Graco Inc. 975HVLP User manual

Brand: Graco Inc.

Model: 975HVLP

Category: Paint Sprayer

Type: User manual

This manual is also suitable for

System Includes:

System Description:

The 998HVLP SIPHON SYSTEM has been

designed to provide you with the function and

feel of a conventional spray gun while comply-

ing with all environmental regulations govern-

ing HVLP use. This Sharpe System affords the

painter total control of all elements of painting:

Pattern Size, Pattern Shape, Fluid Delivery and

Atomization.

SPECIFICATIONS:

998HVLP-S-85 Siphon Feed Spray Gun

(Comp. #5666)

• Works and feels like conventional equipment.

• Superior atomization with less overspray.

• Superior corrosion resistant Niflor™ Fluid Tip.

• Stainless Steel Fluid Passage.

• Conforms to all environmental regulations

governing high volume, low pressure (HVLP)

spray equipment

• Requires 13.9 CFM for optimum performance

450T "No Drip" Cup Assembly

(Comp. #6610)

• One Quart Capacity.

• Will not drip when spraying in any position.

• No accidental spills or damaged work.

1 (800) SHARPE 1

FOR PRODUCT INFORMATION CALL:

THE SPRAY GUN PEOPLE

998HVLP SIPHON FEED

HVLP SYSTEM

1-Model 998HVLP-S-85 Siphon Spray Gun (Comp. #5666)

1-Model 450 "No Drip" Cup Assembly (Comp. #6610)

ORDER NO.

5685 998HVLP-2.2S (2.2mm)

HVLP SIPHON FEED SYSTEM

Recommended for

medium solids colors and clears

(Not for use with High Solids Materials)

SHARPE MANUFACTURING CO. • Santa Fe Springs, CA 90670 • www.sharpe1.com 309984B

CAUTION: Read First Before Using

THE 998HVLP Siphon Feed Spray Gun is

recommended for use with thin to medium viscosity

materials (14-20 seconds Zahn #2 Cup).

If heavy materials are to be used it is recommended

you use a pressure or gravity feed spray gun.

Please call customer service at (800) SHARPE1

or visit our website @ www.sharpe1.com for

recommendations on specific paint company products.

998HVLP Siphon Feed Spray Gun:

1. The spray gun should be lubricated frequently, using a

non-silicone oil. Place a drop on all moving parts, as

shown in illustration.

2. Do not completely disassemble the spray gun if poor

spray pattern occurs. See trouble shooting guide for

information on how to correct this problem.

3. Never submerge complete spray gun in any cleaning

solution.

4. Never use any hard objects, such as wire, paper clip, or

welding tip cleaner to clean the air cap orifices.

The air cap is made of high alloy heat treated aluminum

and hard objects will damage the orifices. To clean the

air cap, soak it in a compatible cleaning solution and use soft objects, such as a medium bristle brush.

5. Gun can be cleaned in gun washer.

450T -Lined "No-Drip" Cup Assembly:

1. cup assembly may be cleaned with compatible solvents by hand or in gun washer.

LUBE

HERE

HVLP SYSTEM SPRAY GUN MAINTENANCE:

SPRAYING OPERATION:

WARNING: Never pull trigger on spray gun when pointed in the direction of face, eyes or body.

To ensure optimum performance and compliance with applicable HVLP regulations, the following set-up

procedure is necessary:

1. The Model 998HVLP Series spray gun requires an air supply of 13.9 CFM. This would normally be

supplied by a minimum 4 hp compressor in good working condition. In addition, the air hose leading to

the gun should be at least 3/8" (inside diameter) also in good condition.

2. Insure that no air restrictions such as low-volume cheater-valves impede the air flow to the HVLP

System. If an air adjusting valve is desired, use a SHARPE 24AAV (Comp. # 2210) Air Adjusting Valve.

3. After supplying adequate air to the gun, adjust the inlet pressure to the lowest level recommended by

your paint manufacturer (usually 30-50 PSI). This will give you the best transfer efficiency and also

optimize your paint savings. The gun will automatically reduce the spraying pressure to 10 PSI or less

at the air cap.

4. The 998HVLP Series spray guns are designed to function at inlet pressure less than 40 PSI.

If you exceed 40 PSI inlet pressure, the pattern may distort and you may also exceed some HVLP

compliance regulations.

5. Once desired atomization is achieved, pattern size and shape is determined by adjusting the spray width

adjuster knob (top knob on spray gun handle). Turn knob clockwise to reduce pattern size, turn knob

counter-clockwise to increase pattern size. NOTE: See enclosed trouble shooting guide if you experience

an irregular pattern.

998HVLP SIPHON FEED SYSTEM

PTFE

309984B

998HVLP

(COMP. NO. # 5566)

SIPHON SPRAY GUN

MODEL 975HVLP SIPHON FEED SPRAY GUN

1-998HVLP-02

1-SGF98-01

(38001)

1-SGF98-05

(SEE NOZZLE CHART)

1-998-29

(27310)

1-20-28

(10326)

1-71-27

(16153)

1-971-21

(26032)

1-71-25

(16151)

1-PLT-11A

(34040)

1-71-42

(16167)

1-971-34

(U26032)

1-PLT-35

(34962)

1-71-50

(16175)

1-971-56

(U26056)

1-SGF98-55X

(38155)

1-SGF98-24

(38124)

1-975-54

(27060)

1-971-45

(26055)

1-998-26H

(27306)

1-71-38

(16163)

1-71-38

(16163)

1-PLT-32

(34959)

1-971-06

(U26016)

1-971-21

(26032)

1-71-37

(16162)

1-SGF-46

(37046)

1-SGF98-08

(38108)

1-SGF98-03

(SEE NOZZLE CHART)

1-SGF98-13

(38120)

1-775-41X

(25066)

1-975-65

(27075)

1-975-66

(27076)

1-975-48

(27058)

1-971-44

(26054)

1-PLT-33

(34960)

1-PLT-33

(34960)

1-PLT-11B

(34941)

THE SPRAY GUN PEOPLE

SERVICE KIT

1-998RK

COMP. NO. 27390

1-SGF98-03 * ORDER SGF-05 MATCHED SET

(See Nozzle Chart)

1-971-06U26016 AIR VALVE ASSEMBLY

1-SGF98-08 38108 WIDTH CONTROL ASSEMBLY

1-SGF98-13 38120 WIDTH CONTROL O-RING

1-71-25 16151 AIR VALVE CAGE

1-998-26H 27306 HVLP GUN HANDLE

1-998-29 27310 HVLP GUN HEAD

1-SGF-46 37046 MATERIAL CONTROL BUSHING

1-975-48 27058 FLUID INLET GASKET

1-975-5427060MATERIALCONTROL KNOB

1-SGF98-55X38155WIDTH CONTROL KNOB & VALVE

1-971-56

U26056

WIDTH CONTROL BODY

1-975-6527075FLUID INLET NIPPLE

1-975-66 27076 FLUID INLET LOCK NUT

1-SGF98-05 * FLUID TIP & FLUID NEEDLE

MATCHED SET(See Nozzle Chart)

PART NO. COMP. NO. DESCRIPTION

1-20-28 10326 HEAD ATTACHMENT GASKET

1-PLT-35 34962 TRIGGER SCREW

1-SGF98-01 38001 TIP GASKET

1-71-27 16153 HEAD ATTACHING SCREW

1-71-37 16162 AIRVALVE PACKING

1-71-38 16163 GASKET

1-71-42 16167 AIR VALVE SPRING

1-71-50 16175 "E" CLIP

1-SGF98-24 38124 NEEDLE SPRING

1-775-41X 25066 AIR VALVE

1-PLT-11A 34040 PACKING

1-PLT-11B 34941 PACKING SEAL

1-PLT-33 34960 SPRING WASHER

1-971-21 26032 PACKING NUT

1-PLT-32 34959 TRIGGER

1-971-34U26044 TRIGGER SHAFT

1-971-44 26054 PLUG

1-971-45 26055 AIR INLET NIPPLE

1-998-02 * AIR CAP (See Nozzle Chart)

PARTS LIST

PART NO. COMP. NO. DESCRIPTION

NOZZLE CHART

(2.2 mm)

998HVLP-S-85

COMP #5666

SYSTEMS

AVAILABLE

SPRAY GUNS

AVAILABLE

AIR CAP

1-998HVLP-02#S

Comp #27290

RECOMMENDED

USAGE

Medium Solids

Colors and Clears

FLUID TIP & FLUID NEEDLE

MATCHED SET

1-SGF98-05-2.2mm

Comp #38119

998HVLP-2.2S

COMP #5685

309984B

THE SPRAY GUN PEOPLE

PART NO. COMP. NO. DESCRIPTION

(COMP. NO. 6615)

450-72

(6630)

1-400-09

(20996)

1-400-03

(20990)

1-400-02

(20989)

1-400-01X

(20988)

1-400-07

(SOLD IN PACKS OF 5)

(20994)

1-400-08

(20995)

1-350-78

(20487)

1-450-04

(21497)

1-350-76

(20485)

450T-72

(6635)

PARTS LIST

1-350-76 20485 NO-DRIP TUBE

1-350-78 20487 NO-DRIP ELBOW

(Includes Nut & Ferrule)

1-400-01X 20988 FLUID ASSEMBLY

(Includes Nut, Stem & Tube)

1-400-02 20989 BRIDGE

1-400-03 20990 LEVER

1-400-07 20994 GASKET

1-400-08 20995 LOCK NUT

1-400-09 20996 THRUST WASHER

450T-72 6635 LINED CUP

1-450-04 21497 LID

MODEL 450T CUP

"NO-DRIP" CUP

MODEL450T -LINED

"NO DRIP" CUP ASSEMBLY

PTFE

309984B

Graco Inc. 975HVLP User manual

Brand: Graco Inc.

Model: 975HVLP

Category: Paint Sprayer

Type: User manual

This manual is also suitable for

Download PDF

report

Graco Inc. 975HVLP User manual

This manual is also suitable for

Graco Inc. 975HVLP User manual

Related papers

Other documents