Moen 82835EP User manual

Moen
Brand
Moen
Model
82835EP
Category
Sanitary ware
Type
User manual

This manual is also suitable for

Moen 82835EP is a single-handle shower-only fixture with a pressure balancing cycle valve design and an adjustable temperature limit stop. This ADA-compliant showerhead delivers a flow rate of 1.75 gpm and is designed for back-to-back installations. Its lever-style handle operates counterclockwise through a 270-degree arc, with off at 6 o'clock and maximum hot at 9 o'clock. The 1222 cartridge design features nonmetallic/nonferrous and stainless steel materials.

Moen 82835EP is a single-handle shower-only fixture with a pressure balancing cycle valve design and an adjustable temperature limit stop. This ADA-compliant showerhead delivers a flow rate of 1.75 gpm and is designed for back-to-back installations. Its lever-style handle operates counterclockwise through a 270-degree arc, with off at 6 o'clock and maximum hot at 9 o'clock. The 1222 cartridge design features nonmetallic/nonferrous and stainless steel materials.

BOARDWALK™
Single-Handle Shower Only
Model : 82835 series
DESCRIPTION
• Component construction with various nishes identied by sux
• Pressure balancing cycle valve design with an adjustable temperature limit stop
• 1/2” IPS connections
• Includes valve, showerhead, arm and ange
OPERATION
• Lever style handle
• Handle operates counterclockwise through a 270˚arc with o at 6 o’clock and
maximum hot at the 9 o’clock position. Shut o in clockwise direction
• Adjustable temperature limit stop to control maximum hot water temperature
• Pressure balancing mechanism maintains selected discharge temperature to ±
2°
FLOW
• Designed to deliver 1.75 gpm (6.6 L/min)
(for models manufactured after 3/1/18)
• Designed to deliver 2.5 gpm (9.5 L/min)
(for models manufactured before 3/1/18)
• EP Sux models are limited to 1.75 gpm (6.6 L/min)
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certied to ASME A112.18.1/CSA B125.1 and all applicable
requirements referenced therein
• Products marked with 1.75 gpm are compliant with California water eciency
regulations
• ADA
for lever handle
WARRANTY
• Lifetime limited warranty against material or manufacturing defects to the
original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Floor Line
Plastic
Tub/Shower
Surround
Floor Line
7"
(178mm)
ESC. DIAM.
3-1/2"
(90mm)
6'-6"
(1981mm)
Nominal
C
L
Shower
45" (1143mm)/
48" (1219mm)
1-3/8"
(35mm)
2-1/2" Max.
(63mm)
1/2" (13mm) Min. CC
5/8" (16mm) Min. IPS
2" (51mm) CC
1-7/8" (48mm) IPS Max. Wall
Face of Stud
Finished Wall Line
3-1/2" (90mm) Max.
2-1/4" (57mm) Min.
C
L
1-3/8"
(35mm)
1-1/2" (38mm)
3/16" (typ) (5mm)
Plaster Ground
4-3/8"
(111mm)
8-3/4"
(222mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
6/18
EP Sux Models Only
  • Page 1 1

Moen 82835EP User manual

Moen
Brand
Moen
Model
82835EP
Category
Sanitary ware
Type
User manual
This manual is also suitable for

Moen 82835EP is a single-handle shower-only fixture with a pressure balancing cycle valve design and an adjustable temperature limit stop. This ADA-compliant showerhead delivers a flow rate of 1.75 gpm and is designed for back-to-back installations. Its lever-style handle operates counterclockwise through a 270-degree arc, with off at 6 o'clock and maximum hot at 9 o'clock. The 1222 cartridge design features nonmetallic/nonferrous and stainless steel materials.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents