KitchenAid KICU465S User manual

Brand: KitchenAid

Model: KICU465S

Type: User manual

KitchenAid KICU465S is a 36" Island Range Hood designed for both vented and non-vented (recirculating) installations. It requires a 120-volt, 60-Hz, AC-only, 15-amp, fused electrical circuit. The hood's chimneys are adjustable to meet varying ceiling or soffit heights, with a minimum distance of 24" and a suggested maximum distance of 30" between the bottom of the hood and the cooking surface. For vented installations, the chimney can be adjusted for ceilings between 7’ 7-1/8” (2.31 m) and 9’ 1-3/4” (2.

Example Vent System

90º elbow

6' (1.8 m)

2’

(0.6 m)

Wall cap

PRODUCT MODEL NUMBERS PRODUCT DIMENSIONS

INSTALLATION CLEARANCES

VENTING REQUIREMENTS

KICU465S

Electrical: 120-volt, 60-Hz, AC-only, 15-amp,

fused electrical curcuit is required. Use copper

wire only.

36" Island Range Hood

Because Whirlpool Corporation policy includes a continuous commitment to improve

our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Instructions packed with product. Specifications subject to change without notice.

Ref. W10094880C

06-24-08

Maximum length = 35' (10.7 m)

1 — 90° elbow = 5' (1.5 m)

8' (2.4 m) straight = 8' (2.4 m)

1 — wall cap = 0' (0 m)

system length = 13' (3.9 m)

Note: Flexible vent is not recommended. Flexible vent

creates back pressure and air turbulence that greatly

reduce performance.

Vent system can terminate either through the roof or

wall. To vent through a wall, a 90° elbow is needed.

Non-vented (recirculating) installations

Vented installations

Note: The hood chimneys are adjustable and

designed to meet varying ceiling or soffit heights

depending on the distance “X” between the bottom

of the hood and the cooking surface. For higher

ceilings, a 40” (101.6 cm) Chimney Extension Kit

Part Number 8212698 (Black), Kit Part Number

8212696 (Stainless Steel) or Kit Part Number

8212697 (White) is available. See your dealer. The

chimney extension replaces the upper chimney

shipped with the hood.

Important:

■ Minimum distance “X”: 24” (61.0 cm)

Suggested maximum distance

“X”: 30” (76.2 cm)

■ For vented installations, the chimney can be

adjusted for ceilings between 7’ 7-1/8”

(2.31 m) and 9’ 1-3/4” (2.79 m).

■ For non-vented (recirculating) installations, the

chimney can be adjusted for ceilings between 8’

3-3/8” (2.52 m) and 9’ 5-1/4” (2.88 m).

Important:

As hood height (distance X) increases, hood's

venting effectiveness decreases.

13³⁄₄"

(34.9 cm)

12¹⁄₁₆"

(30.6 cm)

26³⁄₈"

(65.1 cm)

min.

38¹⁄₂"

(97.8 cm)

max.

27¹⁄₂"

(69.9 cm)

23⁵⁄₈"

(60.0 cm)

3¹⁵⁄₁₆"

(10.0 cm)

36" (91.4 cm)

³⁄₄"

(34.9 cm)

12¹⁄₁₆"

(30.6 cm)

32"

(81.3 cm)

min.

39"

(99.0 cm)

max.

23⁵⁄₈"

(60.0 cm)

3¹⁄₂"

(8.9 cm)

12¹⁄₂"

(31.8 cm)

(12.7 cm)

3¹⁵⁄₁₆"

(10.0 cm)

See NOTE

36" (91.4 cm)

Countertop

height

Roof Venting Wall Venting

A. Roof cap

B. 6" (15.2 cm) round vent

A. Wall cap

B. 6" (15.2 cm) round vent

6" (15.2 cm) roundVent piece

45° elbow 2.5'

(0.8 m)

90° elbow 5.0'

(1.5 m)

To calculate the length of the system you need, add the

equivalent feet (meters) for each vent piece used in the

system

Maximum equivalent vent length is 35' (10.7 m).

KitchenAid KICU465S User manual

KitchenAid KICU465S User manual

KitchenAid KICU465S User manual

Related papers

Other documents