Rollei 20943 Datasheet

Category
Tripods
Type
Datasheet

Rollei 20943 is a multifunctional photographic equipment for cameras and camcorders. It can be used as a monopod, stabilizer, microphone boom, flashlight holder, and more. The Rollei 20943 is made of aluminum and has a black finish. It is 77 cm when folded and 165 cm when unfolded. The ball head tolerance is only ±0.05 mm, so the locking strength is larger than other ball heads of the same size. The Rollei 20943 can hold up to 3.5 kg and weighs 1100 g. It comes with a 3/8" adapter.

Rollei 20943 is a multifunctional photographic equipment for cameras and camcorders. It can be used as a monopod, stabilizer, microphone boom, flashlight holder, and more. The Rollei 20943 is made of aluminum and has a black finish. It is 77 cm when folded and 165 cm when unfolded. The ball head tolerance is only ±0.05 mm, so the locking strength is larger than other ball heads of the same size. The Rollei 20943 can hold up to 3.5 kg and weighs 1100 g. It comes with a 3/8" adapter.

Rollei Mogopod 1
www.rollei.com
exclusively made for Rollei
I like – on
facebook.com/rollei
Product information
Multifunctional photographic equipment for cameras and
camcorders
Can be used as monopod, stabilizer, microphone boom,
flashlight holder etc.
For use with most cameras and accessories
Contains: Mogopod main section, 3-legs, ball head, 3/8“ Adapter
Rollei Mogopod 1 is made
for photography Hobbyists
and Professionals. It is an easy
to take and multifunctional
photo graphic equipment, with
a special fast adjust system
and two different top exten-
sions. With the Mogopod 1
there is no more need for
complex photographic
accessories.
Technical data
Material Aluminum
Colour Black
Length unfolded: 165 cm | folded: 77 cm
Ball Head Tolerance only ± 0.05 mm
Load max. 3.5 kg
Weight 1100 g
Subject to technical changes.
Extensions
The Mogopod 1 comes with two different top
extensions with 3/8“ screw or 1/4“ screw. With these
extensions all kind of video or camera equipment
can be connected to the Mogopod 1.
Fast Adjustment System
The Mogopod 1 has a
unique drive system for a fast
adjustment of the height. It can
be used as monopod, flashlight
holder and microphone boom. Since
the Mogopod 1 can be stretched out
and draw back smoothly, it also can
be used as a camera crane.
Ball Head
With the special ball head
provided in the Mogopod 1,
it can not rotate in horizontal
direction. The size tolerance
of machining accuracy is
± 0.05 mm, so the locking
strength is larger than from
others with the same head
size.
3-legs
The Mogopod 1 adopts the unique iFootage 3-legs
locking system. You only need to open or close the
legs, then twist the button at the bottom, and the
locking is completed.
Surface
The Mogopod 1 is covered by
foam rubber with high stabi-
lity and long term resistance.
This makes the handle softer
and more flexible and works
also sound absorbing and
heat insulating.
Mark
With precise marks on the tube and
a convenient locking system. The
marks are helpful to adjust the right
height and can be used also as a
measure tool.
1100 g 3.5 kg
24
Month Warranty
and Replacement
for DSLR
165 cm77 cm
  • Page 1 1

Rollei 20943 Datasheet

Category
Tripods
Type
Datasheet

Rollei 20943 is a multifunctional photographic equipment for cameras and camcorders. It can be used as a monopod, stabilizer, microphone boom, flashlight holder, and more. The Rollei 20943 is made of aluminum and has a black finish. It is 77 cm when folded and 165 cm when unfolded. The ball head tolerance is only ±0.05 mm, so the locking strength is larger than other ball heads of the same size. The Rollei 20943 can hold up to 3.5 kg and weighs 1100 g. It comes with a 3/8" adapter.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI