Vantron| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX3588 | User Manual www.vantrontech.com
Revision History:
No. Version Description Date
1 V1.0 First release Sep. 26, 2022
2 V1.1
Added Ubuntu system manual, adjusted the
typesetting accordingly
Nov. 28, 2022
3 V1.2 Updated certain I/O description Feb. 13, 2023
4 V1.3
Updated serial port description as per the
design change
May 18, 2023
Vantron| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX3588 | User Manual www.vantrontech.com
Table of Contents
Foreword .............................................................................................................................. 1
CHAPTER 1 INTRODUCTION .................................................................................................... 5
1.1 Product Overview.......................................................................................................... 6
1.2 Unpacking ..................................................................................................................... 7
1.3 Specifications ................................................................................................................ 8
1.4 Product Layout .............................................................................................................. 9
1.5 Operating System ........................................................................................................ 10
1.6 Mechanical Dimensions .............................................................................................. 10
1.7 Power Supply and Consumption ................................................................................. 10
1.8 Environmental Specifications ...................................................................................... 10
CHAPTER 2 GETTING STARTED ............................................................................................. 11
2.1 Hardware Connection ................................................................................................. 12
2.2 Using the Device ......................................................................................................... 15
2.3 Turning on/off the Device ........................................................................................... 16
CHAPTER 3 HARWARE DESCRIPTION .................................................................................... 17
3.1 Power input ................................................................................................................. 18
3.2 ON/OFF button ............................................................................................................ 18
3.3 Ethernet jack ............................................................................................................... 19
3.4 USB 2.0 + Ethernet jack ............................................................................................... 19
3.5 USB 3.0 ........................................................................................................................ 19
3.6 USB Type-C .................................................................................................................. 20
3.7 HDMI port ................................................................................................................... 20
3.8 Micro SD & Micro SIM slots ........................................................................................ 20
3.9 Serial connectors ......................................................................................................... 20
3.10 CAN ............................................................................................................................ 21
3.11 GPIO ............................................................................................................................ 22
3.12 M.2 slots ...................................................................................................................... 22
3.13 Antenna connectors .................................................................................................... 22
CHAPTER 4 FIRST-USE DEBUGGING ...................................................................................... 23
4.1 Serial connectors ......................................................................................................... 24
4.1.1 Android and Ubuntu systems ...................................................................................... 25
4.1.2 Debian system ............................................................................................................. 27
4.2 CAN ............................................................................................................................ 29
4.3 GPIO ............................................................................................................................ 31
4.3.1 Android system ........................................................................................................... 31
4.3.2 Ubuntu and Debian systems ....................................................................................... 32
4.4 Watchdog Timer ......................................................................................................... 33
4.5 Audio Play ................................................................................................................... 34
CHAPTER 5 ANDROID SYSTEM MANUAL .............................................................................. 37
5.1 Enable Developer Options .......................................................................................... 38
5.2 ADB Setup on the Windows Host ................................................................................ 39
Vantron| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX3588 | User Manual www.vantrontech.com
5.3 App Installation via ADB Commands .......................................................................... 41
5.4 Firmware Upgrade on a Windows Host ...................................................................... 42
CHAPTER 6 DEBIAN SYSTEM MANUAL ................................................................................. 45
6.1 About the System ........................................................................................................ 46
6.1.1 User and password ...................................................................................................... 46
6.1.2 System information ..................................................................................................... 46
6.2 System Settings ........................................................................................................... 47
6.2.1 Language setup ........................................................................................................... 48
6.2.2 Time and date setup ................................................................................................... 50
6.2.3 Network Configuration ............................................................................................... 51
6.3 Image Flashing on an Ubuntu Host ............................................................................. 52
6.3.1 Prerequisites ............................................................................................................... 52
6.3.2 Image flashing ............................................................................................................. 52
CHAPTER 7 UBUNTU SYSTEM MANUAL ............................................................................... 54
7.1 About the System ........................................................................................................ 55
7.1.1 User and password ...................................................................................................... 55
7.1.2 System information ..................................................................................................... 55
7.2 System Settings ........................................................................................................... 56
7.2.1 Language setup ........................................................................................................... 56
7.2.2 Date & time setup ....................................................................................................... 56
7.2.3 Network/Wi-Fi ............................................................................................................ 56
7.2.4 User ............................................................................................................................ 56
7.3 Image Flashing on an Ubuntu Host ............................................................................. 57
7.3.1 Prerequisites ............................................................................................................... 57
7.3.2 Image flashing ............................................................................................................. 57
7.4 ROS Tutorials ............................................................................................................... 58
CHAPTER 8 DISPOSAL AND WARRANTY ............................................................................... 59
8.1 Disposal ....................................................................................................................... 60
8.2 Warranty ..................................................................................................................... 61
Appendix Regulatory Compliance Statement ..................................................................... 62
Vantron| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX3588 | User Manual 1 www.vantrontech.com
Foreword
Thank you for purchasing IBOX3588 Edge AI Embedded Industrial Computer (“the Device” or
“the Product”). This manual intends to provide guidance and assistance necessary on setting
up, operating or maintaining the Product. Please read this manual and make sure you
understand the structure and functionality of the Product before putting it into use.
Intended Users
This manual is intended for:
• Operator of the Product
• Technical support engineers
• Other users
Copyright
Vantron Technology, Inc. (“Vantron”) reserves all rights of this manual, including the right to
change the content, form, product features, and specifications contained herein at any time
without prior notice. An up-to-date version of this manual is available at
www.vantrontech.com.
The trademarks in this manual, registered or not, are properties of their respective owners.
Under no circumstances shall any part of this user manual be copied, reproduced, translated,
or sold. This manual is not intended to be altered or used for other purposes unless otherwise
permitted in writing by Vantron. Vantron reserves the right of all publicly released copies of
this manual.
Disclaimer
While all information contained herein has been carefully checked to assure its accuracy in
technical details and typography, Vantron does not assume any responsibility resulting from
any error or features of this manual, nor from improper uses of this manual or the software.
It is our practice to change part numbers when published ratings or features are changed, or
when significant construction changes are made. However, some specifications of the Product
may be changed without notice.
Vantron| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX3588 | User Manual 2 www.vantrontech.com
Technical Support and Assistance
Should you have any question about the Product that is not covered in this manual, contact
your sales representative for solution. Please contain the following information in your
question:
• Product name and PO number;
• Complete description of the problem;
• Error message you received, if any.
Vantron Technology, Inc.
Address: 48434 Milmont Drive, Fremont, CA 94538
Tel: (650) 422-3128
Email: sales@vantrontech.com
Regulatory Information
The Product is designed to comply with:
• FCC
• CCC
• UL
Please refer to the Appendix for Regulatory Compliance Statement.
Symbology
This manual uses the following signs to prompt users to pay special attention to relevant
information.
Caution for latent damage to system or harm to personnel
Attention to important information or regulations
Vantron| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX3588 | User Manual 3 www.vantrontech.com
General Safety Instructions
The Product is supposed be installed by knowledgeable, skilled persons familiar with local
and/or international electrical codes and regulations. For your safety and prevention of
damage to the Product and other equipment connected to it, please read and observe
carefully the following safety instructions prior to installation and operation. Keep this manual
well for future reference.
• Do not disassemble or otherwise modify the Product. Such action may cause heat
generation, ignition, electronic shock, or other damages including human injury, and may
void your warranty.
• Keep the Product away from heat source, such as heater, heat dissipater, or engine casing.
• Do not insert foreign materials into any opening of the Product as it may cause the
Product to malfunction or burn out.
• To ensure proper functioning and prevent overheating of the Product, do not cover or
block the ventilation holes of the Product.
• Follow the installation instructions with the installation tools provided or recommended.
• The use or placement of the operation tools shall comply with the code of practice of
such tools to avoid short circuit of the Product.
• Cut off the power before inspection of the Product to avoid human injury or product
damage.
Vantron| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX3588 | User Manual 4 www.vantrontech.com
Precautions for Power Cables and Accessories
Use proper power source only. Make sure the supply voltage falls within the specified
range. The Product is designed to use 9-36V DC. Always check whether the Product is DC
powered before applying power.
Place the cables properly at places without extrusion hazards.
Use only approved antenna(s). Non-approved antenna(s) may produce spurious or
excessive RF transmitting power which may violate FCC limits.
Cleaning instructions:
• Power off before cleaning the Product
• Do not use spray detergent
• Clean with a damp cloth
• Do not try to clean exposed electronic components unless with a dust collector
Power off and contact Vantron technical support engineer in case of the following faults:
• The Product is damaged
• The temperature is excessively high
• Fault is still not solved after troubleshooting according to this manual
Do not use in combustible and explosive environment:
• Keep away from combustible and explosive environment
• Keep away from all energized circuits
• Unauthorized removal of the enclosure from the device is not allowed
• Do not replace components unless the power cable is unplugged
• In some cases, the device may still have residual voltage even if the power cable is
unplugged. Therefore, it is a must to remove and fully discharge the device before
replacement of the components.
Vantron| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX3588 | User Manual 6 www.vantrontech.com
1.1 Product Overview
Vantron IBOX3588 Edge AI Embedded Industrial Computer is powered by Rockchip latest
flagship RK3588 AIoT chipset that is equipped with an 8-core 64-bit CPU, an ARM Mali-
G610 MP4 quad-core GPU, and a built-in AI acceleration NPU, capable of providing 6 TOPS
computing power and supporting mainstream deep learning frameworks. With the
development of the technology, there definitely will be a rising demand for AI-based
products from the industrial control market, including but not limited to industrial robots,
automated control, drones, etc.
The industrial computer offers two Gigabit Ethernet ports, supports 2.4GHz/5GHz Wi-Fi 6
and Bluetooth 5.0, and provides an M.2 slot for 4G/5G expansion to keep communication
uninterrupted. It also supports 8K video decoding and encoding to deliver optimized display
performance.
Since the industrial computer provides rich interfaces, a wide range of peripherals can be
connected for extended applications like ARM PC, edge computing, cloud server, smart
NVR, and other fields. Moreover, the different operating systems provide a stable and
secure system environment for users.
Vantron| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX3588 | User Manual 7 www.vantrontech.com
1.2 Unpacking
The Product has been carefully packed with special attention to quality. However, should
you find any component damaged or missing, please contact your sales representative in
due time.
Standard accessories Optional accessories
1 x IBOX3588
industrial computer
1 x 12V DC Power
adapter & power cord
2 x Wi-Fi & BT
antenna
1 x Female DC
connector
\ \
2 x 4G LTE antenna
/
4 x 5G antenna
Actual accessories might vary slightly from the list above as the customer order might
be different from the standard configuration options.
Vantron| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX3588 | User Manual 8 www.vantrontech.com
1.3 Specifications
IBOX3588
System
CPU Rockchip RK3588, Quad-core Cortex-A76 + Quad-core Cortex-A55,
2.4GHz (Max.)
GPU
ARM Mali-G610 MC4, 1GHz (Max.)
NPU
6 TOPS
Memory
8GB LPDDR4, up to 32GB
Storage 32GB eMMC, up to 128GB
SSD supported by an M.2 M-Key/M.2 B-Key (256GB ~ 1TB)
Communication
Ethernet
2 x RJ45, 10/100/1000Mbps
Cellular
4G/5G (expansion by an M.2 B-Key)
Wi-Fi & Bluetooth
Wi-Fi 802.11 a/b/g/n/ac/ax + BT 5.0
Media
Display
1 x HDMI (4096 x 2160 @60Hz)
Video
1 x Video out port
Audio
1 x Combo audio jack
I/Os
USB
2 x USB 3.0 Host, Type-A
1 x USB 2.0 Host, Type-A
1 x USB 3.0 Type-C (OTG supported)
Serial port
2 x RS232/RS485 (2 x 3 x 3.81mm, Baud rate: 115200)
SIM slot
1 x SIM slot
Micro SD slot
1 x Micro SD slot
RTC
Supported
Watchdog
Supported
Expansion
M.2 slot
1 x M.2 M-Key (2260/2280), PCIe 3.0 x 4, for SSD
1 x M.2 B-Key (2242/3052), USB 3.0/SATA 3.0, for 4G/5G/SSD
GPIO
4 x GPIO on the Phoenix terminal
CAN
2 x CAN on the Phoenix terminal
System Control
Button
1 x ON/OFF button (long press to reset)
LED
1 x LED indicator for power and system status
Software
OS
Android 12, Debian, Ubuntu
Language
English (default), Chinese
Device management
platform
BlueSphere MDM (Android version only)
OTA tool
BlueSphere OTA
Power
Input
1 x Power distribution block (12V/5A, 24V/3A)
Mechanical
Dimensions
200mm x 143mm x 63.2mm
Enclosure
Aluminum + sheet metal, black
Weight
1200g
Shock test
IEC 60068-2-27
IP rating
IP40
Environment
Condition
Temperature Operating: -20℃ ~ +70℃
Storage: -40℃ ~ +85℃
Humidity
RH 0~95% (non-condensing)
Certification
FCC, CCC, UL
Vantron| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX3588 | User Manual 9 www.vantrontech.com
1.4 Product Layout
1.4.1 Front view
1.4.2 Back view
CAN
GPIO
Grounding
screw
RS485/RS232
Installation
hole
Installation
hole
Cellular
antenna
Cellular
antenna
Wi-Fi & BT
antenna
Wi-Fi & BT
antenna
Cellular
antenna
Installation
hole
Audio jack
ETH
ETH
Installation
hole
HDMI
USB 3.0
USB
Type-C
USB 2.0
Micro SD &
Micro SIM slots
Power
terminal
Cellular
antenna
Power
button
Vantron| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX3588 | User Manual 10 www.vantrontech.com
1.5 Operating System
The device supports multiples operating systems, such as Android, Debian, and Ubuntu.
1.6 Mechanical Dimensions
• 200mm x 143mm x 63.2mm
1.7 Power Supply and Consumption
IBOX3588 works with 12V/24V DC power input supplied by a DC connector.
The power consumption of the device is largely dependent on the RAM, storage capacity,
peripherals, and other configurations of the Product.
1.8 Environmental Specifications
IBOX3588 works at a temperature ranging from 0℃ to +60℃ and at relative humidity of
no more than 95% for non-condensing purpose. It is designed to be stored at a temperature
ranging from -40℃ to +85℃
Vantron| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX3588 | User Manual 12 www.vantrontech.com
2.1 Hardware Connection
Before you proceed with the configuration of IBOX3588, follow the steps below to finish
hardware connection.
1. Position the device on a desired place, for instance, a wall or a desktop;
2. Align the screws (M4 x 6 / M4 x 8 recommended) with the screw holes reserved on
the mounting bracket, and mark the position of the screws on the wall or the desktop;
3. Drill four screw holes on the marks made in the prior step;
Vantron| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX3588 | User Manual 13 www.vantrontech.com
4. Place the device back and adjust the position of the bracket, if needed, then use a
screwdriver to tighten the screws and secure the device;
5. Insert an active SIM card into the Micro SIM slot with the gold-colored contacts facing
up and insert an SD card into the Micro SD slot with the gold-colored pins facing down;
6. Install the antennas to the antenna connectors and tighten the connectors;
There are no dedicated antenna connectors designed exclusively for 4G or 5G
communication except that 4G communication requires two antennas, while 5G
communication requires four.
Vantron| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX3588 | User Manual 14 www.vantrontech.com
7. When necessary, plug one end of an Ethernet cable into an Ethernet jack of IBOX3588
and the other to a live Ethernet port;
8. When necessary, use another Ethernet cable to connect the other Ethernet jack of the
device with a peripheral;
9. Insert the terminal end of the female DC power connector into the power terminal of
IBOX3588 and the other end into the power adapter;
10. Use a 12V/24V DC power adapter to power on IBOX3588;
11. The LED indicator on the power button will turn solid green after power application.
If you are using the power connector supplied by Vantron
,
Red wire: +
Black wire:
-
Vantron| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX3588 | User Manual 15 www.vantrontech.com
2.2 Using the Device
To access the GUI of the device, follow the steps below to connect it to a mouse, keyboard
and monitor.
1. Insert one end of an HDMI cable to the HDMI interface of IBOX3588 and the other end
to a monitor;
2. Connect a mouse and keyboard separately to the USB interfaces on the device;
3. Power on the device using a 12V/24 DC power adapter;
4. To debug the device remotely, use a USB Type-A to Type-C cable to connect the device
to a host computer via the USB Type-C interface.
Vantron| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX3588 | User Manual 16 www.vantrontech.com
2.3 Turning on/off the Device
Having set up IBOX3588 according to the aforementioned steps, users can operate the
device following the steps below:
• The device will automatically boot up after power-on;
• After IBOX3588 starts up, users can:
1. Press the ON/OFF button once to turn off the monitor/wake up the device from
the sleep mode;
2. Press the ON/OFF button and hold for 2 seconds to call the power menu, and
click Power off to turn off the device orderly;
3. Press the ON/OFF button and hold for about 5 seconds to turn off the device
directly;
4. When necessary, unplug the power adapter from the power connector of
IBOX3588 or the outlet to force shutdown.
The actions might vary with the operating system.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Vantron IBOX66 User manual
-
Vantron VT-SBC-RK3566-NT User manual
-
Vantron VT-MITX-TGL User manual
-
Vantron Oplayer357 OPS Player User manual
-
Vantron IBOX3588 User manual
-
Vantron IBOX66 User manual
-
Vantron VT-SBC-RK66 User guide
-
Vantron IBOX88 User guide
-
Vantron R102 User manual
-
Vantron Oplayer3399 OPS Player User manual
Other documents
-
Sharp PN-CD701 Owner's manual
-
Eurotech DuraVIS 3010 Owner's manual
-
-
-
-
-
-
-
-
Dell Embedded Box PC 5000 User guide