Mackie SP260 - CH341SERv1.1.0 Operating instructions

Brand: Mackie

Model: SP260 - CH341SERv1.1.0

Type: Operating instructions

page 1 of 2

INSTALLATION INSTRUCTIONS

MACKIE SP260 DRIVER AND CONTROL APPLICATION FOR PC • JUNE 2019

DRIVER CH314SER / CONTROL APPLICATION V1.1.0

Driver Version CH314SER /

Control Application Version 1.1.0

The Mackie SP260 CH34SER Driver and V..0 Control

Application installers are designed to allow your SP260

Speaker Processor to operate with Microsof Windows

operating systems. The SP260 works in Standalone mode by

default, but the PC Control Application expands your control

to an even greater level. Its large graphical user interface

shows all input and output processing controls on a single

page and lets you backup and manage preset files on your

computer’s hard drive or external storage devices.

Now that you have downloaded the SP260 Driver and Control

Application .zip files to a convenient location (e.g. your

desktop), you should unzip them and extract the contents

prior to running the installer.

System Requirements

PC Only:

Windows 7 32 / 64 RTM or greater

(Home, Premium, and Ultimate)

Windows Vista 32 / 64 RTM or greater

(Home, Business, and Ultimate)

Windows XP 32 SP 2 or greater

(Home and Pro)

Supported Devices

SP260:

Use driver CH341SER if your serial number ENDS with

CSIW00 and higher (e.g. IW, IX, IY, IZ, JA, JB, etc.).

Use driver V2.08.24 if your serial number ENDS with

CSIV999 and lower (e.g. IV, IU, IT, HA, GO, etc.).

Installation Instructions

. With the SP260 not yet connected to your computer,

unzip the Driver and Control Application .zip to a

convenient location

(e.g. your desktop)

2. In the extracted/unzipped folder, double-click

CH34SER.exe to install the USB driver (you may

have to do this twice; you will see a DOS window pop

up and disappear when the installation “takes”)

3. In the extracted/unzipped folder

double-click SP260v..exe to install

the Control Application

4. Connect the SP260 via USB

5. Power up the SP260 (you should see veriﬁcation in

the system tray that the device is ready

to use)

6. Launch the SP260 Control Application and

it should automatically discover the

connected device

Using the SP260 Control Application

The SP260 owner's manual contains some basic

descriptions of how the application works once installed.

Please visit http://www.mackie.com/products/sp260/ to

download a copy of the latest manual.

Mackie SP260 Driver and Control Application Installation Instructions

page 2 of 2

Part No. SW0937 Rev C 06/2019

www.mackie.com

That's about it!

Have fun, and feel free to contact Tech Support if you run

into any snags.

Technical Support

Please contact our splendid Technical Support heroes if you

have any questions.

E-mail:

www.mackie.com/support

Phone (United States): (800) 898 -3211

During normal business hours, Monday- Friday,

Pacific Time.

Mackie SP260 - CH341SERv1.1.0 Operating instructions

Mackie SP260 - CH341SERv1.1.0 Operating instructions

Mackie SP260 - CH341SERv1.1.0 Operating instructions

Related papers

Other documents