Triton Systems TDM Owner's manual

Brand
Triton Systems
Model
TDM
Type
Owner's manual

Triton Systems TDM is a versatile and powerful device designed to enhance the functionality of your ATM. With its advanced capabilities, the TDM offers a range of features to improve the efficiency and accuracy of your cash handling operations.

The TDM's primary function is to provide support for the upper double detect assembly area in TDM 200/250 dispenser mechanisms. By stabilizing this area, the TDM helps to reduce the number of high rejects from Cassette A, ensuring smoother and more reliable cash dispensing.

Installing the TDM is a straightforward process that can be completed by qualified service personnel. The kit includes all the necessary parts and tools, along with clear and concise instructions to guide you through the installation.

Triton Systems TDM is a versatile and powerful device designed to enhance the functionality of your ATM. With its advanced capabilities, the TDM offers a range of features to improve the efficiency and accuracy of your cash handling operations.

The TDM's primary function is to provide support for the upper double detect assembly area in TDM 200/250 dispenser mechanisms. By stabilizing this area, the TDM helps to reduce the number of high rejects from Cassette A, ensuring smoother and more reliable cash dispensing.

Installing the TDM is a straightforward process that can be completed by qualified service personnel. The kit includes all the necessary parts and tools, along with clear and concise instructions to guide you through the installation.

TDM 200/250
STiffener
BrackeT
inSTallaTion
TDN 07103-00198 June 19 2009
COPYRIGHT NOTICE
© 2008 Triton. All Rights Reserved. TRITON logo is
a registered trademark of Triton Systems of Delaware.
corporaTe HeaDquarTerS:
21405 B Street
Long Beach, MS 39560
Phone: (228) 575-3188
Fax: (228) 575-3200
2
TDM STiffener BrackeT
inTroDucTion purpoSe, Scope, applicaTion, parTS & ToolS...............................................pg 2
SecTion 1 TDM STiffener BrackeT inSTallaTion ..........................................................pg 3
purpoSe
This guide covers the steps for installing a support bracket in the TDM. It helps support the upper double
detect assembly area in the TDM 200/250 and resolves the problem of high rejects from Cassette A.
Scope
This procedure applies to all VERIFIED TRITON TRAINED service personnel involved in the process
of maintaining or converting Triton ATMs.
applicaTion
This conversion kit applies to all models of Triton ATMs using the TDM 200/250 dispenser mechanism.
Contact Triton Technical Support for further verication.
requireD parTS anD ToolS
TOOLS REQUIRED
Torx driver T20 / #2 or smaller, thin shaft Philips screw driver, no longer
than 6 inches
KIT 06100-08139
TDM stiffener bracket kit
PART NUMBER DESCRIPTION QTY
02054-00176 Screw self tapping philips head 2
03110-07080 TDM Stiffener 1
07103-00198 TDM Stiffener Bracket installation manual 1
NOTE:
Care must be taken in the handling of the bracket, detents and screws. DO NOT overtighten the screws,
or damage to the bracket or detents will occur.
Document Updates
June 19 2009 Original
TaBle of conTenTS
3
TDM STiffener BrackeT
- Follow the appropriate procedure to shut down your particular ATM and remove power.
- Remove the reject and note cassettes.
- In the upper cassette area, remove the 2 (two)
screws and detent clips with the T20 torx driver.
Retain the detents, discard the screws.
Note the position of the mounting holes and right
side indentation in this view.
- Position the stiffener bracket in the rear of the
lower cassette area as shown. This bracket is blue
for clarication. Yours will be black.
Note the indentation on the right side of the
bracket
inSTallaTion proceDure
SecTion 1
4
TDM STiffener BrackeT
- Using the new, longer screws, reinstall the detents as shown. It may take a little adjustment of the
bracket to ensure engagement of the screws into the bracket. DO NOT over tighten the screws or you
risk damage to the bracket or detents. The detents should not move. Note the relationship of the screw
and detent. Ensure the detents face straight forward.
- Replace the cassettes and return the ATM to service.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Triton Systems TDM Owner's manual

Brand
Triton Systems
Model
TDM
Type
Owner's manual

Triton Systems TDM is a versatile and powerful device designed to enhance the functionality of your ATM. With its advanced capabilities, the TDM offers a range of features to improve the efficiency and accuracy of your cash handling operations.

The TDM's primary function is to provide support for the upper double detect assembly area in TDM 200/250 dispenser mechanisms. By stabilizing this area, the TDM helps to reduce the number of high rejects from Cassette A, ensuring smoother and more reliable cash dispensing.

Installing the TDM is a straightforward process that can be completed by qualified service personnel. The kit includes all the necessary parts and tools, along with clear and concise instructions to guide you through the installation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers