Before First Use
1. Wash and rinse ice tray and crushing barrel before use. BE CAREFUL of the sharp
blade inside the crushing barrel.
2. Read all instructions.
Operation Instructions
1. Place the machine on a flat surface.
2. Raise ice crushing handle to the upper stop. Then plug in the machine.
3. Place the ice basin on the underframe.
4. Place ice cubes in the ice crushing barrel.
(Note: Quantity of the ice cubes should not exceed the ice crushing barrel level.)
5. Turn on the master switch.
6. Press down the ice crushing handle. The protective switch will automatically turn on to
crush the ice.
7. Once finished, raise the ice crushing handle to the upper stop again. Repeat the above
mentioned operation process.
Cleaning
When the ice crusher is not in use, turn off the power switch.
Unplug the ice crusher and wipe the machine dry.
Make sure the machine is kept on a dry surface.
Cautions
Make sure the ice crushing barrel does not jam. If the barrel jams, the motor will burn out.
If the ice crusher jams, turn off the power, unplug the unit, and raise the handle to remove
the jam with a spoon.
(Note: In order to continuously improve our products, our company has a right to modify the
mentioned technical parameters without giving notice.)
Technical Parameters
Model: ICE-V001
Voltage: 110V-220V/220V-240V
Power: 300W
Frequency: 50Hz-60Hz
Weight: 7.5-12Kg
Resolution: 2000R/M
Crushing Weight: 65kg per hour
