8 9
Turn on your phone
3. When the name is complete, press Left, and select Done, and then Left again.
4. Press Right (Done) and the Left to save the contact.
In order to call a contact stored in the phonebook, in idle mode, press Right, scroll to a contact
and dial by pressing Left, select Call and press Left.
Input method
In the upper left corner the input method currently in use is indicated. You can change it by
pressing #. ABC use uppercase letters in English alphabet, abc, use lower-case letters of
English alphabet. If you need to use Swedish characters like ÅÄÖ you must press the # key until
you get the Sv or sv in the upper corner. Similarly, you can also use the Finnish, Norwegian and
Danish characters if needed.
Assign speed dial
The easiest way to make calls to the most commonly used names and numbers, is by speed
dial. The keys 1-9, *, 0 and # can be used to call a contact directly by holding down the key
for a while.
To assign numbers to the keys, do the following.
1. In idle mode, open the phonebook by pressing Right.
2. Press Left to open options.
3. Scroll down to Phonebook settings and press Left.
4. Select Speed dial with Left.
5. Check that speed dialing is activated. If the left key function is “Off”, speed dialing
is already enabled. If the left key function is “On”, press Left to enable it.
6. Scroll down to Set number and press Left.
7. Now, the list of keys for speed dialing is shown. Scroll down to the key you want to
save a contact to. Press Left.
8. Here you can select one contact from the phonebook by scrolling. You can jump directly
to the starting letter of the contact. Select the contact with Left.
9. Continue to store other contacts on the other keys.
When this is done, you can simply press the selected key and hold it until the contact is called.
Turn on your phone
Setting the SOS function
The phone has a SOS function that is activated by pressing and holding the red SOS button
on the back.
1. The phone will then start a local alarm and flash the screen showing preparead
data on the screen.
2. The phone sends a prepared message to up to five of your contacts.
3. The phone dials the specified contacts in order until someone answers.
You need to prepare the function in three steps. First, you must specify the numbers to be
contacted in case of emergency.
NOTE: Please note that the contacts phones must not have voicemail activated
because this would be perceived as an answer, and then your phone will not
continue to call the next number on the list.
To specify the recipients of the SOS function, first press Up to access the phone menu.
1. Use Up / Down to scroll to SOS. Enter the menu with Left.
2. Now select Num settings and press Left again.
3. Now, the list of numbers that should be alert is shown.
4. Start with the person to be contacted first. Press Left.
5. Here you can edit a number manually by pressing Left. Pres Left when ready and confirm
with Left again. You can also delete the number you have already entered.
6. Continue to store other numbers on the other alarm positions.
7. Go back to SOS menu by pressing Right.
The next step is to write the message that will be sent out when you press the SOS button.
1. Scroll down to the SOS SMS and press Left.
2. Here you enter your message. For example, who you are and that you need urgent help.
3. Save by pressing Left. Select Done, press Left. And Left again to save.
Finally you should prepare the data that will be displayed on the phone screen.
1. Scroll down to the Display Screen Settings and press Left.
2. Enter your name, blood type (0, A, B, AB, other), important sickness information and
name and number to a relative to contact.
Now your phone is ready to alert your relatives as soon as you press and hold the SOS-button.