Lightolier MHT4RF User manual

Category
Wire connectors
Type
User manual

Lightolier MHT4RF is a track lighting system that uses T-4 single-ended ceramic metal halide lamps. It has a textured anodized and sealed aluminum flood reflector. The MHT4RF is suitable for use with Lightolier 8304 and 8314 luminaires. It has a 36° x 36° beam spread and a CBCP of 2,356 for 20W T4 CMH lamps. The MHT4RF can be aimed at 0°, 30°, or 45° vertically and horizontally. It has a rated life of 7,500 to 9,000 hours. The MHT4RF is ideal for use in retail, hospitality, and commercial applications.

Lightolier MHT4RF is a track lighting system that uses T-4 single-ended ceramic metal halide lamps. It has a textured anodized and sealed aluminum flood reflector. The MHT4RF is suitable for use with Lightolier 8304 and 8314 luminaires. It has a 36° x 36° beam spread and a CBCP of 2,356 for 20W T4 CMH lamps. The MHT4RF can be aimed at 0°, 30°, or 45° vertically and horizontally. It has a rated life of 7,500 to 9,000 hours. The MHT4RF is ideal for use in retail, hospitality, and commercial applications.

ø 3 1/2"
(89mm)
2 5/16"
(59mm)
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 (508) 679-8131 Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2003 Genlyte Thomas Group LLC (Lightolier Division) A0403
Lytespan
®
Track Lighting System MHT4RF
Page 1 of 2 Metal Halide T-4 Reflector Flood
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Ordering Information
Catalog No. Finishes Lamps For Use With Luminaires
MHT4RF Anodized T-4 Single Ended Ceramic Metal Halide 8304 and 8314
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Features
1. Flood Reflector: Aluminum, textured, anodized and sealed.
Finish
Textured Anodized and Sealed.
Labels
UL, cUL
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 (508) 679-8131 Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2003 Genlyte Thomas Group LLC (Lightolier Division) A0403
Job Information Type:
Lytespan
®
Track Lighting System MHT4RF
Page 2 of 2 Metal Halide T-4 Reflector Flood
AIMING ANGLE: 30° Horizontal 30° Vertical 45° Vertical
L Beam Length D Distance
W Beam Width A Aiming Angle
C Distance to center beam FC Footcandles
L and W are the outer points where the candle power drops
to 50% of the maximum. FC are the initial footcandles at the
center of the beam.
Lamp data shown is typical. Consult lamp manufacturers for
availability and performance.
6 65 3.9 3.9
8 37 5.2 5.2
10 24 6.5 6.5
12 16 7.8 7.8
AIMING ANGLE: 0° Horizontal Aiming 30° Horizontal Aiming 30° Vertical Aiming 45° Vertical Aiming
DFC L W
DC FC L W
DC FC L W DC FC L W
Beam Spread
CBCP
Rated
(To 50% CBCP) Life (Hrs.)
6 3.5 43 5.4 4.5
8 4.6 24 7.2 6.0
10 5.8 15 9.0 7.5
12 6.9 11 10.8 9.0
2 3.5 74 7.6 2.6
3 5.2 33 11.4 3.9
4 6.9 18 15.2 5.2
5 8.7 12 19.0 6.5
3 3.0 93 4.4 2.8
4 4.0 52 5.8 3.7
5 5.0 33 7.3 4.6
6 6.0 23 8.7 5.5
20W T4 CMH 2,356 7,500
to
36° X 36° 9,000
6 108 4.4 4.4
8 61 5.8 5.8
10 39 7.3 7.3
12 27 8.7 8.7
DFC L W
DC FC L W
DC FC L W DC FC L W
Beam Spread
CBCP
Rated
(To 50% CBCP) Life (Hrs.)
6 3.5 70 6.1 5.0
8 4.6 39 8.1 6.7
10 5.8 25 10.2 8.4
12 6.9 17 12.2 10.1
2 3.5 121 9.7 2.9
3 5.2 54 14.5 4.4
4 6.9 30 19.3 5.8
5 8.7 19 24.2 7.3
3 3.0 152 5.0 3.1
4 4.0 86 6.7 4.1
5 5.0 55 8.4 5.1
6 6.0 38 10.1 6.2
39W T4 CMH 3,877 9,000
to
40° X 40° 10,000
6 181 4.6 4.6
8 102 6.1 6.1
10 65 7.7 7.7
12 45 9.2 9.2
DFC L W
DC FC L W
DC FC L W DC FC L W
Beam Spread
CBCP
Rated
(To 50% CBCP) Life (Hrs.)
6 3.5 118 6.5 5.3
8 4.6 66 8.6 7.1
10 5.8 42 10.8 8.9
12 6.9 29 12.9 10.6
2 3.5 204 11.0 3.1
3 5.2 90 16.5 4.6
14 6.9 51 22.0 6.1
5 8.7 33 27.5 7.7
3 3.0 256 5.4 3.3
4 4.0 144 7.2 4.3
5 5.0 92 9.0 5.4
6 6.0 64 10.8 6.5
70W T4 CMH 6,514 6,000
to
42° X 42° 9,000
  • Page 1 1
  • Page 2 2

Lightolier MHT4RF User manual

Category
Wire connectors
Type
User manual

Lightolier MHT4RF is a track lighting system that uses T-4 single-ended ceramic metal halide lamps. It has a textured anodized and sealed aluminum flood reflector. The MHT4RF is suitable for use with Lightolier 8304 and 8314 luminaires. It has a 36° x 36° beam spread and a CBCP of 2,356 for 20W T4 CMH lamps. The MHT4RF can be aimed at 0°, 30°, or 45° vertically and horizontally. It has a rated life of 7,500 to 9,000 hours. The MHT4RF is ideal for use in retail, hospitality, and commercial applications.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI