KTM 300 EXC 2020 Owner's manual

Brand: KTM

Model: 300 EXC 2020

Category: Motorcycles

Type: Owner's manual

This manual is also suitable for

300 EXC BR 2020

OWNER'S MANUAL 2020

300 EXC

Art. no. 3214008en

DEAR KTM CUSTOMER

*3214008en*

3214008en

01/2019

DEAR KTM CUSTOMER

Congratulations on your decision to purchase a KTM motorcycle. You are now the owner of a state-of-the-art

sports vehicle that will continue giving you pleasure for a long time if you maintain it properly.

We wish you good and safe riding at all times!

Enter the serial numbers of your vehicle below.

Vehicle identification number ( p. 13) Dealer's stamp

Engine number ( p. 13)

Key number ( p. 13)

The Owner's Manual contained the latest information for this model series at the time of going to print. However,

minor differences due to further developments in design cannot be ruled out completely.

All specifications contained are non-binding. KTM Sportmotorcycle GmbH specifically reserves the right to mod-

ify or delete technical specifications, prices, colors, forms, materials, services, designs, equipment, etc., without

prior notice and without specifying reasons, to adapt these to local conditions, as well as to stop production of a

particular model without prior notice. KTM accepts no liability for delivery options, deviations from figures and

descriptions, misprints, and other errors. The models portrayed partly contain special equipment that does not

belong to the regular scope of supply.

Reproduction, even in part, as well as copying of all kinds, is permitted only with the express written permission

of the copyright owner.

ISO 9001(12 100 6061)

KTM applies quality assurance processes that lead to the highest possible product quality as

defined in the ISO 9001 international quality management standard.

Issued by: TÜV Management Service

KTM Sportmotorcycle GmbH

Stallhofnerstraße 3

5230 Mattighofen, Austria

This document is valid for the following models:

