5
Corded use
1 Be sure the power switch is in the off
position.
2 Plug the clipper into the electrical
socket.
3 Slide the power switch to the on
position. When finished clipping, turn
the clipper off by sliding the power
switch down.
Oil (use blade oil)
1 To lubricate the blades use one or
two drops of oil and spread over
the cutters. Do not overoil. Excess oil
will cause damage to your product.
Care and maintenance
• Never clean, remove or replace trimmer
guide with the motor on.
• Do not apply any pressure to cutters.
• Do not touch the cutters with hard
objects as this may damage the cutter.
• Do not use while bathing, showering or
immersing the unit in water or other
liquids as damage to the trimmer may
occur.
• Never use harsh or corrosive cleaners
such as benzene or bleach.
Important safeguards
When using your appliance, basic safety
precautions should always be followed.
1 Read all instructions carefully.
2 Use the appliance for its intended use
only.
3 To protect against the risk of electric
shock, do not immerse the appliance in
water or other liquids.
4 Before use, make certain blades are
aligned properly.
5 Do not use this appliance with damaged
or broken combs or with teeth missing
from the blades as injury may occur.
6 Never use the trimmer on wet hair.
7 Switch off before placing down.
8 Switch off before fitting or removing
attachments.
9 In the interests of environmental safety
dispose of batteries safely.