ES0152 / ES0152P CLI User Manual
x
About This Manual
The CLI User Manual provides specific information about using CLI to operate
this switch.
Overview
Chapter 1, Introduction, introduces you the release version, purpose, and
audience for ES0152 / ES0152P CLI user guide.
Chapter 2, CLI Management, provides step-by-step instructions for CLI
management, including login, commands of CLI, and global commands of
CLI.
Chapter 3, CABLEDIAG of CLI, shows a description, syntax, parameter,
and example for CABLEDIAG commands.
Chapter 4, CLEAR of CLI, shows a table of CLEAR commands with
description, syntax, parameter, and example.
Chapter 5, CONFIGURE Commands of CLI, shows a table of
CONFIGURE commands with description, syntax, parameter and example.
Chapter 6, COPY Commands of CLI, shows a description, syntax,
parameter, and example for COPY commands.
Chapter 7, DELETE Commands of CLI, shows a description, syntax,
parameter, and example for DELETE commands.
Chapter 8, DIR Commands of CLI, shows a description, syntax,
parameter, and example for DIR commands.
Chapter 9, DISABLE Commands of CLI, shows a description, syntax,
parameter, and example for DISABLE commands.
Chapter 10, DO Commands of CLI, shows a description, syntax,
parameter, and example for DO commands.
Chapter 11, DOT1X Commands of CLI, shows a description, syntax,
parameter, and example for DOT1X commands.
Chapter 12, ENABLE Commands of CLI, shows a description, syntax,
parameter, and example for ENABLE commands.
Chapter 13, FIRMWARE of CLI, shows a description, syntax, parameter,
and example for FIRMWARE commands.
Chapter 14, IP Commands of CLI, shows a description, syntax, parameter,
and example for IP commands.