Shure RMCE-LTG User guide

Type
User guide

Shure RMCE-LTG, your new Lightning accessory cable, connects iOS devices to Shure earphones and headphones. Control music playback, adjust volume, skip tracks, and answer calls using the three-button remote with built-in microphone. Experience legendary Shure quality and reliability with this durable cable designed for continued functionality.

Shure RMCE-LTG, your new Lightning accessory cable, connects iOS devices to Shure earphones and headphones. Control music playback, adjust volume, skip tracks, and answer calls using the three-button remote with built-in microphone. Experience legendary Shure quality and reliability with this durable cable designed for continued functionality.

Lightning Accessory Cable
Shure Lightning
®
cables are designed for continued functionality between
iOS devices and your Shure earphones and headphones. They feature a
Lightning connector and three button controls with in-line microphone for
phone calls and voice applications.
Features
Lightning
®
cable adapter
Three button control functionality
In-line microphone
Legendary Shure quality and reliability
Using the Remote Control
Click the center button oncePlay music
Click the center button once.Pause music
Click the volume up (+) or volume
down (-) buttons to increase or
decrease volume.
Adjust volume
Double-click the center button.Go to next track
Triple-click the center button.Go to previous track
Triple-click after 6 seconds.Restart current track
Double-click and hold the center
button.
Fast-forward
Click the center button once.Send/End Call
Visit www.shure.com for more information.
Product firmware may periodically be updated through the Shure app. The
app will provide update instructions.
Specifications
Connector
Lightning
Housing
ABS plastic with TPE strain-relief.
Maximum Cable Length
50 in.
Cable Diameter
3 mm
Net Weight
0.7oz.
Certifications
Note:Testing is based on the use of supplied and recommended cable types.
The use of other than shielded (screened) cable types may degrade EMC
performance.
This product meets the Essential Requirements of all relevant European di-
rectives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from:
www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
1/2©2017 Shure Incorporated
RMCE-LTG
Shure Remote + Mic Lightning Cable
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
"Made for iPod," "Made for iPhone," and "Made for iPad" mean that an elec-
tronic accessory has been designed to connect specifically to iPod, iPhone,
or iPad, respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this
device or its compliance with safety and regulatory standards. Please note
that the use of this accessory with iPod, iPhone, or iPad may affect wireless
performance.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod touch, and Retina are
trademarks of Apple Inc., registered in the U.S. and other countries. iPad Air
and iPad mini are trademarks of Apple Inc. The trademark "iPhone" is used
with a license from Aiphone K.K.
Mac
®
and Lightning
®
are registered trademarks of Apple Inc.
Shure Incorporated
RMCE-LTG Shure Remote + Mic Lightning
®
Cable
2/2
Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: +1-847-600-2000 Email: inf[email protected]
  • Page 1 1
  • Page 2 2

Shure RMCE-LTG User guide

Type
User guide

Shure RMCE-LTG, your new Lightning accessory cable, connects iOS devices to Shure earphones and headphones. Control music playback, adjust volume, skip tracks, and answer calls using the three-button remote with built-in microphone. Experience legendary Shure quality and reliability with this durable cable designed for continued functionality.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI