Trapeze Networks MP-632-01 Datasheet

Brand: Trapeze Networks

Model: MP-632-01

Category: WLAN access points

Type: Datasheet

This manual is also suitable for

802.11n dual-radio 3x3 MIMO

outdoor access point designed

for high-performance client access,

long distance bridging, and mesh

services.

Mobility Point

MP-632

DATA SHEET

Mobility Point MP-632

The Mobility Point family

provides access point,

bridging and wireless mesh

services for indoor and

outdoor deployments of

Smart Mobile wireless LANs.

The Trapeze Networks outdoor MP-632 is a high

speed dual radio 802.11n (3 x 3) Multiple Input

/ Multiple Output (MIMO), outdoor access point.

It has maximum aggregate data rates of up to

600 Mbps and features 10/100/1000 Gigabit

Ethernet connectivity and a dedicated 48VDC

power port.

The MP-632 comes in a ruggedized, weather-

proof enclosure suitable for extreme outdoor

environments. It complies with NEMA4X and

IP67 standards for corrosion resistance and fea-

tures built-in lightning protection for antenna

ports, as well as surge protection for Ethernet

and power ports. It also has automatic ther-

mal management inside the access point and

includes RSSI meter functions on LEDs for easy

antenna alignment in the field.

The MP-632 complements other Trapeze

Networks’ indoor and outdoor access points by

delivering the same rich enterprise class feature

set, with the same operations model, outdoors.

With Smart Mobile technology, WLAN coverage

and secure mobility can now be extended across

the campus, enabling wireless users to stay con-

nected as they roam from building to building.

In addition to traditional access point function-

ality, the MP-632 can also serve as high speed

Mesh AP, Mesh Portal, or WDS Bridge to extend

the reach of enterprise WLANs. Furthermore,

the MP-632 can support such functionality in

either point-to-point or point-to-multipoint

topologies, allowing maximum flexibility within

a mesh or bridged environment. In mesh portal

mode, the MP-632 acts as the gateway node to

the wired network, advertises services to mesh

access point nodes, and enforces firewall, access

and quality of service (QoS) policy, simultane-

ously performing broadcast suppression—all of

which serve to optimize RF spectrum utilization

in the mesh.

The MP-632 can be configured with one radio

for client services and the other for wireless

backhaul or mesh service, or in any hybrid com-

bination desired in either the 2.4 GHz or 5 GHz

bands. A variety of external antenna options

ensure that the RF coverage area can be tailored

to meet access requirements including long

distances.

Smart Mobile intelligent switching is supported

in all mesh modes, enabling each mesh node to

provide the shortest, least congested path to the

destination over encrypted secure mesh links.

The MP-632 can also be used in a dedicated

bridging mode, to provide seamless connectivity

between buildings without the expense of lay-

ing new cable.

Mobility Point MP-632

Mobility Point MP-632 (continued)

The MP-632 plays a key role in rogue and

intrusion detection as well as denial-of-service

(DoS) attack detection. ActiveScan allows

MPs to fulfill a dual role. They scan all 802.11

bands, channels and VLANs while simultane-

ously providing wireless connectivity to mobile

clients. SentryScan allows MPs or individual

MP radios to act as dedicated sentries, provid-

ing nonstop scanning.

The MP-632 uses the same Mobility System

Software™ as all other Trapeze Mobility Points.

For more information about the security and

networking capabilities of the MP-632, please

read the Mobility System Software datasheet.

The MP-632 is simple to deploy and easy to

manage and supports any kind of service -

data, voice, video and location - over Wi-Fi.

It automatically calculates the data integrity

and RF signal strength of the wireless channel

and continually tunes optimal RF channel and

transmit power, while enforcing the prioritiza-

tion of delay-sensitive voice and other critical

applications. Wi-Fi Multimedia (WMM) or

SpectraLink™ Voice Priority (SVP) can be con-

figured to ensure optimal QoS for voice traffic.

Policies allow per user, protocol or class-of-

service (CoS) mapping.

Key Features

Radios

Dual radios • 802.11a/n (5GHz) and 802.11b/g/n (2.4GHz) concurrent operation

Scalability

Clients • Supports up to 500 simultaneous clients

Encryption • Dedicated hardware-based line-rate encryption for certified operation of WPA (TKIP), WPA2, (AES), 40-bit WEP,

128-bit WEP, and Dynamic WEP with per session rotating keys

Bridging & Mesh

Wireless Bridging • Point-to-point (P-P) and Point-to-Multipoint (P-MP) operations

Wireless Backhaul • Point-to-point (P-P) and Point-to-Multipoint (P-MP) operations

Enterprise Ethernet Mesh Service • Mesh portal operation

• Mesh access point operation

802.11n

• 3 x 3 MIMO (3 Radio Transmit and 3 Radio Receive chains) with two spatial streams

• 20 MHz and 40 MHz channels

• PHY data rates up to 300 Mbps per radio. 600 Mbps aggregate total

• Adaptive Frame Aggregation [L2 (MPDU-Aggregation) and L3 (MSDU Aggregation)]

• Maximal Ratio Combining (MRC)

• Cyclic Delay Diversity (CDD)

Security

Physical Security • Safe tamper-proof design with completely sealed enclosure

• No data, security credentials or encryption keys stored locally

• No console port; no local access possible

• If stolen, no configuration information or data goes with it

• Stolen AP can be “blacklisted”

WIDS/WIPS • Either radio can be configured independently for ActiveScan or SentryScan

Installation

Mounting • Wall/Pole mount bracket attaches to triangular swivel collar on AP for flexible positioning

Powering • Choice of two environmentally hardened outdoor power supplies

• Dedicated 48VDC power port on ruggedized 8-pin (male) DIN connector

RF Planning • Outage resiliency planning for RF Auto-Tuning using RingMaster

Specifications

Hardware Specifications

Dimensions (HxWxD) • 11.18 in. (284 mm) x 11.18 in. (284mm) x 5.53 in. (140.5mm)

Weight • 9.8 lbs (4.44 kg) not including mounting brackets and antennas

Interfaces • 10/100/1000 Gigabit Ethernet port for unshielded twisted pair (UTP) connectivity on ruggedized 8-pin DIN connector

• Six external, N-type female jacks for external 802.11 a (5GHz) and 802.11 b/g (2.4 GHz) antennas (ordered separately)

• Support for multiple antenna types allows flexibility in placement and orientation to suit application specific needs

Environmental • Operating temperature: -40°C to 55°C

• Storage temperature: -40°C to 70°C

• Humidity: 10% - 95% (non-condensing)

• Up to 120mph sustained wind load

Power • -48 VDC, 1.2 Amps, 30 watts peak during dual-radio operation

Status Indicators • 3 LEDs: Power, Radio 1, and Radio 2, indicate activity and various states

• LEDs also indicate measured RSSI during antenna alignment

802.11n Radio Specifications

Operating Frequency • 2.4 GHz to 2.484 GHz and 5.15 GHz to 5.85 GHz

Modulation • Orthogonal Frequency Division Multiplexing (OFDM)

Transmit Power • Based on regulatory domain, up to 16 dBm in 2.4 GHz, up to 15 dBm in 5 GHz

Configurable Association Rates • 11n rates: Modulation Coding Scheme MCS 0 – MCS 15 (6.5Mbps – 300Mbps)

• Legacy Rates: 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, Mbps and 6 Mbps with automatic rate fallback

802.11a Radio Specifications

Operating Frequency • 5.15 GHz to 5.85 GHz

Modulation • Orthogonal Frequency Division Multiplexing (OFDM)

Transmit Power • Based on regulatory domain, up to 15 dBm

Configurable Association Rates • 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps and 6 Mbps with automatic fallback

802.11g Radio Specifications

Operating Frequency • 2.4 GHz to 2.484 GHzModulation

Modulation • Orthogonal Frequency Division Multiplexing (OFDM)

Transmit Power • Based on regulatory domain, up to 16 dBm

Configurable Association Rates • 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps and 6 Mbps with automatic fallback

802.11b Radio Specifications

Operating Frequency • 2.4 GHz to 2.484 GHz

Modulation • Direct-Sequence-Spread-Spectrum (DSSS)

Transmit Power • Based on regulatory domain, up to 17 dBm

Configurable Association Rates • 11 Mbps, 5.5 Mbps, 2 Mbps, and 1 Mbps with automatic fallback

Radio Approvals

Operating Channels • Based on regulatory domain

5GHz Radio Approvals • USA: 47CFR(FCC) Part 15.407

• EU and EFTA: ETSI EN301 893 v1.5.1 DFS2 and DFS3

• Canada: IC RSS-210, Issue 7, RSS-139-1

2.4GHz Radio Approvals • USA: 47CFR (FCC) Part 15.247

• Canada: IC RSS-210, Issue 7, RSS-139-1

• EU: ETSI EN300 328-2, EN301 489-1 and -17

Compliance

Safety and Electromagnetic Compliance • USA: UL 60950-1, current edition, plus all country deviations

• Canada: ICES 003, Class B, UL to CSA C22.2 No. 60950-1

• EU and EFTA: ETSI EN55022:1998 (Class B) and ETSI EN55024, EMC Directive 2004/108/EC

• Australia/New Zealand: AS/NZS CISPR 22, AS/NZS 4268, Class B

Environmental Compliance • WEEE: EU DIRECTIVE 2002/96/EC

• RoHS: DIRECTIVE 2003/95, 2006/122/EC, China-RoHS

• IEC: IP67

• NEMA: Type 4x

• Primary and Secondary lightning protection as per UL497 / UL497A and ITU K44 / K45 for 48VDC / Ethernet port only

Standard Compliance • 802.3i 10BASE-T Ethernet

• 802.3u 100BASE-TX Fasy Ethernet

• 802.3ab 1000BASE-TX Gigabit Ethernet

• 802.1X Network Access Control and Mutual Authentication

• 802.11 a, 802.11 b, 802.11 g, 802.11 n Wireless Ethernet

• 802.11 e quality of service (QoS)(WMM), call admission control (TSPEC), unscheduled power save delivery (U-APSD)

• 802.11 i Fast Roaming (PMK Cache), encryption (AES/CCMP and TKIP)

• Wi-Fi Alliance Protected Access 1.0 (WPA) and 2.0 (WPA2)

• Wi-Fi Alliance Multimedia (WMM)

• IETF CAPWAP WG Taxonomy and Architecture compatibility

Ordering Information

MP-632-01 • Outdoor 802.11n AP with dual radios: 802.11an and 802.11gn, single Gigabit Ethernet data port, weather-sealing caps for antenna

connectors, brackets for wall or pole mount and environmentally hardened outdoor power supply (100-240 VAC 50-60Hz input) bundle.

Includes AC input cable with stripped ends for either direct wiring or connection to a three-prong plug (plug not included).

MP-632-02 • Outdoor 802.11n AP with dual radios: 802.11an and 802.11gn, single Gigabit Ethernet data port, weather-sealing caps for antenna

connectors, brackets for wall or pole mount and environmentally hardened outdoor power supply (100-240 VAC 50-60Hz input) bundle.

Includes conduit coupling (Heyco 1/2” ID conduit fitting HFC-Z 1/2) for direct connection to 1/2” inside diameter steel conduit.

Optional Accessories

ANT-7360A-OUT • 360° Outdoor dual-band 802.11n omni-directional antenna for 802.11n APs. Has 6 (8dB) gain in the 2.4GHz (5GHz) band; includes mast

mounting kit and one 36” Type N Male to Type N Male low loss cable. Requires one unit for each coaxial connector on the AP.

ANT-74520-OUT • Indoor/outdoor dual-band three-element 802.11n directional panel antenna for 802.11n APs. Has 10.9dB (13.5dB) gain in the 2.4GHz

(5GHz) band; has 45 degree (20 degree) horizontal beamwidth in the 2.4GHz (5GHz) band. Includes articulating wall/mast mounting kit

and three integrated 36” cables with adapters for direct connection to either the MP-632 or the MP-82. Requires only one unit per radio.

For outdoor use, three lightning suppression kits are recommended with this antenna (such as either the ANT-LGTNG-OUT or the

ANT-PROT-OUT).

ANT-77555-OUT • Indoor/outdoor dual-band three-element 802.11n directional panel antenna for 802.11n APs. Has 8dB (10.7dB) gain in the 2.4GHz (5GHz)

band; has 75 degree (55 degree) horizontal beamwidth in the 2.4GHz (5GHz) band. Includes articulating wall/mast mounting kit and three

integrated 36” cables with adapters for direct connection to either the MP-632 or the MP-82. Requires only one unit per radio. For

outdoor use, three lightning suppression kits are recommended with this antenna (such as either the ANT-LGTNG-OUT

or the ANT-PROT-OUT).

ANT-5007-OUT • Outdoor two-element cross-polarized 802.11n high-gain directional panel antenna for use in the 5GHz band with 802.11n APs. Has

23.5dB gain, 7 degree vertical beamwidth, and 7 degree horizontal beamwidth. Includes articulating wall/mast mounting kit and two 36”

Type N Male to Type N Male low loss cables. Requires only one unit per radio. For outdoor use, two lightning suppression kits are

recommended with this antenna (such as either the ANT-LGTNG-OUT or the ANT-PROT-OUT).

ANT-PROT-OUT • N-Male to N-Female Lightning Protector for direct mount onto MP-632. Requires one unit for each coaxial cable on the antenna.

www.trapezenetworks.com

DS_MP632_092409

Trapeze Networks MP-632-01 Datasheet

Brand: Trapeze Networks

Model: MP-632-01

Category: WLAN access points

Type: Datasheet

This manual is also suitable for

Download PDF

report

Trapeze Networks MP-632-01 Datasheet

This manual is also suitable for

Trapeze Networks MP-632-01 Datasheet

Related papers

Other documents