a. For first use, take the earbuds out of the package. Then press and hold the touch panel
of the left and right earbuds simultaneously to power on the earbuds. The LEDs of the
earbuds light up, and the voice prompt of ‘Power on’ occurs from the earbuds.
If you remove the earbuds from the charging case after charging, the left and right earbuds
turn on automatically.
b. The left and right earbuds connect each other automatically. The voice prompt of ‘Left
channel’ and ‘Right channel’ occurs from the left earbud and right earbud respectively.
c. The LED of the left earbud flashes blue and red alternatively, indicating that the earbuds
are ready to connect with smartphone.
d. Turn on Bluetooth on your smartphone to search for the earbuds named ‘TWE-60_L’.
e. Select ‘TWE-60_L’ to pair your smartphone with the earbuds. Enter ‘0000’ if prompted
for password. When successfully paired, the voice prompt of ‘connected’ occurs.
The earbuds re-connect with your smartphone automatically after pairing.
Notes:
- The left earbud is the main earbud, and the right earbud is the slave earbud.
- When putting the right earbud back into the charging case, the right earbud turns off
automatically, and the left earbud remains on and connected with your smartphone.
- When putting the left earbud back into the charging case, the left earbud turns off
automatically, and the right earbud is disconnected with your smartphone.
- When putting the left and right earbuds back into the charging case simultaneously, both
earbuds turn off automatically, and are disconnected with your smartphone.
- The left or right earbud can be used alone to connect with your smartphone, and thus only
mono sound is available. Stereo sound is only available using the left and right earbuds in
pair.
Page 4
2. Charging earbuds
a. Put the earbuds into the charging case, and the earbuds are charged automatically until fully
charged.
b. During charging, press once the ON/OFF button on the charging case to display the battery
capacity level.
c. During charging, press twice the ON/OFF button on the charging case. The LED on the
charging case turns off and the earbuds charging stops.