Pulsar P-SEP1 Operating instructions

Pulsar
Brand
Pulsar
Model
P-SEP1
Type
Operating instructions

Pulsar P-SEP1 is a galvanic separator that eliminates problems associated with ground loops. It allows eliminating interference (usually lines moving across the screen, distorted and fuzzy image) resulting from the potential difference between the ground of the camera and the ground of other devices of the CCTV system, i.e. DVR, monitor. Such problems are most common in systems characterized by a particularly large difference in the length of cables connecting the cameras.

Pulsar P-SEP1 is a galvanic separator that eliminates problems associated with ground loops. It allows eliminating interference (usually lines moving across the screen, distorted and fuzzy image) resulting from the potential difference between the ground of the camera and the ground of other devices of the CCTV system, i.e. DVR, monitor. Such problems are most common in systems characterized by a particularly large difference in the length of cables connecting the cameras.

P-SEP1
v1.0
P-SEP1
Galvanic separator with BNC connectors on the cables
Edition: 1 from 26.08.2014
Supersedes edition:--------------
1. Technical description.
The P-SEP1 galvanic separator eliminates problems associated with ground loop. It allows eliminating interference (usually lines moving
across the screen, distorted and fuzzy image) resulting from the potential difference between the ground of the camera and the ground of
other devices of the CCTV system, i.e. DVR, monitor.
Such problems are most common in systems characterized by a particularly large difference in the length of cables connecting the
cameras.
The separator also provides protection against signal ground currents and protects the devices against damage due to lightning.
2. Technical parameters.
Adapter Attenuation
0,5dB
Frequency Response
20Hz-10MHz
Attenuation range
0 ÷ -3dB (-0,4 dB @ 5MHz)
Input impedance / connector type
75Ω / BNC socket
Output impedance / connector type
75Ω / BNC plug
The effectiveness of insulation / galvanic separation
600VDC
Insulation resistance
100MΩ
Breakdown Voltage
12Vrms
Operation temperature
-20°C ÷ 55°C
Storage temperature
-40°C ÷ 60°C
Dimensions
22 × 28 × 84mm
Net / gross weight
0,05kg/0,07kg
Declarations, warranty
CE, one year from the production date
3. Connection scheme.
The use of separators for both the cameras and recorders / monitors is recommended.
In some cases, it is sufficient to determine a line where interference is taking place and to mount the separator at its end.
Fig. 1. The use of separator on the side of the monitor
Fig. 2. The use of separator on the side of the monitor and camera
Example of image distortion:
Before using the separator
After using the separator
Visible lines moving across the screen
Image without distortion
Pulsar K.Bogusz Sp.j.
Siedlec 150, 32-744 Łapczyca, Poland
Phone (+48) 14-610-19-40, Fax (+48) 14-610-19-50
E-mail: [email protected], [email protected]
http:// www.pulsar.pl, www.zasilacze.pl
WEEE Label
Waste electrical and electronic equipment must not be disposed of with normal household waste. According to the European Union WEEE
Directive, waste electrical and electronic equipment should be disposed of separately from normal household waste.
.
WARRANTY
Pulsar K. Bogusz Sp.j. (manufacturer) grants a one year warranty
for the equipment, starting from the production date.
EN*
  • Page 1 1

Pulsar P-SEP1 Operating instructions

Pulsar
Brand
Pulsar
Model
P-SEP1
Type
Operating instructions

Pulsar P-SEP1 is a galvanic separator that eliminates problems associated with ground loops. It allows eliminating interference (usually lines moving across the screen, distorted and fuzzy image) resulting from the potential difference between the ground of the camera and the ground of other devices of the CCTV system, i.e. DVR, monitor. Such problems are most common in systems characterized by a particularly large difference in the length of cables connecting the cameras.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents