Bush BFSNB12W Full Size Dishwasher User manual

Instruction manual

Dishwasher

BFSNB12B/W

You’ll soon be enjoying your new Dishwasher.

It all begins here, with your instructions. Don’t worry,

there’s nothing too technical coming up. Just

simple, step-by-step guidance to get you up and

running quickly. Sound good? Then let’s get started.

Help and Guidance

We’re here to help you get the most from your Dishwasher. Should you require any

guidance, a simple solution can often be found online at:

www.argos-support.co.uk

If you still require further assistance, call one of our experts on 0345 257 7271.

e any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,ou requirIf y

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.or online at

www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.

2

3

Contents

Product support

Troubleshooting 32

Help and assistance

34

Declaration of conformance to product

standards

35

Disposal

35

Guarantee

3

6

7

6

10

Safety information

Getting to know your

Dishwasher

Ready? Let’s begin

Accessories

13

Installing your Dishwasher

16

20

24

25

28

Installation requirements

Functions

Using your Dishwasher

First use of Dishwasher

Standard and

advanced functions/use

Care and Maintenance

Cleaning

Maintenance actions

Technical specifications

29

1

2

3

4

5

6

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.

17

Connections (electrical, water)

This page is left intentionally blank

1

Safety information

Important - Please read these instructions fully before

installing or operating your Dishwasher.

Safety information

6

Befo

r

e use

• Carefully read all instructions before using your

appliance and keep this manual for future

reference.

• Check the machine and its packaging for any

damage. If the supply cord is damaged, it must be

replaced by the manufacturer, their service agent

or similarly qualified persons in order to avoid a

hazard.

• Unwrap the packaging as indicated and dispose of

it according to the rules provided.

• Packing materials may be dangerous to the

children. Please keep all packing materials

(plastic bags, foams etc) far away from children.

• This appliance can be used by children aged from

8 years and above, and by persons with reduced

physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given

supervision or instruction concerning the use of

the appliance in a safe way and understand

hazards involved. Children should not play with

the appliance. Cleaning and user maintenance

shall not be done by children without supervision.

• Children should be supervised to ensure that they

do not play with the appliance. There may be

some residue left in the machine after washing.

Keep children away from the machine when it is

open.

• Ensure old machines do not threaten child safety.

Children can lock themselves in old machines. To

prevent such a situation, break the door lock and

cut the mains cable..

• Only original spare parts should be used with the

machine.

• Check the heat-resistance of plastic items before

washing them in the machine.

• Do not put unsuitable items for dishwashing into

the machine and do not over-fill any basket above

its capacity.

• Our company will not be responsible for any

deformation inside of the machine due to misuse.

WARNING: Some dishwasher detergents are strongly

alkaline. They can be extremely dangerous if

swallowed. Avoid contact with the skin and eyes and

keep children away from the dishwasher when the

dooris open. Check that the detergent receptacle is

empty after completion of the wash cycle.

• Choose a suitable and safe place to install your

machine.

• Follow the instructions on installing and connecting

the machine.

• Unplug the machine before installation.

• Machine should be installed by authorised service

agent or similarly qualified persons only.

• Check whether the indoor electrical fuse system is

connected according to regulations.

• All electrical connections must match the values on

the plate

• Ensure the machine does not stand on the electrical

supply cable.

• NEVER use an extension cord or a multiple socket

connection.

• The plug should be accessible after the machine is

installed.

• After installation, run your machine unloaded for the

first time.

• The machine MUST not be plugged in during

positioning.

• Always use the plug supplied with your machine.

• The machine's electrical cable should be replaced in

case of a damage by an authorised service agent or

similarly qualified person to prevent a hazard.

Installation Warnings

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.

Safety information

Important - Please read these instructions fully before

installing or operating your Dishwasher

Safety information

7

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on XXXX XXX XXXX.

During Use

This machine is for domestic use only, do not use it for

other purposes. Commercial use will void the

guarantee.

• Do not stand, sit or place loads on the open

door of the dishwasher.

• Only use detergents and rinse aids

produced specifically for dishwashers. Our

company is not responsible for any damage

that may occur due to misuse.

• Do not drink water from the machine.

• Due to the danger of an explosion, do not

place any chemical dissolving agents into

the machine's washing section.

• Do not open the door while the machine is

in operation, hot water may spill out. Safety

devices ensure the machine stops if the

door is opened.

• The machine door should not be left open.

It may present a trip hazard or cause

accidents.

• Place knives and other sharp objects in the

cutlery basket in a blade-down position.

• For safety, disconnect the plug once a

program has finished.

• To avoid an electric shock, do not unplug

the machine with wet hands.

• Pull the plug to disconnect the machine

from the mains, never pull on the cord.

• For models with the automatic door-

opening system, when the EnergySave

option is active, the door will open at

the end of a program. To prevent

damage to your dishwasher, do not

force the door close after 1 minute of

auto-open. For effective drying, keep

the door open for 30 minutes after a

programme is complete. Do not stand

in front of the door after the auto-

open signal sounds.

• In the case of a malfunction, repair

should only be performed by

authorised service personnel.

Otherwise, the warranty will be void.

• Before repair work, the machine

should be disconnected from the

mains. Do not pull the cable to unplug

the machine. Switch off the water tap.

• Operation at a low voltage will cause a

decline in performance levels.

• Do not use this appliance if there are

any missing or damaged parts.

• Do not attempt to repair the appliance

yourself. contact the manufacturer,

their approved service agent or the

customer helpline on: 0345 257 7271.

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.

This page is left intentionally blank

Getting to know your

Dishwasher

2

Getting to know your Dishwasher

10

Getting to know your Dishwasher

You’ll be up and running in no time

Ready? Let’s begin...

Please read these instructions carefully. They contain

important information which will help you get the best

from your Dishwasher and ensure safe and

correct installation and operation.

If you require any further assistance, our technical

experts are happy to help. For full details, refer to

the product support section at the end of these

instructions.

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.

Getting to know your Dishwasher

You’ll be up and running in no time

Getting to know your Dishwasher

11

1. Worktop

2. Upper basket with

racks

3. Upper spray arm

4. Lower basket

5. Lower spray arm

6. Filters

7. Rating plate

8. Control Panel

9. Detergent and rinse-aid

dispenser

10. Cutlery basket

11. Salt dispenser

12. Upper basket track latch

13. Mini Active Drying Unit -

This system provides better

drying performance for

your dishes.

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.

13

Capacity

12 place

settings

Dimensions

Height

Width

Depth

850(mm)

600(mm)

598(mm)

Net weight 46 (kg)

Operating

voltage /

frequency

220-240V

50 (Hz)

Total current 10(A)

Total power 1900(W)

Water supply

pressure

Maximum:

1 (Mpa)

Minimum:

0.03 (Mpa)

Getting to know your Dishwasher

12

Getting to know your Dishwasher

You’ll be up and running in no time

Model

Capacity

Drying Class

Energy Class

BFSNB12W

12 pcs

A++

1900W

A

BFSNB12B

12 pcs

A++ 1900W A

Ac

c

e

ssories

This machine includes the below accessories, please

install these parts before operating.

• Water Inlet Hose x1

• Drain Hose x1

Power

Getting to know your Dishwasher

13

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.

Installing your Dishwasher

3

Installing your Dishwasher

15

Installing your Dishwasher

Bringing it all together

Positioning your Dishwasher

When positioning the machine, place it in

an area where dishes can be easily loaded

and unloaded. Do not put the machine in an

area where the ambient temperature falls

below 0°C..

Read all warnings located on the packaging

before removing the packaging and

positioning the machine.

Place the machine close to a water tap

and drain. Take into consideration that the

connections will not be altered once the

machine is in position.

Do not hold the machine by its door or

panel.

Leave an adequate distance around the

machine to allow ease of movement when

cleaning.

Ensure the water inlet and outlet

hoses are not squeezed or trapped

and that the machine does not stand on the electrical

cable while positioning.

Adjust the feet so the machine is level and

balanced. The machine should be placed

on flat ground otherwise it will be unstable

and the door of the machine will not close

properly.

Water connection

We recommend fitting a filter to your water

inlet supply in order to prevent damage to

your machine due to contamination (sand,

rust, etc.) from indoor plumbing. This will

also help prevent yellowing and deposit

formation after washing.

Water Inlet Hose

WARNING: Use the new water inlet hose

supplied with your machine, do not use an old

machine's hose.

WARNING: Run water through the new hose

before connecting.

WARNING: Connect the hose directly to the

water inlet tap. The pressure supplied by the tap

should be a minimum of 0.03MPa and a maximum

of 1 MPa If the pressure exceeds 1MPa, a pressure

relief valve must be fitted between the connection.

WARNING: After the connections are made,

turn the tap on fully and check for water leaks.

Always turn off the water inlet tap after a wash

program has finished.

An Aquastop water spout is available with

some models. Do not damage it or allow it to

become kinked or twisted.

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.

Installing your Dishwasher

Bringing it all together

Installing your Dishwasher

16

Electrical Connection

WARNING: Your machine is set

operates at 220-240V If the mains voltage

supply to your machine is 110V connect a

transformer of 110/220V and 3000 W

between the electrical connection

The earthed plug of the

machine must be connected to an earthed

outlet supplied by suitable voltage and

current.

In the absence of earthing

installation, an authorised electrician should

carry out an earthing installation. In the case

of use without earthing installed, we will not

be responsible for any loss of use that may

occur.

The indoor fuse current value

should be 10-16A

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

Drain Hose Connection

Connect water drain hose directly to water

drain hole or to the sink outlet spigot. This

connection should be minimum 50cm and

maximum 110cm from floor plane.

IMPORTANT: Items will not wash properly if a

drain hose longer than 4m is used.

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.

Installing your Dishwasher

Bringing it all together

Installing your Dishwasher

17

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.

This page is left intentionally blank

Functions

4

Functions

20

Functions

Simple everyday use

Programme Table

NOTE: The programme duration may change according to the amount of dishes,

the water temperature, the ambient temperature and selected additional functions.

• Only use powder detergent for short programmes.

• Short programmes do not include drying.

• To assist drying, we recommend slightly opening the door after a cycle has finished.

Control Panel

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.

Programme

Detergent

A: 5cm³

B1: 15cm³

B2: 25cm³

Duration

(min)

Description

Quick 30’

B2 30 For lightly soiled dishes and a quick wash.

Eco

(Reference)

A+B2 165 Standard programme for normally soiled, daily-used dishes.

Super 50’

A+B2 50 For normally soiled, daily-used dishes with a faster programme.

Intensive

A+B2 117 For heavily soiled dishes.

9

NOTE: If you press the option (3) button once, half

load option will be activated. This option will shorten

the durations of the selected programs to reduce

power and water consumption. If you are using

combined detergents that contain salt, rinse aid and

extra features, press the option button for the

second time and activate the tablet function. You

can use the Extra button (1) to add the following

functions to the compatible washing program.

When the hygiene function (8) is active, you can

make the washing process more hygienic by

changing the washing temperature and durations of

the current program.

If you select the extra rinsing (8) function, the extra

rinsing light will become on and thus, washing-

rinsing steps will be added to the selected program,

making your dishes cleaner and shinier. .

If you select the extra drying (8) function, the extra

drying light will become on

and thus, drying duration of the selected program

will extend, making your dishes drier. Additionally,

Hygiene and Drying functions cannot be selected at

the same time since they are incompatible with each

other

You can press the On/Off button (4)

to switch on the product. On/Off lights will be on

so long as the machine is on. Press the program

button (5) to set the suitable program.

Press the Start/Pause button (6) to start the

program. Once the selected program has started,

the Washing light will be on and the program

duration will be displayed. If you open the door of

the machine while the program is continuing,

program number and program duration will be

displayed alternately.

You can follow the program flow with the

Washing, Rinsing, Drying and End lights (7) on the

control panel. Once the drying light has become

on, the machine will remain silent for 40 to 50

minutes.

Functions

21

Functions

Simple everyday use

Operating the Machine

If you have used any extra function in the washing

program that you last used, that function will be

active in the next washing program. If you want to

cancel that function for the newly selected program,

press and hold the button of the relevant function

since the corresponding lights go off, or press the

On/Off button (4) to switch off the machine. If you

want to use an extra function for the newly selected

program, select the desired functions.

NOTE: If you switch off the machine after selecting

the delay time and starting the program, the delay

time will be cancelled.

NOTE: You can press the delay button (2) before the

program starts to delay the program start time for 1

to 19 hours.

If you want to change the delay time, press the Start/

Pause button first, and then press the Delay button

to select the new delay time. Press Start/Pause

button to activate the new delay time. To cancel the

delay, press the Delay button until the delay time is

0h.

NOTE: Salt refill indicator (9) will

become on if salt is missing/insufficient. In this case,

please fill the salt compartment.

NOTE: Rinse aid refill indicator (9) will

become on if rinse aid is missing/insufficient. In this

case, please fill the rinse aid compartment.

C

h

anging a programme

When you want to change the program while a

washing program is running on

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,

or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.

Press Start/Pause button.

Once the program has stopped, use the

program selection button to select the

desired program.

Press the Start/Pause button to start

the newly selected program.

The newly selected program will

continue in the place of the previous

program.

Page is loading ...