ZANUSSI
P R O F E S S I O N A L
DOUBLE BOWL SINKS ON LEGS
2100/2800 mm
Left hand drainer l
Right hand drainer l
Drainers -n. 1 1 2 2
Net weight - kg. 65 65 70 75
Bowl dimensions (wxdxh) - mm 600x500xH300 600x500xH300 600x500xH300 600x500xH300
Bowls - n. 2 2 2 2
radius R=8 R=8 R=8 R=8
depth 13 13 13 13
height 100 100 100 100
Upstand dimensions - mm
Worktop thickness - mm 50 50 50 50
height 1000 1000 1000 1000
depth 700 700 700 700
width 2100 2100 2400 2800
External dimensions - mm
LG2126DXP
132360
LG2126SXP
132361
LG2426P
132364
LG2826P
132365
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
The range consists of 4 sinks, with
all-round apron panelling, 2100,
2400 or 2800 mm in length, and with
a single bowl.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� Worktop in 10/10, 304 AISI
stainless steel, 40 mm in thickness
and with overflow rim along the top.
� Sink bowl in 304 AISI stainless
steel, supplied as standard with an
overflow pipe and a drain hole.
� Rear splashback with 8 mm
rounded corner, 100 mm in height
and 13 mm deep.
� Square section legs with 1"
height-adjustable (40 mm) feet in
304 AISI stainless steel to guarantee
perfect alignment with other food
preparation units.
� Quick and easy installation as the
sink tops are slotted onto the legs
and the taps are easily installed from
the rear.
� Accessories available on request:
lower shelf, tap unit, false bowl
bottom, overflow filter, single or
double syphons.
� A 40 mm thick lower shelf can be
easily slotted into position, 200 mm
from the floor, without using tools.
The shelves are supplied in solid
versions as standard, with perforated
shelves supplied on request.
� All models comply with the more
strict international standards as far
as hygiene and cleanability are
concerned.
AAED2 2009-06-19 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
WALL MIXER TAP WITH SWIVEL SPOUT 3/4" 855310 855310 855310 855310
WALL MIX.TAP+SPRAY+SPOUT+SH.LEVER+THERM 855307 855307 855307 855307
SINGLE PLASTIC SYPHON 2" 895313 895313 895313 895313
SINGLE BRASS SYPHON 2" 895314 895314 895314 895314
PRE-WASH SPRAY UNIT,SINGLE HOLE 855315 855315 855315 855315
OVERFLOW FILTER FOR 600X500 MM BOWL 895135 895135 895135 895135
MIXER TAP+SPRAY ARM+SPOUT-3/4" SING.HOLE 855329 855329 855329 855329
MIXER TAP(PREMIUM)+SPRAY ARM-3/4" HOLE 855326 855326 855326 855326
MIXER TAP(INFRARED)+SPOUT 3/4"SING.HOLE 855325 855325 855325 855325
MIXER TAP WITH SPOUT 3/4" SINGLE HOLE 855319 855319 855319 855319
MIXER TAP W/FOOT PEDAL FOR SINKS ON LEGS 855317 855317 855317 855317
MAXIREEL-RETRACTABLE HOSE SPRAY UNIT 6M 855327 855327 855327 855327
MAXIREEL-RETRACTABLE HOSE SPRAY UNIT 15M 855321 855321 855321 855321
MAXIREEL-RETRACTABLE HOSE SPRAY UNIT 10M 855320 855320 855320 855320
LOWER SHELF FOR 2800 MM SINK 855358
LOWER SHELF FOR 2400 MM SINK 855354
LOWER SHELF FOR 2100 MM SINK 855351 855351
FOOT OP.MIXER TAP(HOT+COLD)+SPOUT-3/4" 855328 855328 855328 855328
FALSE BOTTOM FOR R/H 600X500 MM BOWL 895100 895100 895100 895100
FALSE BOTTOM FOR L/H 600X500 MM BOWL 895110 895110 895110 895110
ELBOW OP.TAP+SPRAY ARM+SPOUT-3/4" HOLE 855324 855324 855324 855324
ELBOW OP.MIXER TAP+SPOUT-3/4"SINGLE HOLE 855322 855322 855322 855322
DOUBLE PLASTIC DRAIN SYPHON 2" 850022 850022 850022 850022
LG2126DXP
132360
LG2126SXP
132361
LG2426P
132364
LG2826P
132365
ACCESSORIES MODELS
OPTIONAL ACCESSORIES
C - Water drain 2" 2" 2" 2"
B - Cold water inlet 3/4" 3/4" 3/4" 3/4"
A - Hot water inlet 3/4" 3/4" 3/4" 3/4"
LG2126DXP
132360
LG2126SXP
132361
LG2426P
132364
LG2826P
132365
LEGEND
132360
105
210590
185
50
120
Ø30.0
700
600600
95 500
70
2100
50
700
900
317
40
40
132361
105
210 590
185
50
120
700
600600
95
500
70
2100
\U+220530
50
700
900
317
40
40
132364
105
185
50
120
\U+220530
700
600600
95 500
50
700
900
317
40
40
105
12001200
575
2400
575
132365
105
185
50
120
\U+220530
700
600600
95 500
50
700
900
317
40
40
105
14001400
775
2800
775
-
1
-
2
