INSTALLATION INSTRUCTIONS
P 847•244•1234 www.barclayproducts.com
8/8/19
Bath
Accessories
Tools Needed
• Drill • Pencil • Tape Measure • Screwdrivers • Level • Stud Finder
1. Hold accessory to desired location on
wall. Mark wall for mounting brackets.
2. Drill holes for mounting brackets and
insert anchors.
3. Screw mounting brackets securely to
wall.
4. Place accessory over mounting bracket.
5. Secure accessory to bracket using set
screws and allen wrench provided.
If any accessory arrives with the mounting bracket already assembled to the unit remove the
bracket from the unit before following the installation steps.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI