WIRING DIAGRAM
This player is equipped with ISO standard connector, please follow below instruction:
● Yellow – 12 V Constant
● Black – Ground wire
● Blue - Power Antenna / Remote Amp Turn On
● Orange – Back-Up Camera Trigger (+)
● Pink – Parking Brake (-)
● White/White black - Left front speaker (+-)
● Purple/Purple black - Right rear speaker (+/-)
● Green/Green black - Left rear speaker (+/-)
● Red - ACC ON (+12V)
● Grey/Grey black - Right front speaker (+/-)
Note:
The “PARKING BRAKE” wire must be connected to the parking brake system
of your car. When the parking brake is engages, the LCD will be allowed to view
your video. If not, the screen will produce an image saying, “PARKING BRAKE”.
This is a safety feature designed for the driver not to watch a video while driving.
The video output on this unit will not be affected by this.
A Jack
1
9
2
10
3
11 12
5
13
6
14
7
15
8
16
4
1. Yellow BATT
2. Blue phone mute
3. Orange reverse rear view control
4. NC
5. Purple/black RR-
6. Grey/black FR-
7. White/black
FL-
8. Green/black
RL-
9. Black ground
10.Red key switch power
11.Brown brake detecting
(optional)
12.Blue power antenna control
13.Purple RR+
14.Grey FR+
15.White
FL+
16.Green
RL+
B Jack:
Dark grey with white tip:Audio output (front left)
Dark grey with red tip:Audio output (front right)
Light grey with white tip:Audio output ( left rear)
Light grey with red tip:Audio output (right rear)
Light grey with yellow tip:Video output
Black with White tip: AUX input (left)
Black with red tip: AUX input (right)
Blue with white tip: Dual audio output (left)
Blue with red tip: Dual audio output (right)
Black with yellow tip: Video input
Orange with yellow tip: rearview input
Orange with orange tip: Digital audio output
Brown with brown tip: Subwoofer output
Black with black tip : Radio antenna
(Optional)
(Optional)
(Optional)
(Optional)