Baxton Studio RH339P-Walnut-5PC, RH339P-Dark Brown-5PC, RH339P-Dark Brown/Walnut-5PC, RH339P-Sand/Dark Brown-5PC Assembly Instructions

  • I've reviewed the assembly instructions for the 339P chair. The document provides detailed guidance including parts list, step by step instructions with diagrams, and caution notes to ensure smooth and correct assembly process, as well as lists hardware required to assemble, I am ready to answer your questions about assembling this product.
  • What should I do before starting assembly?
    What does 'do not fully tighten' mean?
    What should I do to avoid damaging threads?
    How many pieces of the CSK screw M4 x 38MM (hardware number 2) are there?
ASSEMBLY INSTRUCTION MODEL : 339P
Read this instruction carefully. Remove all wrapping material, staples and straps from the carton.
See hardware and furniture part list
For guidance. Be sure you have all wooden furniture parts on a clean and flat soft surface, such
as a carpet or rug, to prevent from being scratched.Follow the figure to start assembling.
CAUTION :
1. Do not FULLY - TIGHTEN the nut or screw untill all is ready to assemble.
2. Do not OVER - TIGHTEN the nut or screw to avoid causing damages to the thread.
3. Keep all hardware part out reach of children.
DESRIPTIONNO QTY
1JCBC SCREW M6 X 50MM 6 PCS
2
3
4
SPRNG WASHER M6 6 PCS
6M4 ALLEN KEY 1 PC
COMPELETE ASSEMBLE
PART LISTNO QTY
ABACK REST
BFRONT LEG
CSIDE RAIL 2 PCS
DWOODEN SEAT WITH SCOOP 1 PC
1 PC
1 PC
ESRETCHER 2 PCS
CSK SCREW M4 x 38MM 4 PCS
WOOD DOWEL Ø8 x 30MM 4 PCS
5
CSK SCREW M4 x 30MM 3 PCS
E
B
STEP 1
Attached C to B according to the hole
and tighten it using hardware number
1,4,5 and 6 .
4
5
1
C
6B
C
C
STEP 2
Align E with B accordingly.
B
E
E
AC
6
1
5
STEP 3
Proceed with combine the whole part
from STEP1 and STEP2 to A . Tighten
the part of C and A using hardware
number 1,5 and 6 .
A
C
2
X4pcs
STEP 4
Fully-tighten E that stuck to A and B with
hardware number 2 .
STEP 5
Stick D to the whole assemble part and
fully-tighten it with hardware number 3 .
3
X3pcs
AB
E
E
A
B
C
C
D
STEP 5
Read this instruction carefully. Remove all wrapping material, staples and straps from the carton. See hardware and furniture part list
For guidance. Be sure you have all wooden furniture parts on a clean and flat soft surface, such as a carpet or rug, to prevent from being
scratched.Follow the figure to start assembling.
ATABLE TOP
BTABLE LEG 4 PCS
1 PC 1
2
3
4
8 PCS
FLAT WASHER 5 / 16"
SPRING WASHER 5 / 16"
SPANNER 12.8 1 PC
8 PCS
8 PCS
B
A
2
3
1
4
HEX.COM SCREW 5 / 16" X 80MM
B
B
A
B
B
CAUTION :
1. Do not FULLY - TIGHTEN the nut or screw until all is ready to assemble.
2. Do not OVER - TIGHTEN the nut or screw to avoid causing damage to the thread.
3. Keep all hardware part out of reach of children at all times.
900 x 900MM
/