Vantec UGT-CR702 Quick Installation Guide

Vantec
Brand
Vantec
Model
UGT-CR702
Category
Card readers
Type
Quick Installation Guide
UGT-CR702
Copyright © 2023 Vantec Thermal Technologies. All Rights Reserved.
All Registered Trademarks Belong to Their Respective Companies.
Printed on
Recycled Paper.
Information in this document is subject to change without notice.
Reproduction of these materials in any manner whatsoever without
written permission is strictly forbidden.
v1.0
QRCode to product
Page, Drivers, Manual,
and FAQ.
1) Plug USB C cable to Card Reader
2) Plug the other end of USB C cable to your system
USB C port
3) Insert your Media Card into the Card Reader Slot
4) If the Media Card is new, it will need to be prep
(initialize, partition, and formatted)
5) lf the Card is not new, the system File Manager will
see the Data on the Card
SD 4.0
UHS-II CFexpress
Type B
Card
USB 3.2 Gen2x1 CFexpress Type B
and SD 4.0 UHS-II Dual LUN
Card Reader
Connect to devices
UGT-CR702
User Guide
www.vantecusa.com
Hardware Installation
*No drivers required for all Operating Systems
Spring Load Slot, Insert Label Face Up
SD 4.0 Slot
CFexpress
Type B Slot
Activity LED
for SD 4.0 UHS-II Activity LED
for CFexpress
  • Page 1 1

Vantec UGT-CR702 Quick Installation Guide

Vantec
Brand
Vantec
Model
UGT-CR702
Category
Card readers
Type
Quick Installation Guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents