SportsArt S933 Owner's manual

Sports Art Industrial Co., Ltd. TUV-CERT ISO 9001/9002/14000 Certied Quality Products 2013.08.12

S933 Pec Deck

Owner’s Manual

S933 OWNER’S MANUAL CONTENTS

1. INTRODUCTION ................................................................................ 2

2. SAFETY PRECAUTIONS .................................................................. 3

3. LIST OF PARTS ................................................................................. 4

4. ASSEMBLE THE PRODUCT ............................................................. 6

STEP 1 Install the Foot Rest .................................................................. 6

STEP 2 Install the Weight Stack Covers ................................................ 7

STEP 3 Install the Storage Tray Holder ................................................. 8

STEP 4 Handle Position Adjustment Instrctions .................................... 9

STEP 5 Seat Position Adjustment Instrctions ........................................ 10

STEP 6 Belt Tension Adjustment Instructions ........................................ 11

STEP 7 Minor Weight Stack Instructions ............................................... 12

5. MAINTENANCE ................................................................................ 13

MAINTENANCE Machine Maintenance ................................................ 13

MAINTENANCE Schedule .................................................................... 15

MAINTENANCE Task List .................................................................... 16

MAINTENANCE One-Year Maintenance Log ....................................... 17

6. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 18

1. INTRODUCTION

Congratulations on the purchase of a high quality SportsArt product, the S933

Independent Pec Deck machine. Constructed of high quality materials and designed

for years of reliable performance, this product was made for full commercial use.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of

this product will help ensure that exercisers obtain their tness goals safely and

successfully.

2. SAFETY PRECAUTIONS

This product was designed and built for optimum safety. However certain

precautions apply during the use of this product. Please note the following safety

precautions:

• Please read the entire manual before assembly and operation. Make

sure the product is installed and operated as instructed in this manual.

• Assemble and operate the product on a solid, level surface. Do not use

outdoors or near water, including pools and saunas.

• Check the product before every use. Make sure all parts are assembled,

and all fasteners are tightened. Do not use the product if it is disassembled

in any way.

• Wear proper workout clothing. Do not wear loose clothing. Do not wear

shoes with leather soles or high heels. Tie all long hair back. Do not go

barefoot on this product.

• Keep away from moving parts. Moving parts may or may not stop

immediately if an object becomes caught or impedes normal motion.

• Use this product only for its intended purpose as described in this manual.

• Be careful when mounting and dismounting the unit.

• Never operate this product if it has been damaged in any way. If it is

not working properly, or has been dropped or damaged, contact a service

technician for repairs.

• Do not use accessories that are not specically recommended by the

manufacturer. Such parts might cause injuries or cause the unit to fail.

• This product is not intended for use by persons (including children) with

reduced physical, sensory, or mental capabilities, or by people who are

otherwise decient in product knowledge or experience. If such people use

this product, they should be given training and be supervised at all times by

someone responsible for their safety.

• Children should be supervised to ensure that they do not play on or near

the product.

• The user weight limit for this product is 227 kg, 500 lb.

CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR

WORKOUT and consult your physician immediately. Work within your

recommended exercise level. DO NOT work to exhaustion. Before beginning

any exercise program, you should consult with your doctor. It is recommended that

you undergo a complete physical examination.

3. LIST OF PARTS

Assembly Parts

No. Name Qty. No. Name Qty.

A1 Main Frame 1 A7 118 Oval Foot Cover A 1

A2 Foot Rest 1 A8 118 Oval Foot Cover B 1

A3 Weight Stack Front Cover 1 A9 Storage Tray 1

A4 Weight Stack Rear Cover 1

A5 Dual 80 Oval Foot Cover A 1

A6 Dual 80 Oval Foot Cover B 1

Components on the Product

No. Name Specication Notes

Umbrella head inner hex screw M8*L20

Spring washer M8

Washer D17*d8.3*t2

Plastic round head hex socket

screws

M6*P1.0*L20

Components in the Hardware Kit

No. Name Qty. Specication Notes

Push revits 4

L-shaped Allen wrench 2 M5

L-shaped Allen wrench 1 M6

Double open-end wrench 1 8*17

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual

the words “left” and “right” are used to refer to the product and its parts. As

such, these designations correspond to the “left” and “right” sides of a person

in position to exercise on this product. Also, for brevity, the word “screws” or

“nuts” is used where washers and other hardware may be involved.

STEP 1 Install the Foot Rest

(a). First, remove the screws (20) from the foot pedal frame (A2).

(b). Attach the foot rest (A2) onto the main frame (A1), then secure the

assembly with screws (20).

STEP 2 Install the Weight Stack Covers

(a). Attach both front and back weight stack covers (A3)(A4) onto the weight

stack frame (A1). (Note: before the attaching the front weight stack cover (A3),

make sure the inside hanger is hooked to the frame before securing it to the

weight stack frame.)

(b). Attach the oval foot covers (A5)(A6)(A7)(A8) onto the weight stack frame

(A1) legs. Align the ends before use push revits (10) to secure the foot covers

together.

Note: While installing the oval foot covers, if the holes don’t match up, please

change the direction of the covers. The cutout should face the inner side of

foot tube.

STEP 3 Install the Storage Tray Holder

Please follow the instructions (a) through (b) to install the storage tray

(a). Locate the position where the storage tray (A9) attaches to the main

frame (A1), then remove the screws (21) from the main frame.

(b). Attach the storage tray (A9) to the main frame (A1) and use screws (21)

to secure the assembly.

STEP 4 Handle Position Adjustment Instructions

Pull the handle position adjusting knob and rotate the handles to the the ap-

propriate position, release the adjusting knob to secure the position.

STEP 5 Seat Position Adjustment Instructions

*Adjust the seat back: Pull the seat back lever to adjusted to the desired

position and then release the seat back lever to secure the position.

*Adjust the seat height: Pull the seat height lever to adjusted to the desired

height and then release the seat lever to secure the position.

* If the machine has not been used for a long time or the seat is adjusting

slowly. Please put presuure on the seat several times before normal operation.

STEP 6 Belt Tension Adjustment Instructions

1. After the installation and the final positioning of the machine, make the

appropriate adjustments to ensure that the machine is working.

2. If the belt is too tight or too loose, first loosen nut A as shown then adjust

nut B. If the belt length is too long, adjust downward; if the belt length is too

short, adjust upward. Adjust the belt to the proper position, then tighten nut

A to secure the belt length.

Note: After adjusting the belt, the gap between nut Aand B must be within

35mm(1.4”). If the gap still exceeds the 35mm limit after the first step, you

need to:

A. Loosen the screws on C and adjust the belt to the proper length.

B. Tighten the scrwes on C.

3. After the adjustment, then the machine should be tested to determine the

functionality of the machine.

STEP 7 Minor Weight Stack Instructions

To adjust the minor weight stack, insert the upper pin to add 3.5Lbs/1.5kgs

or the lower pin to add 6.5Lbs/3kgs. When the minor weights are not in use,

pull the pin to release the weight.

5. MAINTENANCE

This section covers maintenance topics and includes a maintenance

schedule, task list, and log.

MAINTENANCE Machine Maintenance

1. Please clean and lubricate the guide rod once a week.

(a). Use a clean, lint-free towel to apply the lubricant onto the guide rods.

(b). Test the weight stack on the guide rod and make sure the operation is

smooth.

(c). Repeat operations (a) and (b) 2 to 3 times.

2. Check the tightness of the cable or belt and follow the steps to make

adjustments.

MAINTENANCE Machine Maintenance

IMPORTANT NOTE

1. Once the machine belt reaches the warranty period, it is recommended to

replace the belt.

2. Belt safety check, after a year in use, check belt weekly. Depend on the

use conditions, increase the frequency of inspections.

(As shown: (A) a belt, (B) the belt extension)

During inspection, if found cracks in the belt or the belt is exposed to other

unusual circumstances, please immediately stop using the machine and

replace the belt.

MAINTENANCE Schedule

Area Day Week Month Quarter Year Notes

1 Exterior Clean.

2 Screws Inspect for looseness

and secure if necessary.

3 Testing To conrm that the

machine is working

properly

4 Cushions Wipe with a damp cloth.

5 Belt Check for damage or

wear. If so, need for

replacement.

6 Guide Rod Clean and lubricate.

7 Seat Tube Clean and lubricate.

MAINTENANCE Task List

Like cars, fitness products require maintenance. Regular maintenance ex-

tends product life, and failure to maintain products can void the manufac-

turer’s warranty. Copy the maintenance log sheet, and record maintenance

work for each fitness product.

Daily tasks

1. Use a clean, lint-free towel to wipe down the product exterior.

2. Inspect all screws. Secure if necessary.

3. Make sure the machine is working properly.

4. Wipe cushions clean with a damp cloth.

Weekly tasks

1. Check the belt for damage or tear.

2. Clean and lubricate guide rods.

3. Clean and lubricate seat tube.

Caution

● Please follow standard safety precautions when working on this product.

● Do NOT use cleaners with alcohol, ammonia, or other damaging chemi-

cals. The use of such chemicals can damage the product and void the war-

ranty. Never spray or pour any liquid directly onto the product. Doing so can

damage components and void the warranty.

Daily Tasks Weeks 1-7 Weeks 8-14 Weeks 15-21 Week 22-28

Completed

Daily Tasks Week 29-35 Week 36-42 Week 43-49 Week 50-52

Completed

Weekly Tasks Weeks 1-7 Weeks 8-14 Weeks 15-21 Weeks 22-28

Completed

Weekly Tasks Weeks 29-35 Weeks 35-42 Weeks 43-49 Weeks 50-52

Completed

Monthly tasks 1 2 3 4 5 6 7 8 9 10 11 12

Completed

Quarterly Tasks Quarter 1 Quarter 2 Quarter 3 Quarter 4

Completed

Yearly Tasks Year 1

Completed

Notes: __________________________________________________________

________________________________________________________________

MAINTENANCE One-Year Maintenance Log

Facility:_______________________ Supervisor:____________________

Product model number:__________ Serial number:_________________

Start date: ____________________ End date:_____________________

Page is loading ...

SportsArt S933 Owner's manual

Related papers

Other documents