2
Accessory Cross Bar Setup
• Aer loosening the bolt, adjust the clamp as
per your requirement.
Crossbar Assembly
• Loosen the bolt of the lamp using the 4mm
Allen Key.
• Now, re-ghten the clamp using the Allen
key.
• Repeat the same process for the other
clamp.
• Loosen the knobs of the clamp and mount
the Cross Bar on the pole of the Bowado Pro
Cart (Not Included).
• Aer carefully mounng the Cross Bar,
re-ghten its knobs.
• The Cross Bar is properly aached to the
Cart, as shown in the image.
NOTE: The Cross Bar is ready to handle all
your essenal gear, ensuring a seamless and
ecient shoong experience.