Toyota Camry HV Reference guide

Brand: Toyota

Model: Camry HV

Category: Cars

Type: Reference guide

Printed in U.S.A. 9/19

19 -MKG -135 89

Quick Reference Guide 2020

toyota.com

QUICK

REFERENCE

GUIDE

2020

CAMRY HYBRID

2020

This Quick Reference Guide is a summary of basic vehicle

operations. It contains brief descriptions of fundamental

operations so you can locate and use the vehicle’s main

equipment quickly and easily.

The Quick Reference Guide is not intended as a substitute for

the Owner’s Manual located in your vehicle’s glove box. We

strongly encourage you to review the Owner’s Manual and sup-

plementary manuals so you will have a better understanding of

your vehicle’s capabilities and limitations.

Your dealership and the entire staff of Toyota Motor North

America, Inc. wish you many years of satised driving in your

new Camry Hybrid.

A word about safe vehicle operations

This Quick Reference Guide is not a full description of Camry Hybrid

operations. Every Camry Hybrid owner should review the Owner’s Manual that

accompanies this vehicle.

Pay special attention to the boxed information highlighted in color throughout

the Owner’s Manual. Each box contains safe operating instructions to help you

avoid injury or equipment malfunction.

All information in this Quick Reference Guide is current at the time of printing.

Toyota reserves the right to make changes at any time without notice.

OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES

INDEX

Engine maintenance 8

Fuel tank door release & cap 7

Hood release 8

Indicator symbols 4-5

Instrument cluster 4

Instrument panel 2-3

Instrument panel light control 8

Keyless entry

1,2

Smart Key system

1,2

Visit your Toyota dealer for information on customizing this feature.

Programmable by customer. Refer to the Owner’s Manual for instructions and more information.

HomeLink

is a registered trademark of Gentex Corporation.

OVERVIEW

FEATURES & OPERATIONS

SAFETY & EMERGENCY FEATURES

BLUETOOTH® DEVICE

PAIRING SECTION 44-46

Audio 24

Auto lock/unlock

1,2

Air conditioning/heating 16

Bird’s Eye View Camera

with Perimeter Scan function 19

Blind Spot Monitor with Rear

Cross Trafc Alert (BSM w/RCTA) 18

Bottle holders/Cup holders 26

Clock 27

Color Head-Up Display (HUD) 21

Door locks 23

Drive mode switches 12

EV drive mode 12

Electric parking brake 11

Garage door opener (HomeLink

)

Hybrid Synergy Drive System 9

Hybrid transmission 10

Lights

& turn signals 14

Moonroof 21

Multi-Information Display (MID)

Power outlet-12V DC 22

Qi Wireless charging 26

Rear view monitor system 19

Seat adjustments-Front 13

Seat folding-Rear 13

Seat heaters/ventilators 17

Seats-Head restraints 13

Floor mat installation 43

Rear door child safety locks 39

Safety Connect

Seat belts 39

Seat belts-Shoulder belt anchor 39

Spare tire & tools 41

Star Safety System

™

42-43

Trunk-Internal release 41

Tire Pressure Monitoring

(warning) System (TPMS) 40

FEATURES & OPERATIONS (continued)

TOYOTA SAFETY SENSE™ P (TSS-P)

Steering lock release 23

Steering wheel switches

(Audio & phone: Bluetooth

) 25

Tilt and telescopic steering wheel 15

USB charge-ports 22

USB media port 22

Vehicle Stability Control (VSC)/

TRAC OFF switch 12

Windows - Power 23

Windshield wipers & washers 15

Automatic High Beams (AHB) 38

Full-Speed Range Dynamic

Radar Cruise Control (DRCC) 35-37

Lane Departure Alert with

Steering Assist (LDA w/SA) 31-34

Pre-Collision System with

Pedestrian Detection (PCS w/PD) 29-31

Quick overview-

Toyota Safety Sense

™

P (TSS-P) 28

Sensors 28

Steering wheel controls

OVERVIEW

Instrument panel

Tilt and telescopic steering lock release lever

(below the steering wheel)

Headlight/turn signal/fog light control

Automatic High Beam (AHB) switch

VSC OFF switch

Bird’s Eye View Camera ON switch

1,2

Trunk opener switch

Fuel tank door release switch

Odometer/trip meter

Instrument panel light control switch

“STOP/START/ENGINE” button

Hood lock release lever

Dynamic Radar Cruise

Control (DRCC) or Cruise

control switch

Dynamic Radar Cruise Control

(DRCC) vehicle-to-vehicle distance

button

Lane Departure Alert with Steering

Assist (LDA w/SA) switch

Audio volume

control switches

Telephone switch

Audio remote control

switches

Windshield wiper and washer control

Meters/Multi-Information Display (MID)

Meter control switches

Voice command switch

Paddle shifters

OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES

If equipped.

For details, refer to the “Navigation and Multimedia System Owner’s Manual” or visit www.

toyota.com/audio-multimedia for additional resources.

Emergency flasher switch

Air conditioning/heating controls

EV drive mode switch

Electric parking brake switch

Driving mode select switches

Seat heaters

/ventilators

switches

Audio/Navigation system

1,2

Qi Wireless charger switch

Brake hold switch

For details, refer to “Indicators and warning lights,” Section 2, 2020 Owner’s

Manual.

Anti-lock Brake System warning

Airbag SRS warning

OVERVIEW

Instrument cluster

Automatic High Beam (AHB) indicator

Auto Glide Control (AGC) indicator

Blind Spot Monitor (BSM) indicator

AIRBAG ON/OFF indicator Type A

AIRBAG ON/OFF indicator Type B

Indicator symbols

Hybrid System Indicator

Outside temperature

Speedometer

Odometer/trip meter

Shift position

Fuel gauge

Multi-information display

Engine coolant temperature gauge

Instrument panel light control

Service indicators and reminders

4.2-inch display

7-inch display

OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES

Brake system warning

Malfunction/

Check Engine indicator

Low Tire Pressure Warning

Low fuel level warning

Security indicator

Fuel tank door position

READY indicator

Master warning

1,2

Headlight low/high beam

indicators

Turn signal indicator

Pre-Collision System (PCS)

warning light

1,2

Lane Departure Alert (LDA) indicator

(white/green/yellow

indicator)

Slip indicator

1,3

Vehicle Stability Control OFF indicator

Parking brake indicator

Electric power steering warning

(red/yellow indicator)

Rear passenger seat belt reminder

indicator Type A

Rear passenger seat belt reminder

indicator Type B

Electric brake hold operated indicator

1,2

Electric brake hold standby indicator

BSM w/Rear Cross Traffic Alert (RCTA)

Indicator

BSM outside rear view mirror

indicators

Sport mode driving indicator

ECO MODE indicator

EV drive mode indicator

EV indicator

Low outside temperature indicator

Brake system warning

(yellow indicator)

Full-Speed Dynamic Radar Cruise

Control (DRCC) indicator/DRCC

SET indicator

Constant speed cruise control

indicator/Constant speed

cruise control SET indicator

Driver’s and front passenger’s seat belt

reminder (alarm will sound when the

engine switch is in the “IGNITION ON”

mode)

If the indicator does not turn off within a few seconds of starting the Hybrid System, there may be a

malfunction. Have the vehicle inspected by your Toyota dealer.

If the indicator flashes, there may be a malfunction. Refer to the Owner’s Manual.

If the indicator flashes, it indicates that the system is operating.

If equipped.

Carry Smart

Key remote

Carry Smart

Key remote

Carry Smart

Key remote

LOCKING OPERATION

UNLOCKING OPERATION

TRUNK LID

PANIC BUTTON

NOTE: If a door is not opened within 60 seconds of unlocking, all doors will

relock for safety.

OVERVIEW

Keyless entry

All-door lock

Touch

Grasp

Driver door unlock*

Push

ONCE: Driver door

TWICE: All doors

Push

Push and hold

* Driver door unlocking function can be programmed to unlock driver door only,

or all doors. In some models, grasping front passenger door handle will unlock all

doors. Please refer to the Owner’s Manual for more details on how to program the

doors.

NOTE: Doors may also be locked/unlocked using remote.

Push

START FUNCTION

Fuel tank door release & cap

Smart key system

NOTE: Tighten until one click is heard.

If the cap is not tightened enough,

Check engine “

” indicator may

illuminate.

Turn to open

Store

Push

OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES

POWER (WITHOUT STARTING HYBRID SYSTEM)

Without depressing the brake pedal, pressing the “POWER” button will change

the operation mode in succession from:

NOTE: The Smart Key must be carried to enable the start function. With the

Park position selected and the brake pedal depressed, push the “POWER”

switch.

Depress

brake pedal

Push

Carry remote

to start

Off - All systems OFF. Emergency flashers can be used.

Accessory – Some electrical components can be used.

On - All electrical components can be used.

OVERVIEW

Hood release

Engine maintenance

Instrument panel light control

Push to control brightness

Windshield washer fluid tank

Engine oil level dipstick

Engine coolant reservoir

Engine oil filler cap

NOTE: Regularly scheduled maintenance, including oil changes, will help

extend the life of your vehicle and maintain performance. Please refer to the

“Warranty Maintenance Guide.”

Pull up latch and raise hood

Pull

Push

Darker Brighter

OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES

TIPS FOR IMPROVED FUEL ECONOMY

STARTING YOUR VEHICLE

NOTE: Fuel consumption and energy information of the Hybrid System are

shown on the Multi-information display (MID) screen or the navigation system.

The Hybrid Synergy Drive System utilizes a computer-controlled gasoline engine

and electric motor to provide the most efficient combination of power for the vehicle.

To conserve energy, when the brakes are applied the braking force generates

electricity which is then sent to the traction battery. In addition, the engine shuts off

when the vehicle is stopped. The benefits are better fuel economy, reduced vehicle

emissions and improved performance.

- Ensure tire pressures are maintained at levels specified in the Owner’s Manual.

- When possible, link trips to reduce engine cold starts.

- Avoid driving at speeds that are higher than necessary, especially on the highway.

- When possible, avoid sudden stops to maximize regenerative braking energy.

- Minimize use of the air conditioning.

FEATURES & OPERATIONS

Hybrid Synergy Drive System

1. Put the selector lever in “P.”

2. Depress the brake pedal, and “

” will be displayed on the Multi-Information

Display (MID).

3. Press the “POWER” switch briefly and firmly.

4. The “READY” light will blink. After a few seconds, when the light remains steady

and a beep sounds, you may begin driving.

Hybrid transmission

Auto lock/unlock

FEATURES & OPERATIONS

Automatic door locks can be programmed to operate in different modes, or turned

OFF.

Shift position linked door locking/unlocking function

-Doors lock when shifting from Park.

-Doors unlock when shifting into Park.

Speed linked door locking function

-Doors lock when the vehicle speed goes above approximately 12 mph (20 km/h).

Driver’s door linked door unlocking function

-Doors unlock when the engine switch is set to OFF and driver’s door is opened.

Refer to the Owner’s Manual for more details.

Shift the shift lever to “S” position from “D” position.

Downshifting increases power going uphill, or provides engine braking downhill. For

best fuel economy during normal driving conditions, always drive with the shift lever

in the “D” position.

* The “POWER” switch must be in the “IGNITION ON” mode and the brake pedal

depressed to shift from Park.

“S” (SEQUENTIAL) MODE

+ (“S” mode)

Shift lever

Paddle shifters*

*If equipped

- (“S” mode)

+ (“S” mode)

Park*

Reverse

Neutral

Drive

“S” mode

Shift lever type:

+ : Upshift (push and release)

- : Downshift (pull and release)

Paddle shifters type (if equipped):

+ : Upshift (pull and release)

- : Downshift (pull and release)

OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES

Electric parking brake (if equipped)

Automatic (shift lever operation)

To turn automatic mode ON, while vehicle is stopped, pull and hold switch until

“EPB Shift Interlock Function Activated” displays in Multi-Information Display (MID).

While depressing brake, shifting into P position will automatically set the brake

and turn the parking brake indicator and parking brake light on. To release brake,

depress brake and shift out of P. The indicator light turns off.

To turn automatic mode OFF, push and hold parking brake switch until “EPB Shift

Interlock Function Deactivated” displays on the MID.

Manual

While vehicle is stopped and brake pedal is depressed, pull to set parking brake

and turn the parking brake indicator and parking brake light on. To release, press

the brake pedal and push switch. The indicator light turns off.

Refer to the Owner’s Manual for limitations and more details.

Parking brake light

Standby indicator Operated indicator

PARKING BRAKE

The brake hold system keeps the brake applied when the shift lever is in D, S or N

with the system on and the brake pedal has been depressed to stop the vehicle.

The system releases the brake when the accelerator pedal is depressed with the

shift lever in D or S to allow smooth start off.

Refer to the Owner’s Manual for limitations and more details.

BRAKE HOLD

Driver side

Automatic mode

Manual mode

EV drive mode

Vehicle Stability Control (VSC)/TRAC OFF Switch

FEATURES & OPERATIONS

Drive mode select switches

Use EV drive mode when driving short distances to reduce noise late at night in

residential areas or to cut emissions when parking in a small garage or underground

car park.

The VSC OFF switch can be used to help free a stuck vehicle in surroundings like

mud, dirt or snow. While the vehicle is stopped, press switch to disable the TRAC

system.

To disable both VSC and TRAC systems, press and hold the switch for at least 3

seconds.

Refer to the Owner’s Manual for limitations and more details.

Normal -

Suitable for normal driving.

SPORT mode -

Use when a higher level

of response is desired,

such as when driving in

mountainous regions.

ECO MODE -

Helps achieve lower fuel

consumption during trips

that involve frequent

accelerating and braking.

Refer to the Owner’s Manual for more details.

Seat adjustments - Front

Seats - Head restraints

Seat folding - Rear

(1) (2)

Tip: To fold rear seats, the release button is located in the trunk.

OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES

Seat position (forward/backward)

Seat cushion angle

Height crank (driver side only)

Seatback angle

Lumbar support

(if equipped,

driver side only)

Height crank (driver side only)

Seatback angle

Seat position (forward/backward)

MANUAL SEAT (IF EQUIPPED)

POWER SEAT (IF EQUIPPED)

Lock release button

Pull

Fold down

Refer to the Owner’s Manual for more details.

HEADLIGHTS

TURN SIGNALS

Lights & turn signals

FEATURES & OPERATIONS

The right hand signals will flash three times.

The left hand signals will flash three times.

Parking lights

Headlights

DRL OFF

AUTO

High beam

flasher

Right turn

Lane change

Left turn

Daytime Running Light system (DRL) Automatically turns on under certain

conditions to make vehicle more visible to other drivers. Not for use at night.

Automatic light cut off system Automatically turns lights off after 30 second delay,

or lock switch on remote is pushed after locking.

Automatic High Beam (AHB) system Automatically switches between high and low

beams as appropriate to enhance vision at night.

Refer to Toyota Safety Sense

™

P (TSS-P) in this guide or the Owner’s Manual for

more details on the Automatic High Beam feature.

* Operating conditions must be met. Refer to the Owner’s Manual for details.

High beam

Automatic High Beam*

Low beam

* Intermittent windshield wiper frequency adjustment Rotate to increase/decrease

wipe frequency.

Refer to the Owner’s Manual for more details.

Windshield wipers & washers

OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES

Hold wheel, push lever down, set angle and length, and return lever.

NOTE: Do not attempt to adjust while the vehicle is in motion.

Tilt and telescopic steering wheel

Lock release lever

Angle

Adjust frequency*

Pull to wash and wipe

Mist

Interval wipe

Slow

Fast

FEATURES & OPERATIONS

Air conditioning/heating

Temperature selector

(driver side)

Temperature selector

(driver side)

Automatic climate control ON -

Adjusting the temperature setting

will cause the airflow vents, air intake

and fan to adjust automatically to set

temperature.

Automatic climate control ON -

Adjusting the temperature setting

will cause the airflow vents, air intake

and fan to adjust automatically to set

temperature.

“SYNC” button - Indicator ON: Synchronized

temperature settings for driver and pas-

sengers. Indicator OFF: Separate temperature

settings for driver and passengers.

“SYNC” button - Indicator ON: Synchronized

temperature settings for driver and pas-

sengers. Indicator OFF: Separate temperature

settings for driver and passengers.

Airflow mode display

Airflow vent mode - In “

” or “ ”

mode, use outside air (“ ” indicator

OFF) to reduce window fogging.

Airflow vent mode - In “ ” or “ ”

mode, use outside air (“ ” indicator

OFF) to reduce window fogging.

Temperature selector

(passenger side)

Temperature selector

(passenger side)

“S-FLOW” mode

Recirculate cabin air

(outside air when OFF)

Recirculate cabin air

(outside air when OFF)

Outside rearview mirror

(if equipped)/Rear defogger

Outside rearview mirror

(if equipped)/Rear defogger

Climate control OFF

Air Conditioning ON/OFF

Fan speed

Windshield airflow/defogger

Type A

Type B

OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES

SEAT VENTILATORS (IF EQUIPPED)

SEAT HEATERS (IF EQUIPPED)

Without seat ventilators

With seat ventilators

Driver seat

Front passenger

seat

Front passenger

seat

Front passenger

seat

Seat heaters/ventilators (if equipped)

FEATURES & OPERATIONS

Blind Spot Monitor with Rear Cross

Traffic Alert (BSM w/RCTA)

(if equipped)

Indicators

RCTA function

display

Buzzer (RCTA only)

Outside rear view mirror indicators

The Blind Spot Monitor is a system that has two functions:

• The Blind Spot Monitor function (assists the driver in decision-making when to

change lanes)

• The Rear Cross Traffic Alert function (assists the driver when backing up)

The system is designed to use radar sensors to detect vehicles traveling in the Camry

HV’s blind spot. If a vehicle is detected, the driver will be alerted via the outside rear

view side mirror indicators.

Rear Cross Traffic Alert function:

While in reverse, when a vehicle approaching from the right or left rear of the vehicle

is detected, the outside rear view mirror indicators flash.

Refer to the Owner’s Manual for limitations and more details on this system before

attempting to use it.

Page is loading ...

Toyota Camry HV Reference guide

Brand: Toyota

Model: Camry HV

Category: Cars

Type: Reference guide

Download PDF

report

Toyota Camry HV Reference guide

Toyota Camry HV Reference guide

Related papers

Other documents