![](//vs1.manuzoid.com/store/data-gzf/a39fc9709b742b661e2993a842d743ca/2/002348818.htmlex.zip/bg2.jpg)
3X
20
I
8mm
Strip the wire to the indicated length (mm) ;different items require different length
When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.
Take note of the symbols when connecting wires:
=Neutral =Live =Earth
11.
12. Meaning of symbols:
Connect using the spaciļed cable; different items require different cable
The luminaire can be dimmed by wall switch
Only the self-shielded halogen lamp should be used with the luminaire
3x
min.0.75mm2
NL