Tripp Lite Conduit Box Installation guide

Hello! I am an AI chatbot trained to assist you with the Tripp Lite Conduit Box Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Conduit Box

Installation Instructions

1. Remove the terminal

block cover located

on the top-front of

the UPS to access the

UPS system’s input,

output and grounding

connection terminals.

2. The terminal block cover

will be replaced with the

terminal conduit box

found inside the UPS (see

illustration).

3. Prepare the terminal box

cover with circular cutouts

to allow wiring conduits to

pass through.

4. Attach the terminal

box cover to the top of

the UPS system after

ﬂexible conduit has been

attached.

Notes:

• Make sure the wires are tightly

connected to the terminals.

• Cabling should be protected

by ﬂexible conduit and routed

through the appropriate

knockouts in the terminal

block cover.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Example of conduit

box with circular

cutouts installed

Example of conduit

box located inside

UPS frame

Español 2 • Français 3 • Русский 4

17-03-265-9336D4.indb 1 3/30/2017 2:44:45 PM

Page is loading ...