2. Boss
  3. GT-1000
GT-1000

Boss GT-1000 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Boss GT-1000 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Connecting the BOSS
TONE STUDIO iOS App
to the GT-1000 Unit
04© 2018 Roland Corporation
For details on how to use BOSS TONE STUDIO, refer
to the “Using BOSS TONE STUDIO for GT-1000” PDF.
1. Power-on the GT-1000 unit and the
mobile device.
* Before you continue, turn on the Bluetooth
switch of the GT-1000. Make this setting in
[MENU]
0
“HARDWARE SETTING”
0
“OTHER.”
(With the factory settings, this is o.)
2. In your mobile device’s settings, turn
Bluetooth on.
NOTE
Even if “GT-1000 MIDI” is shown in the
“DEVICES” list, don’t tap it.
3. Start the “BOSS TONE STUDIO for
GT-1000” app that you installed in your
mobile device.
4. Tap [Bluetooth MIDI DEVICE] that
appears in the screen, and then tap
“GT-1000.”
* If you changed the Bluetooth ID (p. 7), the
changed number is shown following “GT-1000.”
If “Bluetooth Pairing Request” appears, tap “Pair.”
Verify that “Connected” is shown.
5. Tap [<Back] to return to the previous
screen.
6. Verify that “GT-1000 MIDI (Bluetooth)” is
shown for “CONNECT.”
GT-1000 (Bluetooth)
7. Tap [OK] to start communication.
If you can’t connect
Check each of the following ve items one at a
time.
1
In the settings of the GT-1000 unit, is the
Bluetooth function turned on?
Verify that the GT-1000 unit’s Bluetooth indicator is
blinking or lit.
If it is unlit, press the [Bluetooth] button to make it
blink or light.
2
In step 2 of the procedure (p. 2), could you
have tapped a model name shown on the
mobile device?
When you turn the Bluetooth switch on in step
2, “GT-1000 MIDI” might appear in the list of
“DEVICES” but you should not tap it. If you tapped
it, clear the pairing, and try the procedure again
from step 1.
Clearing the pairing
1. Tap the “i” located beside
“Connected,” and then “Forget
This Device.”
2. Turn the Bluetooth switch o.
3
Turn Bluetooth on and o once again
Turn Bluetooth on/o again.
4
Close all apps, and try the procedure again
from step 1 (p. 2)
If you’ve checked
1 – 3 and still cannot connect
to the app, close all apps that are running on your
mobile device.
If the GT-1000 is paired, clear the pairing.
Closing the app
Double-click the home button, and swipe
up on the app screen.
* If you’re using the iPhone X, the
procedure for closing an app is
dierent. Close the app as appropriate
for the iPhone X.
5
Power-o the mobile device and the GT-1000
unit, and then power them on again
If you’ve checked
1 – 4 and still cannot connect
to the app, power-o the mobile device and the
GT-1000, wait for about 10 seconds, and power
them on again.
If the GT-1000 is paired, clear the pairing.
If you’ve checked 1 – 5 and still cannot connect
to the app, contact your dealer or a Roland
customer service center.
Changing the Bluetooth ID
Here’s how you can specify “1” as the
Bluetooth ID.
1. Press the GT-1000’s MENU
button.
2. Choose “HARDWARE SETTING.
3. Choose “OTHER”.
4. Change the Bluetooth ID
parameter.
Value: OFF, 1–9
If the setting was made correctly, the
Bluetooth MIDI DEVICE screen of BOSS
TONE STUDIO indicates “GT-1000_1.”
If, after specifying the number “1” or 2,”
you want to return to a state in which
nothing is specied, set the parameter
to “OFF.”
/