EN EN
Connecting to a Digital Audio System
AV receiver / amplier
audio
digital audio
coaxial input jack
digital audio coaxial cable
(not supplied)
this unit
AUDIO OUTPUT (DIGITAL OPTICAL/COAXIAL)
digital audio optical cable
(not supplied)
digital audio
optical input jack
DIGITAL AUDIO INPUT
COAXIAL
DIGITAL AUDIO INPUT
OPTICAL
or
Network Connection with LAN
You can use a disc which o ers BD-Live function by connecting the unit to the Internet.
(For BD-Live information, please refer to page 29 in the Instruction Manual)
LAN
NALNAW
12345
Hub or broadband router
Telecommunications
equipment (modem, etc.)
Internet
LAN cable
this unit
LAN cable
Connecting the AC Cord
After you made all necessary connections, connect the AC cord to the AC INLET. Then connect the AC cord to the AC outlet.
Insert the plugs securely. Incomplete connections will result in the generation of noise.
this unit
AC cordAC 120V, 60 Hz
AC outlet
Playback
1
Press [On / Standby I /
Q
].
2
Turn on the TV and select the appropriate input on the TV to which the unit is connected.
3
Press [Open / Close
A
] to open disc tray.
4
Place the disc on the disc tray with its label side facing up.
Align the disc to the disc
tray guide.
5
Press [Open / Close
A
] to close the disc tray.
It may take a while to load the disc.
• Some discs may start playback automatically.
6
Press [Play
B
] to start playback.
• For many of BD-video and DVD-video, a menu screen may appear.
• In this case, use [
K
/
L
/
{
/
B
] to select the desired item, then press [Enter].
To pause playback:
Press [Pause
k
].
To return to normal playback:
Press [Play
B
].
To stop playback:
Press [Stop
C
].
To eject the disc:
Press [Open / Close
A
] to open the disc tray, then
remove the disc before turning o the unit.