The Amazing Baby Company
LOLLIPOP LITE STROLLER
WARNING!
1. Never leave child unattended. Always keep child in view while in stroller.
2. To avoid serious injury from falling or sliding out. Always use seat belt. After fastening buckles, adjust belts
to get a snug t around your child.
3. Never carry more than one child at a time in the stroller.
4. Do not hang any items on the handles of the stroller as this makes the stroller unstable.
5. Ensure that children are clear of moving parts before making any adjustments to the stroller.
6. Ensure that all persons who operate this stroller know how to operate it safely.
7. Do not allow children to play with or hang on the stroller.
8. Do not use your stroller for anything other than its intended purpose.
9. Be careful when going up or down curbs, stairs, and escalators. Remove your child and fold the stroller when
going up or down stairs or escalators.
10. Your child is ready for this stroller if: He/She is at least 6 months old and no greater than 36 months old.
11 .Before use remove and dispose of all plastic bags and packaging material and keep them out of reach from children.
12. Use the swivel wheel mode on smooth surfaces, we recommend you to lock the swivel wheels on uneven surfaces.
13. Do not use any accessories, spare parts, or components that were not supplied by the manufacturer. They
may make the stroller unsafe.
14. Do not use the stroller if any part is lost or damaged.
15. Any unauthorized modifications to this stroller will invalidate any manufacturer guarantees.
ASSEMBLY INSTRUCTIONS:
Step 1: Open the stroller as per figure 1.
Fig 1
Step 2: Insert the Harness from the gap of the cushion and
adjust 5 point harness as shown in fig 2a and fig 2b
Fig 2
Step 3: Insert the front wheel in the front frame of the stroller
with swivel lock upside as shown in fig 3.
Step 4: Insert the back wheel in the back side of the stroller
frame as show in the g 4 till you hear the “Click Sound”. To
uninstall the wheel push the Wheel lock button and pull it out.
Fig 4
Step 5: Pull the hooks on the handle and make it reversible as
shown in g 5
Fig 5
Step 6: To adjust foot rest, insert the rod on the footrest tray as
shown in g 6.
Fig 6
Step 7: To adjust the backrest, pull the U shaped frame and
adjust the position accordingly as shown in g 7. Stroller is having
3 positions. Sleeping, Resting and Sitting.
Fig 7
Step 8: Pull down the swivel lock on the front as shown in figure to
stop make front wheel rotate 360 degree as shown in fig 8
Fig 8
Step 9: To Install link brake, please x the rods with nut and bolts on
both the sides of the back wheels brake as shown in g 9.
Fig 9
Step 10: To close the stroller push rod at the bottom of the seat as shown in Fig 10 and push the stroller forward.
Stroller will close down as shown in g 11.
Fig 11
Fig 10
MAINTENANCE & CARE:
Clean the plastic parts of the pram with a damp cloth. Do not use abrasives or bleach.
Clean and lubricate the wheels, safety locks (where appropriate). For sliding parts use light oil or a silicon spray.
Do not use heavy oil-based lubricants as this will attract dust and grit which tends to clog and
damage moving parts.
FABRIC CARE:
If the pram becomes wet, do not fold the hood when you take the pram indoors. Always leave the pram
to dry naturally and do not expose pram to strong heat sources like res, radiators and direct sunlight.
Whilst fabrics are carefully selected and tested, washing, wearing and exposure to direct sunlight may
cause the color to fade or change.
The exposed edges of fabric covers are often the rst to wear and fray. Remember this when storing or
transporting your pram and accessories.
Light soiling to the pushchair can be removed with a damp sponge and a mild detergent.
WASHING INSTRUCTIONS:
Wipe only, do not use abrasives or bleach.
/