300 EXC BR (F7440T6)

TABLE OF CONTENTS

1 MEANS OF REPRESENTATION ...................... 6

1.1 Symbols used .................................... 6

1.2 Formats used..................................... 6

2 SAFETY ADVICE............................................ 7

2.1 Use definition – intended use.............. 7

2.2 Misuse.............................................. 7

2.3 Safety advice..................................... 7

2.4 Degrees of risk and symbols................ 7

2.5 Tampering warning............................. 8

2.6 Safe operation ................................... 8

2.7 Protective clothing ............................. 9

2.8 Work rules......................................... 9

2.9 Environment...................................... 9

2.10 Owner's Manual ................................. 9

3 IMPORTANT NOTES.................................... 10

3.1 Manufacturer and implied warranty.... 10

3.2 Fuel, auxiliary substances ................. 10

3.3 Spare parts, accessories ................... 10

3.4 Service ........................................... 10

3.5 Figures ........................................... 10

3.6 Customer service.............................. 10

4 VIEW OF VEHICLE ...................................... 11

4.1 View of vehicle, front left (example) ... 11

4.2 View of vehicle, rear right

(example)........................................ 12

5 SERIAL NUMBERS ..................................... 13

5.1 Vehicle identification number............ 13

5.2 Type label ....................................... 13

5.3 Key number..................................... 13

5.4 Engine number ................................ 13

5.5 Fork part number ............................. 14

5.6 Shock absorber article number .......... 14

6 CONTROLS................................................. 15

6.1 Clutch lever..................................... 15

6.2 Hand brake lever.............................. 15

6.3 Throttle grip .................................... 15

6.4 Switch-off button ............................. 15

6.5 Horn button..................................... 16

6.6 Light switch .................................... 16

6.7 Turn signal switch............................ 16

6.8 Emergency OFF switch ..................... 16

6.9 Start button..................................... 17

6.10 Overview of indicator lamps .............. 17

6.11 Opening the fuel tank filler cap ......... 17

6.12 Closing the fuel tank filler cap........... 18

6.13 Fuel tap .......................................... 18

6.14 Choke ............................................. 19

6.15 Shift lever ....................................... 19

6.16 Foot brake lever ............................... 19

6.17 Side stand....................................... 20

6.18 Steering lock ................................... 20

6.19 Locking the steering......................... 20

6.20 Unlocking the steering...................... 21

7 COMBINATION INSTRUMENT ..................... 22

7.1 Combination instrument overview ...... 22

7.2 Activation and test ........................... 22

7.3 Setting the kilometers or miles .......... 22

7.4 Adjusting combination instrument

function .......................................... 23

7.5 Setting the clock.............................. 24

7.6 Viewing the lap time......................... 24

7.7 Display mode SPEED (speed)............ 25

7.8 Display mode SPEED/H (operating

hours)............................................. 25

7.9 Setup menu .................................... 25

7.10 Adjusting the unit of measurement .... 26

7.11 Display mode SPEED/CLK (time) ....... 27

7.12 Setting the clock.............................. 27

7.13 Display mode SPEED/LAP (lap

time) .............................................. 27

7.14 Viewing the lap time......................... 28

7.15 Display mode SPEED/ODO

(odometer) ...................................... 28

7.16 Display mode SPEED/TR1 (trip

master 1) ........................................ 29

7.17 Display mode SPEED/TR2 (trip

master 2) ........................................ 29

7.18 Setting TR2 (trip master 2)............... 29

7.19 Display mode SPEED/A1 (average

speed 1) ......................................... 30

7.20 Display mode SPEED/A2 (average

speed 2) ......................................... 30

7.21 Display mode SPEED/S1 (stop

watch 1) ......................................... 31

7.22 Display mode SPEED/S2 (stop

watch 2) ......................................... 31

7.23 Table of functions ............................ 32

7.24 Table of conditions and menu

activation ........................................ 33

8 PREPARING FOR USE................................. 34

8.1 Advice on preparing for first use ........ 34

8.2 Running in the engine ...................... 35

8.3 Preparing the vehicle for difficult

operating conditions......................... 35

8.4 Preparing the vehicle for riding on

dry sand.......................................... 36

8.5 Preparing the vehicle for riding on

wet sand ......................................... 37

8.6 Preparing the vehicle for riding on

wet and muddy circuits .................... 38

8.7 Preparing vehicle for high

temperatures or slow riding ............... 39

TABLE OF CONTENTS

8.8 Preparing the vehicle for low

temperatures or snow ....................... 39

9 RIDING INSTRUCTIONS.............................. 40

9.1 Checks and maintenance measures

when preparing for use ..................... 40

9.2 Starting the vehicle.......................... 40

9.3 Starting off...................................... 41

9.4 Shifting, riding ................................ 41

9.5 Braking........................................... 42

9.6 Stopping, parking............................. 42

9.7 Transporting.................................... 43

9.8 Refueling ........................................ 43

10 SERVICE SCHEDULE .................................. 45

10.1 Additional information...................... 45

10.2 Required work ................................. 45

10.3 Recommended work ......................... 46

11 TUNING THE CHASSIS ............................... 47

11.1 Checking the basic chassis setting

with rider's weight............................ 47

11.2 Compression damping of the shock

absorber.......................................... 47

11.3 Adjusting the low-speed

compression damping of the shock

absorber.......................................... 47

11.4 Adjusting the high-speed

compression damping of the shock

absorber.......................................... 48

11.5 Adjusting the rebound damping of

the shock absorber........................... 49

11.6 Measuring the dimension of the rear

wheel unloaded................................ 49

11.7 Checking the static sag of the shock

absorber.......................................... 50

11.8 Checking the riding sag of the shock

absorber.......................................... 50

11.9 Adjusting the spring preload of the

shock absorber ............................. 51

11.10 Adjusting the riding sag ................ 52

11.11 Checking the basic setting of the

fork ................................................ 52

11.12 Adjusting the compression damping

of the fork ....................................... 53

11.13 Adjusting the rebound damping of

the fork........................................... 53

11.14 Handlebar position........................... 54

11.15 Adjusting the handlebar position .... 54

12 SERVICE WORK ON THE CHASSIS............... 56

12.1 Raising the motorcycle with a lift

stand .............................................. 56

12.2 Removing the motorcycle from the

lift stand ......................................... 56

12.3 Bleeding the fork legs....................... 56

12.4 Cleaning the dust boots of the fork

legs ................................................ 57

12.5 Removing the fork protector .............. 57

12.6 Installing the fork protector............... 58

12.7 Removing the fork legs .................. 58

12.8 Installing the fork legs .................. 59

12.9 Removing the lower triple clamp .... 59

12.10 Installing the lower triple clamp ..... 60

12.11 Checking steering head bearing

play ................................................ 62

12.12 Adjusting the steering head bearing

play ............................................ 63

12.13 Lubricating the steering head

bearing ........................................ 64

12.14 Removing front fender ...................... 64

12.15 Installing front fender....................... 64

12.16 Removing the shock absorber ........ 65

12.17 Installing the shock absorber ......... 65

12.18 Removing the seat ........................... 66

12.19 Mounting the seat............................ 66

12.20 Removing the air filter box cover ....... 67

12.21 Installing the air filter box cover ........ 67

12.22 Removing the air filter .................. 68

12.23 Installing the air filter ................... 68

12.24 Cleaning the air filter and air filter

box ............................................. 69

12.25 Preparing air filter box cover for

securing ...................................... 69

12.26 Removing the main silencer .............. 70

12.27 Installing the main silencer............... 70

12.28 Changing the glass fiber yarn filling

in the main silencer ...................... 70

12.29 Removing the fuel tank ................. 71

12.30 Installing the fuel tank .................. 72

12.31 Checking the chain for dirt................ 73

12.32 Cleaning the chain ........................... 74

12.33 Checking the chain tension ............... 74

12.34 Adjusting the chain tension............... 75

12.35 Checking the chain, rear sprocket,

engine sprocket, and chain guide ...... 76

12.36 Checking the frame ...................... 79

12.37 Checking the link fork ................... 79

12.38 Checking throttle cable routing.......... 79

12.39 Checking the rubber grip .................. 80

12.40 Adjusting the basic position of the

clutch lever ..................................... 81

12.41 Checking/correcting the fluid level of

the hydraulic clutch ......................... 81

12.42 Changing the hydraulic clutch

fluid ............................................ 82

13 BRAKE SYSTEM ......................................... 84

13.1 Checking the free travel of the hand

brake lever ...................................... 84

TABLE OF CONTENTS

13.2 Adjusting the free travel of the

handbrake lever ............................... 84

13.3 Checking the brake discs .................. 84

13.4 Checking the front brake fluid level ... 85

13.5 Adding front brake fluid ................ 86

13.6 Checking the front brake linings ........ 87

13.7 Changing the brake linings of the

front brake ................................... 87

13.8 Checking the free travel of foot brake

lever ............................................... 90

13.9 Adjusting the basic position of the

foot brake lever ............................ 90

13.10 Checking the rear brake fluid level..... 91

13.11 Adding rear brake fluid ................. 91

13.12 Checking the brake linings of the

rear brake........................................ 93

13.13 Changing the brake linings of the

rear brake .................................... 93

14 WHEELS, TIRES ......................................... 96

14.1 Removing the front wheel .............. 96

14.2 Installing the front wheel .............. 97

14.3 Removing the rear wheel ............... 97

14.4 Installing the rear wheel ................ 98

14.5 Checking the tire condition ............. 100

14.6 Checking tire pressure .................... 100

14.7 Checking spoke tension .................. 101

15 ELECTRICAL SYSTEM ............................... 102

15.1 Removing the 12-V battery .......... 102

15.2 Installing the 12-V battery ........... 103

15.3 Charging the 12-V battery ........... 103

15.4 Changing the main fuse.................. 105

15.5 Removing the headlight mask with

the headlight ................................. 106

15.6 Installing the headlight mask with

the headlight ................................. 106

15.7 Changing the headlight bulb ........... 107

15.8 Changing the turn signal bulb ......... 107

15.9 Checking the headlight setting ........ 108

15.10 Adjusting the headlight range.......... 109

15.11 Changing the combination

instrument battery.......................... 109

16 COOLING SYSTEM .................................... 111

16.1 Cooling system .............................. 111

16.2 Checking the antifreeze and

coolant level.................................. 111

16.3 Checking the coolant level .............. 112

16.4 Draining the coolant ................... 112

16.5 Refilling with coolant .................. 113

17 TUNING THE ENGINE............................... 115

17.1 Checking the throttle cable play ...... 115

17.2 Adjusting the throttle cable

play .......................................... 115

17.3 Carburetor tuning........................... 116

17.4 Carburettor – idle speed.................. 119

17.5 Carburetor – adjusting the idle

speed ........................................ 119

17.6 Ignition curve plug-in connector ...... 120

17.7 Changing the ignition timing map.... 120

17.8 Checking the basic position of the

shift lever...................................... 121

17.9 Adjusting the basic position of the

shift lever .................................. 121

17.10 Engine characteristic – auxiliary

spring ........................................... 122

17.11 Engine characteristic – adjusting

the auxiliary spring ..................... 122

18 SERVICE WORK ON THE ENGINE .............. 124

18.1 Emptying the carburetor float

chamber .................................... 124

18.2 Checking the gear oil level .............. 125

18.3 Changing the gear oil .................. 125

18.4 Adding the gear oil ..................... 126

19 CLEANING, CARE ..................................... 128

19.1 Cleaning the motorcycle ................. 128

19.2 Checks and maintenance steps for

winter operation............................. 129

20 STORAGE................................................. 130

20.1 Storage ......................................... 130

20.2 Preparing for use after storage......... 131

21 TROUBLESHOOTING ................................ 132

22 TECHNICAL DATA..................................... 134

22.1 Engine.......................................... 134

22.2 Engine tightening torques ............... 134

22.3 Carburetor..................................... 137

22.3.1 Carburetor tuning ................... 137

22.4 Capacities ..................................... 138

22.4.1 Gear oil..................................... 138

22.4.2 Coolant..................................... 138

22.4.3 Fuel ......................................... 138

22.5 Chassis ......................................... 138

22.6 Electrical system............................ 139

22.7 Tires............................................. 139

22.8 Fork.............................................. 139

22.9 Shock absorber.............................. 140

22.10 Chassis tightening torques .............. 140

23 SUBSTANCES .......................................... 143

24 AUXILIARY SUBSTANCES ......................... 145

25 STANDARDS ............................................ 147

26 LIST OF ABBREVIATIONS.......................... 148

TABLE OF CONTENTS

27 LIST OF SYMBOLS.................................... 149

27.1 Yellow and orange symbols.............. 149

27.2 Green and blue symbols.................. 149

INDEX ............................................................. 150

1 MEANS OF REPRESENTATION

1.1 Symbols used

The meaning of specific symbols is described below.

Indicates an expected reaction (e.g. of a work step or a function).

Indicates an unexpected reaction (e.g. of a work step or a function).

All work marked with this symbol requires specialist knowledge and technical understanding.

In the interest of your own safety, have these jobs performed by an authorized KTM workshop!

Your motorcycle will be optimally cared for there by specially trained experts using the auxiliary

tools required.

Indicates a page reference (more information is provided on the specified page).

Indicates information with more details or tips.

Indicates the result of a testing step.

Indicates a voltage measurement.

Indicates a current measurement.

Indicates the end of an activity, including potential rework.

1.2 Formats used

The typographical formats used in this document are explained below.

Proprietary name Indicates a proprietary name.

Name

Indicates a protected name.

Brand™ Indicates a brand available on the open market.

Underlined terms Refer to technical details of the vehicle or indicate technical terms, which

are explained in the glossary.

SAFETY ADVICE 2

2.1 Use definition – intended use

This vehicle has been designed and built to withstand the normal stresses and strains of racing. This vehicle com-

plies with the currently valid regulations and categories of the top international motorsports organizations.

Info

This vehicle is only authorized for operation on public roads in the homologated (restricted) version.

The derestricted version of this vehicle must only be operated in closed off areas away from public high-

way traffic.

This vehicle is designed for use in offroad endurance competition, and not primarily for use in motocross.

2.2 Misuse

The vehicle must only be used as intended.

Dangers can arise for people, property and the environment through use not as intended.

Any use of the vehicle beyond the intended and defined use constitutes misuse.

Misuse also includes the use of operating and auxiliary fluids which do not meet the required specification for the

respective use.

2.3 Safety advice

A number of safety instructions need to be followed to operate the product described safely. Therefore read this

instruction and all further instructions included carefully. The safety instructions are highlighted in the text and

are referred to at the relevant passages.

Info

Various information and warning labels are attached in prominent locations on the product described. Do

not remove any information or warning labels. If they are missing, you or others may not recognize dangers

and may therefore be injured.

2.4 Degrees of risk and symbols

Danger

Identifies a danger that will immediately and invariably lead to fatal or serious permanent injury if the

appropriate measures are not taken.

Warning

Identifies a danger that is likely to lead to fatal or serious injury if the appropriate measures are not

taken.

Caution

Identifies a danger that may lead to minor injuries if the appropriate measures are not taken.

Note

Identifies a danger that will lead to considerable machine and material damage if the appropriate measures are

not taken.

Note

Indicates a danger that will lead to environmental damage if the appropriate measures are not taken.

2 SAFETY ADVICE

2.5 Tampering warning

Tampering with the noise control system is prohibited. Federal law prohibits the following acts or the causing

thereof:

1 The removal or rendering inoperative by any person other than for purposes of servicing, repair, or replace-

ment, of any device or element of design incorporated into any new vehicle for the purpose of noise control

prior to its sale or delivery to the ultimate purchaser or while it is in use, or

2 the use of the vehicle after such device or element of design has been removed or rendered inoperative by any

person.

Among those acts presumed to constitute tampering are the acts listed below:

1 Removal or puncturing of the main silencers, baffles, header pipes or any other components which conduct

exhaust gases.

2 Removal or puncturing of parts of the intake system.

3 Lack of proper maintenance.

4 Replacing moving parts of the vehicle, or parts of the exhaust system or intake system, with parts other than

those specified by the manufacturer.

2.6 Safe operation

Danger

Danger of accidents A rider who is not fit to ride poses a danger to him or herself and others.

– Do not operate the vehicle if you are not fit to ride due to alcohol, drugs or medication.

– Do not operate the vehicle if you are physically or mentally impaired.

Danger

Danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and death.

– Always make sure there is sufficient ventilation when running the engine.

– Use effective exhaust extraction when starting or running the engine in an enclosed space.

Warning

Danger of burns Some vehicle components become very hot when the vehicle is operated.

– Do not touch any parts such as the exhaust system, radiator, engine, shock absorber, or brake system

before the vehicle parts have cooled down.

– Let the vehicle parts cool down before you perform any work on the vehicle.

Only operate the vehicle when it is in perfect technical condition, in accordance with its intended use, and in a

safe and environmentally compatible manner.

The vehicle should only be used by trained persons. An appropriate driver's license is needed to drive the vehicle

on public roads.

Have malfunctions that impair safety promptly eliminated by an authorized KTM workshop.

Adhere to the information and warning labels on the vehicle.

SAFETY ADVICE 2

2.7 Protective clothing

Warning

Risk of injury Missing or poor protective clothing presents an increased safety risk.

– Wear appropriate protective clothing such as helmet, boots, gloves as well as trousers and a jacket

with protectors on all rides.

– Always wear protective clothing that is in good condition and meets the legal regulations.

In the interest of your own safety, KTM recommends that you only operate the vehicle while wearing protective

clothing.

2.8 Work rules

Special tools are necessary for certain tasks. The tools are not a component of the vehicle, but can be ordered

using the number in parentheses. Example: bearing puller (15112017000)

During assembly, use new parts to replace parts which cannot be reused (e.g. self-locking screws and nuts, seals,

sealing rings, O-rings, pins, and lock washers).

In the case of certain screws, a screw adhesive (e.g. Loctite

) is required. Observe the manufacturer's instruc-

tions.

If thread locker (e.g., Precote

) has already been applied to a new part, do not apply any additional thread locker.

After disassembly, clean the parts that are to be reused and check them for damage and wear. Change damaged

or worn parts.

After completing a repair or service work, check the operating safety of the vehicle.

2.9 Environment

If you use your motorcycle responsibly, you can ensure that problems and conflicts do not occur. To protect the

future of the motorcycle sport, make sure that you use your motorcycle legally, display environmental conscious-

ness, and respect the rights of others.

When disposing of used oil, other operating and auxiliary fluids, and used components, comply with the laws and

regulations of the respective country.

Because motorcycles are not subject to the EU regulations governing the disposal of used vehicles, there are no

legal regulations that pertain to the disposal of an end-of-life motorcycle. Your authorized KTM dealer will be glad

to advise you.

2.10 Owner's Manual

It is important that you read this Owner's Manual carefully and completely before making your first trip. The Own-

er's Manual contains useful information and many tips on how to operate, handle, and service your motorcycle.

Only then will you find out how to customize the vehicle ideally for your own use and how you can protect yourself

from injury.

Keep the Owner's Manual in an accessible place to enable you to refer to it as needed.

If you would like to know more about the vehicle or have questions on the material you read, please contact an

authorized KTM dealer.

The Owner's Manual is an important component of the vehicle and must be handed over to the new owner if the

vehicle is sold.

The Owner's Manual is also available for download from your authorized KTM dealer and on the KTM website.

International KTM Website: http://www.ktm.com

3 IMPORTANT NOTES

3.1 Manufacturer and implied warranty

The work prescribed in the service schedule must only be carried out in an authorized KTM workshop and con-

firmed in the KTM Dealer.net, as otherwise all warranty claims will be void. Damage or secondary damage caused

by tampering with and/or conversions on the vehicle are not covered by the manufacturer warranty.

3.2 Fuel, auxiliary substances

Note

Environmental hazard Improper handling of fuel is a danger to the environment.

– Do not allow fuel to enter the groundwater, the soil, or the sewage system.

Use fuels and auxiliary substances in accordance with the Owner's Manual and specification.

3.3 Spare parts, accessories

For your own safety, only use spare parts and accessory products that are approved and/or recommended by KTM

and have them installed by an authorized KTM workshop. KTM accepts no liability for other products and any

resulting damage or loss.

Certain spare parts and accessory products are specified in parentheses in the descriptions. Your authorized KTM

dealer will be glad to advise you.

The current KTM PowerParts for your vehicle can be found on the KTM website.

International KTM Website: http://www.ktm.com

3.4 Service

A prerequisite for perfect operation and prevention of premature wear is that the service, care, and tuning work

on the engine and chassis is properly carried out as described in the Owner's Manual. An incorrect suspension

setting can lead to damage and breakage of chassis components.

Use of the vehicle under difficult conditions, such as on sand or on wet and muddy surfaces, can result in signif-

icantly increased wear of components, such as the drive train, brake system, or suspension components. For this

reason, it may be necessary to inspect or replace parts before the next scheduled service.

It is imperative that you adhere to the stipulated run-in times and service intervals. If you observe these exactly,

you will ensure a much longer service life for your motorcycle.

The relevant mileage or time interval is whichever occurs first.

3.5 Figures

The figures contained in the manual may depict special equipment.

In the interest of clarity, some components may be shown disassembled or may not be shown at all. It is not

always necessary to disassemble the component to perform the activity in question. Please follow the instructions

in the text.

3.6 Customer service

Your authorized KTM dealer will be happy to answer any questions you may have on your vehicle and KTM.

A list of authorized KTM dealers can be found on the KTM website.

International KTM Website: http://www.ktm.com

VIEW OF VEHICLE 4

4.1 View of vehicle, front left (example)

S03662-10

Hand brake lever ( p. 15)

Light switch ( p. 16)

Switch-off button ( p. 15)

Turn signal switch ( p. 16)

Horn button ( p. 16)

Clutch lever ( p. 15)

Chain guide

Air filter box cover

Side stand ( p. 20)

Shift lever ( p. 19)

Fuel tap ( p. 18)

4 VIEW OF VEHICLE

4.2 View of vehicle, rear right (example)

S03661-10

Fuel tank filler cap

Throttle grip ( p. 15)

Vehicle identification number ( p. 13)

Foot brake lever ( p. 19)

Level viewer for brake fluid, rear

SERIAL NUMBERS 5

5.1 Vehicle identification number

401945-10

The vehicle identification number

is stamped on the right side

of the steering head.

5.2 Type label

401946-10

Type label

is fixed to the front of the steering head.

5.3 Key number

402247-10

The key number

for the steering lock is stamped onto the key

connector.

5.4 Engine number

H01047-10

The engine number

is located on the left side of the engine

over the engine sprocket.

5 SERIAL NUMBERS

5.5 Fork part number

401947-10

The fork part number

is stamped on the inside of the axle

clamp.

5.6 Shock absorber article number

H02222-10

Shock absorber article number

is stamped on the top of the

shock absorber above the adjusting ring towards the engine side.

CONTROLS 6

6.1 Clutch lever

S03609-10

Clutch lever

is fitted on the handlebar on the left.

The clutch is activated hydraulically and adjusts itself automati-

cally.

6.2 Hand brake lever

S03610-10

Hand brake lever

is fitted on the right side of the handlebar.

The front brake is engaged using the hand brake lever.

6.3 Throttle grip

S03611-10

Throttle grip

is fitted on the right side of the handlebar.

6.4 Switch-off button

S03612-10

Switch-off button

is fitted on the left side of the handlebar.

Possible states

• The switch-off button is in the basic position – In this

position, the ignition circuit is closed and the engine can be

started.

• The switch-off button is pressed – In this position, the igni-

tion circuit is interrupted, a running engine stops, and a non-

running engine will not start.

6 CONTROLS

6.5 Horn button

S03612-11

Horn button

is fitted on the left side of the handlebar.

Info

The horn button has no function when the vehicle is deliv-

ered.

Possible states

• The horn button is in the basic position

• The horn button is pressed – The horn is operated in this

position.

6.6 Light switch

S03613-10

Light switch

is fitted on the left side of the handlebar.

Possible states

Low beam on – Light switch is in the central posi-

tion. In this position, the low beam and tail light are

switched on.

High beam on – Light switch is turned to the left.

In this position, the high beam and the tail light are

switched on.

6.7 Turn signal switch

S03612-12

Turn signal switch

is fitted on the left side of the handlebar.

Possible states

Turn signal off – The turn signal switch is in the cen-

tral position.

Left turn signal, on – The turn signal switch is turned

to the left.

Right turn signal, on – The turn signal switch is

turned to the right.

6.8 Emergency OFF switch

S03614-11

The emergency OFF switch

is fitted on the right side of the

handlebar.

Possible states

Ignition off – In this position, the ignition circuit

is interrupted, a running engine stops, and a

non-running engine will not start.

Ignition on – In this position, the ignition circuit is

closed, and the engine can be started.

CONTROLS 6

6.9 Start button

S03614-10

Start button

is fitted on the right side of the handlebar.

Possible states

• The start button is in the basic position

• The start button is pressed – In this position, the starter

motor is actuated.

6.10 Overview of indicator lamps

E00314-01

Possible states

The high beam indicator lamp lights up blue – The

high beam is switched on.

Malfunction indicator lamp – inoperative

Fuel level warning lamp – inoperative

Turn signal indicator lamp flashes green – The turn

signal is switched on.

6.11 Opening the fuel tank filler cap

Danger

Fire hazard Fuel is highly flammable.

The fuel in the fuel tank expands when warm and can escape if overfilled.

– Do not refuel the vehicle in the vicinity of open flames or lit cigarettes.

– Switch off the engine for refueling.

– Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.

– If any fuel is spilled, wipe it off immediately.

– Observe the specifications for refueling.

Warning

Danger of poisoning Fuel is poisonous and a health hazard.

– Avoid skin, eye and clothing contact with fuel.

– Immediately consult a doctor if you swallow fuel.

– Do not inhale fuel vapors.

– In case of skin contact, rinse the affected area with plenty of water.

– Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.

– Change your clothing in case of fuel spills on them.

– Keep fuels correctly in a suitable canister, and out of the reach of children.

Note

Environmental hazard Improper handling of fuel is a danger to the environment.

– Do not allow fuel to enter the groundwater, the soil, or the sewage system.

6 CONTROLS

S03647-10

–

Press release button

, turn the fuel tank filler cap counter-

clockwise, and lift it off.

6.12 Closing the fuel tank filler cap

S03647-11

– Mount the fuel tank filler cap and turn it clockwise until

release button

engages.

Info

Route fuel tank breather hose

without kinks.

6.13 Fuel tap

K01202-10

The fuel tap is on the left side of the fuel tank.

Open or close the fuel supply to the carburetor using tap han-

dle

on the fuel tap.

Possible states

• Fuel supply closed OFF – Fuel cannot flow from the fuel tank

to the carburetor.

• Open fuel supply ON – Fuel can flow from the fuel tank to the

carburetor. The fuel tank empties down to the reserve level.

• Fuel reserve supply open RES – Fuel can flow from the fuel

tank to the carburetor. The fuel tank empties completely.

Page is loading ...

KTM 300 EXC 2020 Owner's manual

Brand: KTM

Model: 300 EXC 2020

Category: Motorcycles

Type: Owner's manual

This manual is also suitable for

300 EXC BR 2020

Download PDF

report

KTM 300 EXC 2020 Owner's manual

This manual is also suitable for

KTM 300 EXC 2020 Owner's manual

Related papers

Other documents