Makita BHR261TRDE Datasheet

Category
Rotary hammers
Type
Datasheet
Satisfying the professional’s needs
Product information
www.makitauk.com
Details correct as of:
Makita reserve the right to change specifications at any time owing to their policy of constant improvement.
Accessories shown are not necessarily supplied.
BHR261TRDE
36v LXT SDS-PLUS Rotary Hammer
Noise sound pressure 91 dB(A)
Impact energy per stroke 2.5 Js
Battery Type Lithium-Ion
Vibration: Drilling 3 m/sec²
Charging Time 22 min
Vibration K factor 1.5 m/sec²
Vibration: Hammer Drilling 15 m/sec²
Max. in masonry 26 mm
No Load Speed 0 - 1200 rpm
Vibration: Chiselling 11 m/sec²
Max. in steel 13 mm
Max. in wood 32 mm
Blows per minute 0 - 4800 bpm
STANDARD EQUIPMENT:
194873-2 36V Li-ion Battery, DC36RA 36V BATTERY CHARGER
22 minute charge time with the air cooled Makstar Optimum Charging System.
Conveniently located push button for forward and reverse.
High comfort grips.
Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt
Ni-MH battery.
LED job light with afterglow.
Triple operation mode: Rotary only, hammer only and rotary hammer.
Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions.
Vibration absorbing handle reduces hand fatigue.
One-touch sliding chuck for easy bit changes.
Torque limiter: The drill stops when the bit hits against reinforcements.
6-11-2012
  • Page 1 1

Makita BHR261TRDE Datasheet

Category
Rotary hammers
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI