Solt GGSFLW900B Quick start guide

Brand: Solt

Model: GGSFLW900B

Type: Quick start guide

Solt GGSFLW900B is an advanced front load washing machine with a large 9.0kg capacity, perfect for handling large loads of laundry. With its 90°C high-temperature sterilization cycle, the Drum Clean program ensures that your washing machine remains clean and hygienic, reducing the risk of bacteria build-up. The machine features a variety of washing options to suit different fabric types and soil levels, allowing you to customize the washing cycle to your specific needs. The digital display provides clear and easy-to-read information about the selected cycle and its progress.

Tips for Using & Operating Your Washing Machine

Model: GGSFLW900B

Front Load

Washing Machine

9.0kg Capacity

Quick Start Guide

Front Load

Washing Machine

9.0kg Capacity

Getting Started...

For more information please call 1300 11 43 57 WWW.SOLT.HOUSE ESSENTIALS FOR LIFE

Preparing for first use

Calibration

Drum Clean

• Before washing, please ensure that the

transport bolts are removed from the rear of

the machine and that it is installed correctly

following the instructions on page 7 of the

user manual.

• Operate the washing machine for one full

Cotton cycle at 90° C without clothes inside to

ensure that the drum is as clean as possible.

• It’s recommended to calibrate the machine,

to ensure optimal performance.

• Remove all accessories from the drum and

close the door;

• Insert the mains plug to the socket;

• Switch on the washing machine, and within

10 seconds, press “Delay” and “Temp.”

simultaneously for approximately 3 seconds

until “t19” is displayed on the display.

• Press the Start/Pause to start the appliance,

initially“---” is displayed, and then “***”

(such as “126”) is displayed to indicate the real

time drum speed. When the number reaches

a certain value (and stop changing), it means

the washing machine is successfully calibrated.

After 25 washes, the Drum Clean light will

illuminate to remind you to run this cycle.

This program provides a 90°C high temperature

sterilisation cycle to clean the drum and tube.

When this procedure is performed, clothes

or other items should not be added. Use this

program regularly according to your needs.

To cancel the reminder for another 25 cycles,

press and hold the Drum Clean button for

3 seconds.

1 Press ‘On/Off’ to power on your front load

washing machine.

2 Select your desired washing cycle by turning

the Program Selection Dial.

3 Select your preferred washing options

using the additional function buttons on

the right hand side panel (should you wish

to select options different from the default

cycle settings).

4 Touch the ‘Start/Pause’ button to start

the cycle.

For detailed Operating Instructions, refer to

pages 15–19 of your user manual.

Operating the Washing Machine

MODEL

GGSFLW900B

Solt GGSFLW900B Quick start guide

Solt GGSFLW900B Quick start guide

Solt GGSFLW900B Quick start guide

Other documents