and the point where the cord extends from

the server.

WARNING!

To reduce the risk of personal injury from hot surfaces, allow the drives and the internal

system components to cool before touching them.

WARNING!

This server is equipped with high speed fans. Keep away from hazardous moving fan

blades during servicing.

CAUTION!

• Do not operate the server for long periods with the access panel open or removed. Operating

the server in this manner results in improper airow and improper cooling that can lead to

thermal damage.

• Danger of explosion if battery is incorrectly replaced.

• Replace only with the same or equivalent type recommended by the manufacturer.

• Dispose of used batteries according to the manufacturer’s instructions.

- 5 -

Electrostatic Discharge (ESD)

CAUTION!

ESD CAN DAMAGE DRIVES, BOARDS, AND OTHER PARTS. WE RECOMMEND THAT YOU

PERFORM ALL PROCEDURES AT AN ESD WORKSTATION. IF ONE IS NOT AVAILABLE,

PROVIDE SOME ESD PROTECTION BY WEARING AN ANTI-STATIC WRIST STRAP

ATTACHED TO CHASSIS GROUND -- ANY UNPAINTED METAL SURFACE -- ON YOUR

SERVER WHEN HANDLING PARTS.

Always handle boards carefully. They can be extremely sensitive to ESD. Hold boards only by

their edges without any component and pin touching. After removing a board from its protective

wrapper or from the system, place the board component side up on a grounded, static free

surface. Use a conductive foam pad if available but not the board wrapper. Do not slide board

over any surface.

System power on/off: To remove power from system, you must remove the system from rack.

Make sure the system is removed from the rack before opening the chassis, adding, or removing

any non hot-plug components.

Hazardous conditions, devices and cables: Hazardous electrical conditions may be present

on power, telephone, and communication cables. Turn off the system and discon-nect the cables

attached to the system before servicing it. Otherwise, personal injury or equipment damage can

result.

Electrostatic discharge (ESD) and ESD protection: ESD can damage drives, boards, and

other parts. We recommend that you perform all procedures in this chapter only at an ESD

workstation. If one is not available, provide some ESD protection by wearing an antistatic wrist

strap attached to chassis ground (any unpainted metal surface on the server) when handling

parts.

ESD and handling boards: Always handle boards carefully. They can be extremely sensi-tive to

electrostatic discharge (ESD). Hold boards only by their edges. After removing a board from its

protective wrapper or from the system, place the board component side up on a grounded, static

free surface. Use a conductive foam pad if available but not the board wrapper. Do not slide

board over any surface.

Installing or removing jumpers: A jumper is a small plastic encased conductor that slips over

two jumper pins. Some jumpers have a small tab on top that can be gripped with n-gertips or

with a pair of ne needle nosed pliers. If the jumpers do not have such a tab, take care when

using needle nosed pliers to remove or install a jumper; grip the narrow sides of the jumper with

the

- 6 -

pliers, never the wide sides. Gripping the wide sides can dam-age the contacts inside the jumper,

causing intermittent problems with the function con-trolled by that jumper. Take care to grip with,

but not squeeze, the pliers or other tool used to remove a jumper, or the pins on the board may

bend or break.

CAUTION!

Risk of explosion if battery is replaced incorrectly or with an incorrect type. Replace the battery

only with the same or equivalent type recommended by the manufacturer. Dispose of used

batteries according to the manufacturer’s instructions.

- 7 -

Table of Contents

Chapter 1 Hardware Installation ........................................................... 11

1-1 Installation Precautions ............................................................11

1-2 ProductSpecications ............................................................. 12

1-3 System Block Diagram ............................................................ 18

Chapter 2 System Appearance.............................................................19

2-1 Front View ............................................................................... 19

2-1-1 R282-2O0 ...................................................................................... 19

2-1-2 R282-NO0 ...................................................................................... 19

2-2 Rear View ................................................................................ 20

2-3 Front Panel LED and Buttons .................................................. 21

2-4 Rear System LAN LEDs .......................................................... 23

2-5 Hard Disk Drive LEDs .............................................................. 24

2-6 Power Supply Unit LED ........................................................... 25

Chapter 3 System Hardware Installation ..............................................26

3-1 Removing Chassis Cover ........................................................ 27

3-2 Removing and Installing the Fan Duct ..................................... 28

3-3 Installing the CPU and Heat Sink ............................................ 29

Follow these instructions to install the CPU: .................................... 29

3-4 nstalling the Memory ............................................................... 31

3-4-1 EightChannelMemoryConguration ............................................ 31

3-4-2 Installing a Memory ....................................................................... 32

3-4-3 DIMM Population Table .................................................................. 32

3-4-4 Processor and Memory Module Matrix Table ................................. 33

3-4-5 Intel OptaneTMPMem200SeriesMatrixConguration ................. 34

3-4-6 Intel Optane DCPMM DIMM Population Rule ................................ 35

3-5 nstalling the PCI Expansion Card ............................................ 36

3-6 Installing the Hard Disk Drive .................................................. 37

3-7 Replacing the FAN Assemblly ................................................. 38

3-8 Replacing the Power Supply ................................................... 39

3-9 Cable Routing .......................................................................... 40

3-9-1 Cable Routing for R282-2O0 ......................................................... 40

3-9-2 Cable Routing for R282-NO0 ......................................................... 46

Chapter 4 Motherboard Components ...................................................54

- 8 -

4-1 Motherboard Components ....................................................... 54

4-2 Jumper Setting ....................................................................... 56

4-3 Backplane Board Storage Connector ..................................... 57

4-2-1 CBP20O7 ....................................................................................... 57

4-3-1 CBP2022 ........................................................................................ 58

Chapter 5 BIOS Setup .......................................................................... 59

5-1 The Main Menu ........................................................................ 61

5-2 Advanced Menu ....................................................................... 64

5-2-1 Trusted Computing ......................................................................... 65

5-2-2 Serial Port Console Redirection ..................................................... 66

5-2-3 SIOConguration .......................................................................... 70

5-2-4 PCI Subsystem Settings ................................................................ 71

5-2-5 USBConguration ......................................................................... 72

5-2-6 NetworkStackConguration ......................................................... 73

5-2-7 PostReportConguration .............................................................. 74

5-2-8 NVMeConguration ....................................................................... 75

5-2-9 ChipsetConguration .................................................................... 76

5-2-10TlsAuthConguration .................................................................... 77

5-2-11 iSCSIConguration ....................................................................... 78

5-2-12 Intel(R) i350 Gigabit Network Connection ...................................... 79

5-2-13VLANConguration ....................................................................... 81

5-2-14 Driver Health .................................................................................. 82

5-3 Chipset Menu .......................................................................... 83

5-3-1 ProcessorConguration ................................................................ 84

5-3-2 CommonRefCodeConguration ................................................... 87

5-3-3 UPIConguration ........................................................................... 88

5-3-4 MemoryConguration .................................................................... 89

5-3-5 IIOConguration ............................................................................ 92

5-3-6 AdvancedPowerManagementConguration ............................... 94

5-3-7 PCHConguration ......................................................................... 96

5-3-8 MiscellaneousConguration .......................................................... 98

5-3-9 ServerMEConguration ................................................................ 99

5-3-10 Runtime Error Logging Settings ................................................... 100

5-3-11 Power Policy ................................................................................ 102

5-4 Server Management Menu .................................................... 104

5-4-1 System Event Log ........................................................................ 106

5-4-2 View FRU Information .................................................................. 107

5-4-3 BMCVLANConguration ............................................................ 108

5-4-4 BMCNetworkConguration ........................................................ 109

- 9 -

5-4-5 IPv6BMCNetworkConguration .................................................110

5-5 Security Menu ......................................................................... 111

5-5-1 Secure Boot .................................................................................112

5-6 Boot Menu ..............................................................................115

5-7 Save & Exit Menu ...................................................................117

5-8 BIOS POST Beep code (AMI standard) .................................119

5-8-1 PEI Beep Codes ...........................................................................119

5-8-2 DXE Beep Codes ..........................................................................119

- 10 -

This page intentionally left blank

- 11 -

Hardware Installation

1-1 Installation Precautions

The motherboard/system contain numerous delicate electronic circuits and components which

can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully

read the service guide and follow these procedures:

• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

• Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

• When connecting hardware components to the internal connectors on the motherboard,

make sure they are connected tightly and securely.

• When handling the motherboard, avoid touching any metal leads or connectors.

• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist

strap, keep your hands dry and rst touch a metal object to eliminate static electricity.

•

Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

• Before unplugging the power supply cable from the motherboard, make sure the power

supply has been turned off.

• Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

• Before using the product, please verify that all cables and power connectors of your

hardware components are connected.

• To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

• Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

• Do not place the computer system on an uneven surface

.

• Do not place the computer system in a high-temperature environment.

• Turning on the computer power during the installation process can lead to damage to

system components as well as physical harm to the user.

• If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certied computer technician.

Chapter 1 Hardware Installation

- 12 -

Hardware Installation

1-2 ProductSpecications

CPU 3rd Generation Intel® Xeon® Scalable Processors

Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon®

Silver Processor

10nm technology, CPU TDP up to 270W

NOTE: If only 1 CPU is installed, some PCIe or memory functions might be

unavailable.

Socket 2 x LGA 4189

Socket P+

Chipset Intel® C621A Express Chipset

Memory 32 x DIMM slots

DDR4 memory supported only

8-channel memory architecture per processor

RDIMM modules up to 64GB supported

LRDIMM modules up to 128GB supported

3DS RDIMM/LRDIMM modules up to 256GB supported

1.2V modules: 3200/2933/2666 MHz

LAN 2 x 1Gb/s LAN ports (Intel® I350-AM2)

1 x 10/100/1000 management LAN

Expansion Slot R282-2O0

Riser Card CRS2033:

1 x PCIe x16 slot (Gen4 x16), Full height half-length

2 x PCIe x8 slots (Gen4 x8), Full height half-length

Riser Card CRS2137:

1 x PCIe x16 slot (Gen4 x16 o x8), Full height half-length

1 x PCIe x8 slots (Gen4 x0 or x8), Full height half-length

1 x PCIe x16 slot (Gen4 x16 or x8), shared with OCP 2.0, Full height half-length

Riser Card CRS2027:

2 x PCIe x8 slots (Gen4 x8), Low prole half-length

1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth from CPU_0

Supported NCSI function

1 x OCP 2.0 mezzanine slot with PCIe Gen3 x8 bandwidth from CPU_1

Supported NCSI function

- 13 -

Hardware Installation

Expansion Slot R282-NO0

Riser Card CRS2026:

1 x PCIe x16 slot (Gen4 x16), Full height half-length

1 x PCIe x16 slot (Gen4 x16), Full height half-length, occupied by CNV3134, 4

x NVMe PCIe HBA

Riser Card CRS2026:

1 x PCIe x16 slot (Gen4 x16), Full height half-length

1 x PCIe x16 slot (Gen4 x16), Full height half-length, shared with OCP 2.0,

occupied by CNV3134, 4 x NVMe PCIe HBA

Riser Card CRS2015:

1 x PCIe x16 slot (Gen4 x16), Low prole half-length, occupied by CNV3134,

4 x NVMe PCIe HBA

1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth from CPU_0,

occupied by CNV9134, 4 x NVMe PCIe HBA

Supported NCSI function

1 x OCP 2.0 mezzanine slot with PCIe Gen3 x8 bandwidth from CPU_1 (

Disabled)

Supported NCSI function

Video Integrated in Aspeed® AST2600

2D Video Graphic Adapter with PCIe bus interface

1920x1200@60Hz 32bpp, DDR4 SDRAM

Storage R282-2O0

Front side: 24 x 2.5" SATA/SAS hot-swappable HDD/SSD bays

Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays ( Connected via

SAS Expander)

SAS card is required to enable drive bays

Broadcom SAS35x36R expander

Bandwidth: SATA 6Gb/s or SAS 12Gb/s per port

Default conguration supports:

Non-supported SATA/SAS drives without SAS card

Suggested 12Gb/s SAS cards:

CRA4448

R282-NO0

24 x 2.5" Gen4 NVMe hot-swappable HDD/SSD bays

2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays in rear side

SAS card is required for SAS devices support

- 14 -

Hardware Installation

SAS Supported via add-on SAS Card

Internal

Connectors

2 x CPU fan headers

1 x USB 3.0 header

1 x TPM header

1 x VROC connector

1 x Front panel header

1 x HDD back plane board header

1 x IPMB connector

1 x Clear CMOS jumper

1 x BIOS recovery jumper

Front Panel

LED/Buttons

2 x USB 3.0

1 x Power button with LED

1 x ID button with LED

1 x Reset button

1 x NMI button

1 x System status LED

1 x HDD activity LED

2 x LAN activity LEDs

Rear Panel I/O 2 x USB 3.0

1 x VGA

1 x COM (RJ45 type)

2 x RJ45

1 x MLAN

1 x ID button with LED

Backplane I/O 2 x USB 3.0

1 x VGA

1 x COM (RJ45 type)

2 x RJ45

1 x MLAN

1 x ID button with LED

TPM 1 x TPM header with SPI interface

Optional TPM2.0 kit: CTM010

- 15 -

Hardware Installation

Power Supply R282-2O0

2 x 1600W redundant PSUs

80 PLUS Platinum

AC Input:

- 100-120V~/ 12A, 50-60Hz

- 200-240V~/ 10.0A, 50-60Hz

DC Input:

240Vdc, 10A

DC Output:

- Max 1000W/ 100-120V~

+12V/ 81.5A

+12Vsb/ 2.5A

- Max 1600W at 200-240V or 240Vdc Input

+12V/ 133A

+12Vsb/ 2.5A

R282-NO0

2 x 1600W redundant PSUs

80 PLUS Platinum

AC Input:

- 100-120V~/ 12A, 50-60Hz

- 200-240V~/ 10.0A, 50-60Hz

DC Input:

240Vdc, 10A

DC Output:

- Max 1000W/ 100-120V~

+12V/ 81.5A

+12Vsb/ 2.5A

- Max 1600W at 200-240V or 240Vdc Input

+12V/ 133A

+12Vsb/ 2.5A

Environment

Ambient

Temperature

Relative

Humidity

Operating temperature: 10°C to 35°C

Non-operating temperature: -40°C to 60°C

Operating humidity: 8-80% (non-condensing)

Non-operating humidity: 20%-95% (non-condensing)

- 16 -

Hardware Installation

System

Management

R282-2O0/R282-NO0

Aspeed® AST2600 management controller

GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

Dashboard

JAVA Based Serial Over LAN

HTML5 KVM

Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)

Sensor Reading History Data

FRU Information

SEL Log in Linear Storage / Circular Storage Policy

Hardware Inventory

Fan Prole

System Firewall

Power Consumption

Power Control

LDAP / AD / RADIUS Support

Backup & Restore Conguration

Remote BIOS/BMC/CPLD Update

Event Log Filter

User Management

Media Redirection Settings

PAM Order Settings

SSL Settings

SMTP Settings

System

Dimension

2U

438mm (W) x 87.5mm (H) x 730mm (D)

* We reserves the right to make any changes to the product specications and product-related information without prior

notice.

- 17 -

Hardware Installation

This page intentionally left blank

- 18 -

Hardware Installation

1-3 System Block Diagram

8-Channel DDR4, 16 x DIMMs

Speed up to 3200 MHz

8-Channel DDR4, 16 x DIMMs

Speed up to 3200 MHz

DMI3 x 4

PCIe3.0

x

1

PCIe3.0

x

1

eSPI

SPI

2 x USB 2.0

SPI Flash

64 MB

SPI Flash

64 MB

3 x SlimSAS 4i

2 x SSATAIII

4 x SSATAIII

2 x SATA DOM

8 x SATAIII

2 x USB 3.0

(Internal)

2 x USB 3.0

(rear)

USB 3.0 x2

TPM

VGA

COM

ASPEED

AST2600

BMC

MLAN

MAC

PCIe4.0

x

16

PCIe4.0

x

32

2 x PCIe 4.0 x8 slots

PCIe 4.0 x16 slot

PCIe 4.0 x8 slot

PCIe 4.0 x0 or x8 slot

PCIe 4.0 x16 or x8 slot

PCIe4.0

x

16

PCIe4.0

x

24

PCIe4.0

x

8

SPI Flash

64 MB

SPI Flash

64 MB

Dual ROM

(ROT Option)

Dual ROM

(ROT Option)

3 x UPI 11.2GT/s (ICX)

PCIe4.0

x

16

Switch

NCSI

OCP 3.0 mezzanine

OCP 2.0 mezzanine

PCH

Lewisburg-R

Intel C621A

2 x SlimSAS 8i

PCIe4.0

x

16

2 x SlimSAS 8i

Switch

Intel

i350-AM2

10/100/1G

PHY

Ice Lake-SP

LGA4189 (Socket P+)

CPU0

Ice Lake-SP

LGA4189 (Socket P+)

CPU1

2 x 1GbE LAN

Riser CRS2033

Riser CRS2137

Riser CRS2027

Switch

8-Channel DDR4, 16 x DIMMs

Speed up to 3200 MHz

8-Channel DDR4, 16 x DIMMs

Speed up to 3200 MHz

DMI3 x 4

PCIe3.0

x

1

PCIe3.0

x

1

eSPI

SPI

2 x USB 2.0

SPI Flash

64 MB

SPI Flash

64 MB

3 x SlimSAS 4i

2 x SSATAIII

4 x SSATAIII

2 x SATA DOM

8 x SATAIII

2 x USB 3.0

(Internal)

2 x USB 3.0

(rear)

USB 3.0 x2

TPM

VGA

COM

ASPEED

AST2600

BMC

MLAN

MAC

PCIe4.0

x

16

PCIe4.0

x

32

2 x PCIe 4.0 x16 slots

2 x PCIe 4.0 x16 slots PCIe 4.0 x16 slot

PCIe4.0

x

16

PCIe4.0

x

24

PCIe4.0

x

8

SPI Flash

64 MB

SPI Flash

64 MB

Dual ROM

(ROT Option)

Dual ROM

(ROT Option)

3 x UPI 11.2GT/s (ICX)

PCIe4.0

x

16

Switch

NCSI

OCP 3.0 mezzanine

OCP 2.0 mezzanine

PCH

Lewisburg-R

Intel C621A

2 x SlimSAS 8i

PCIe4.0

x

16

2 x SlimSAS 8i

Switch

Intel

i350-AM2

10/100/1G

PHY

Ice Lake-SP

LGA4189 (Socket P+)

CPU0

Ice Lake-SP

LGA4189 (Socket P+)

CPU1

2 x 1GbE LAN

Riser CRS2026

Riser CRS2015

CNV3134

U.2 U.2 U.2 U.2

CNV3134

U.2 U.2 U.2 U.2

CNVO134

U.2 U.2 U.2 U.2

CNV3134

U.2 U.2 U.2 U.2

R282-2O0

R282-NO0

- 19 -

System Appearance

Chapter 2 System Appearance

2-1 Front View

No. Decription

1. Front Panel LEDs and buttons

2. Front USB 3.0 ports

NOTE! The Green Latch Supports NVMe

• Please Go to Chapter 2-3 Front Panel LED and Buttons for detail description of function LEDs.

HDD#0

HDD#1

HDD#2

HDD#3

HDD#4

HDD#5

HDD#6

HDD#7

HDD#8

HDD#9

HDD#10

HDD#11

HDD#12

HDD#13

HDD#14

HDD#15

HDD#16

HDD#17

HDD#18

HDD#19

HDD#20

HDD#21

HDD#22

HDD#23

2

1

HDD#0

HDD#1

HDD#2

HDD#3

HDD#4

HDD#5

HDD#6

HDD#7

HDD#8

HDD#9

HDD#10

HDD#11

HDD#12

HDD#13

HDD#14

HDD#15

HDD#16

HDD#17

HDD#18

HDD#19

HDD#20

HDD#21

HDD#22

HDD#23

2

1

2-1-1 R282-2O0

2-1-2 R282-NO0

- 20 -

System Appearance

2-2 Rear View

No. Decription

1. Mezzanine Slot (Option/OCP 3.0 Card/SFF Type)

2. ID Button with LED

3. Server management LAN port

4. 1GbE LAN port x 2

5. USB 3.0 port x 2

6. Mezzanine Slot (Option/OCP 2.0 Card)

7. VGA port

8. Low-Prole PCIe Card Slot

9. Full height

10. Full height

7

8910

2

31456

Page is loading ...

Gigabyte R282-NO0 User manual

This manual is also suitable for

Gigabyte R282-NO0 User manual

Related papers

Other documents